#meta full request: /FDC/fdc_parms:0:default:2013-01-17_19-02-28
#meta variation: default
#meta created: 2013-01-17 19:02:28
#meta run range: 0 - inf.
#meta author: anonymous

#
# electron drift velocity
# dead wire radius
# other dead wire radius
# threshold in keV
# threshold in fC
# electron charge in fC
# diffiusion speed cm^2/s --> 200 microns at 1 cm
# The error on the drift time in the FDC. The drift times
# for the actual FDC hits coming from the input file
# are smeared by a gaussian with this sigma.
# 200.0/55.0*1.0E-9;	# in seconds
# The error in the distance along the wire as measured by
# the cathodes. This should NOT include the Lorentz
# effect which is already included in hdgeant. It
# should include any fluctuations due to ion trail density
# etc. 150.0 microns  [microns]
#FDC_CATHODE_SIGMA 50.0
# number of sigmas above pedestal for cutting FDC hits
# The FDC pedestal noise is used to smear the cathode ADC
# values such that the position along the wire has the resolution
# specified by FDC_CATHODE_SIGMA.
# units in pC (calculated from FDC_CATHODE_SIGMA in SmearFDC)
#FDC_PED_NOISE 1.527
# Time window for acceptance of FDC hits units in nanoseconds
# Fraction of FDC hits to randomly drop (0=drop nothing 1=drop everything)

#& FDC_DRIFT_SPEED FDC_WIRE_DEAD_ZONE_RADIUS FDC_STRIP_DEAD_ZONE_RADIUS FDC_ACTIVE_AREA_OUTER_RADIUS FDC_ANODE_CATHODE_SPACING FDC_TWO_HIT_RESOL FDC_WIRES_PER_PLANE FDC_WIRE_SPACING FDC_STRIPS_PER_PLANE FDC_STRIP_SPACING FDC_STRIP_GAP FDC_MAX_HITS FDC_K2 FDC_STRIP_NODES FDC_THRESH_KEV FDC_THRESH_STRIPS FDC_ELECTRON_CHARGE FDC_DIFFUSION_COEFF FDC_TDRIFT_SIGMA FDC_CATHODE_SIGMA FDC_THRESHOLD_FACTOR FDC_PED_NOISE FDC_TIME_WINDOW FDC_HIT_DROP_FRACTION
.0055 3.5 5.0 48.5 0.5 25. 96 1. 192 0.5 0.1 100 1.15 3 1. 0.001 1.6022e-4 1.1e-6 1.0e-9 150.0 4.0 0.2 1000.0 0.0;