#meta full request: /GEOMETRY/HDDS-1_0.xsd:0:mc_generic:2017-11-20_16-56-29
#meta variation: mc_generic
#meta created: 2017-11-20 16:56:29
#meta run range: 0 - inf.
#meta author: sdobbs

#Copied from HDDS, v3.12

#& xml
<?xml version='1.0' encoding='UTF-8'?>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema"
           targetNamespace="http://www.gluex.org/hdds" 
           xmlns="http://www.gluex.org/hdds"
           elementFormDefault="qualified">

<!-- HDDS: HALL D Geometric Detector Specification
     =============================================

     Version:   1.0
     Date   :   November 25, 2006
     
     This xml schema defines the structure and syntax for
     Hall D Geometric Detector Specification xml files. 
     Documentation of the elements is given below.

     The basic structure of this document was borrowed
     from the AGGD project of the Atlas collaboration.


1) General structure of a detector description
   ===========================================

  o The HDDS element is the main container where all detector description
    information is maintained and managed. 

  o Currently one may find within the HDDS element :
      o materials   : definition of a set of materials
      o section     : definition of a section (main division of the detector)
      o region      : definition of tracking properties (eg. magnetic fields)

  o The schema provides a main version id. This corresponds to a constraint
    (named version).  All "materials", "sections", "regions" and the
    overall "HDDS" element must individually specify in their attributes
    a matching version value. (eg. version="v4")

  o General rule for angle definition for all XML statements:

     a) Right handed coordinate system is used.
          Explicitly this means that:  
            Z-axis angle rotation should be positive when rotation is
              made in the direction from X to Y in the short way 
            Y-axis angle rotation should be positive when rotation is
              made in the direction from Z to X in the short way
            X-axis angle rotation should be positive when rotation is
              made in the direction from Y to Z in the short way
     b) All angles corresponds to "active" rotation, i.e. the object is rotated
        in the fixed coordinate system
        (NOT "passive" rotation when the axis are rotated and the object
         is fixed) 

1.1) Materials
===============

  The materials element collects together all of the materials information
  in the document under a single container.  Attributes of materials are :

            version     : version of the materials description
            date        : last modification date
            author      : last modification author
            specification : version of the materials tag schema

  o Materials can be elements or composites.
  o Elements are identified using a long name. Attributes are

            symbol      : the conventional symbol name
            z           : mean number of protons
            a           : atomic weight
  o Composites are identified using a long name and provide a density (g/ml).
    They are made of a set of addmaterial elements, each with attributes

            material     : an IDREF to an already defined material or element
            fractionmass : a percentage of this material in the composite 
                           (use for both materials and elements).
            natoms       : the number of atoms of this element in the composite
                           (elements only).  Use either natoms or fractionmass.
  o Contents of elements and composites are a sequence of parameters with
    names taken from the following list.  Any element that is valid within
    a parameter block (see section 1.3) is allowed.

            density     : density 		     (g/cm^3)
            radlen      : radiation length           (g/cm^2)
            collen      : nuclear collision length   (g/cm^2)
            abslen      : nuclear interaction length (g/cm^2)
            dedx        : minimum-ionization dE/dx   (MeV/g/cm^2)
  o Elements and composites may have optical properties associated with
    them which indicate how optical photons (ie. visible light) interacts
    with the  material.  Optical properties are enclosed within the
    optical_properties container element.  They are specified as a list of
    specify elements.  If optical_properties is present, it must enclose at
    least two specify elements.  The arguments to specify are as follows.

           E        : photon energy (eV, required)
           refindex : refractive index (required for dielectrics, default 0)
           abslen   : absorption length (cm, dielectrics only, default 0)
           effic    : detection efficiency (meaning is user defined, default 0)
           reflect  : reflection coefficient (metals only, default 0)
           smooth   : smoothness parameter (1=perfect, 0=rough, default 1)

1.2) Sections
==============

  A section forms the basic sub-division of the entire detector. It
  holds the implementation of the geometry for this particular piece
  of detector. A section is primarily made of "volume" elements but
  also may receive a set of named and typed parameter blocks (used to specify
  constants).

  Attributes of section are :

            name        : (short) unique name to identify the section
            version     : internal version of the section
            date        : last modification date
            author      : last modification author
            top_volume  : envelope volume corresponding to the section
            specification : version of the section tag schema

1.3) Parameters
===============

  Parameters are named and typed values. Possible types are :

        int		 : an int value
        real             : a float value
        string           : a text string
        reference        : an IDREF to a parameter block.

        int_array        : an array of values
        real_array       : an array of values
        string_vector    : a vector of text strings
        reference_vector : a vector of IDREFs to parameter blocks.

  Parameters must be defined within named "parameter blocks" which in
  turn can be referenced by any volume. Parameter blocks are defined
  within sections.

  All scalar parameter get their value in the attribute named "value";
  array parameters get their array of values within the single
  attribute named "values"; vector parameters get their values as a
  set of member elements.

  It is required to specify a semantics for the values using a "unit"
  attribute (available for both scalar and arrays). Current possible
  units are:

     m cm mm              for lengths
     deg rad mrad 	  for angles
     percent              for fractions

   or simply

     none


  some examples are:

          <real name="chamber_width" value="12.56" unit="mm" />
          <string name="chamber_type"  value="RPC" />

          <real_array name="ratios" unit="percent" values="10 15 27 33" />

          <string_vector name="authors">
            <string_data value="Christian Arnault"/>
            <string_data value="Stan Bentvelsen"/>
            <string_data value="Jean-Francois Laporte"/>
            <string_data value="Steven Goldfarb"/>
            <string_data value="Marc Virchaux"/>
            <string_data value="Christopher Lester"/>
          </string_vector>


1.4) Volumes
============

  The 'volume' is a generic name for a geometric object. Effective
  volume are organized as a hierarchy of types.

        1) solid volume (have a "material" and may be "sensitive"))
           |-> box      3-rectangle
           |-> tubs	tube section
	   |-> eltu     elliptical tube
           |-> trd	trapezoid
           |-> pcon	poly-cone (sequence of joined cons)
           |-> pgon	polyhedron (sequence of joined polygons)
           |-> cons 	cone section
           +-> sphere	sphere (or a section thereof)

        2) composition (build a logical composition)

        3) boolean volume
           |-> union
           |-> intersection
           +-> subtraction

        4) stack (pile up other volumes)
           |-> stackX
           |-> stackY
           +-> stackZ

  All kinds of volumes have at least the following attribute:

         name       : their identifier
         parameters : an IDREF to a parameter block.

  Parameter blocks are meant to describe non-geometrical information
  or geometrical details that cannot or should not be described using
  the generic model.

  For example, the inner-structure of the SCT crystals contain
  information about the strip-pitch, etc. The use and content of these
  parameters is left free.

  A volume in itself is not positioned. Rather, compositions, boolean
  volumes or stacks combine "position" elements which role is to
  position a volume (see paragraph on positions)
         

1.4.1) Solid volume:
====================

  A basic geometry unit; Specialized types provide for specific shapes
  (boxes, tube sections, trapezoids and cone sections). A solid
  references a material, and may be declared as "sensitive" (which
  opens the not-yet-implemented capability of producing hits).


1.4.1.1) Box (element tag "box") :

  A Box is a cuboid of given total lengths X,Y and Z. The Box is
  centered on the origin with sides parallel to the x/y/z axes.

  NB: Note the factor two difference in the dimensions wrt the 'Geant4 - Box'

  Its dimensions are given by :

                      X_Y_Z="X Y Z"

1.4.1.2) Trapezoid (element tag "trd") :

  A Trd is a trapezoid with the x and y dimensions varying along z. Its
  dimensions are given by

                      Xmp_Ymp_Z="Xm Xp Ym Yp Z" 
                      inclination="alph_xz alph_yz"

  with:
                      Xm    Length along x at the surface positioned at -Z/2
                      Xp    Length along x at the surface positioned at +Z/2
                      Ym    Length along y at the surface positioned at -Z/2
                      Yp    Length along y at the surface positioned at +Z/2
                      Z     Length along z axis

                      alph_xz  Inclination angle in the x-z plane
                      alph_yz  Inclination angle in the y-z plane

  NB: Note the factor two difference in the dimensions wrt the 'Geant4 - trd'

1.4.1.3) Tube segment (element tag "tubs")

  A tube or tube segment with curved sides parallel to the z-axis.
  The tube has a specified total-length along the z axis, about which
  it is centered, and a given minimum and maximum radius. A minimum
  radius of 0 signifies a filled tube / cylinder. The tube segment is
  specified by starting and delta angles for phi, with 0 being the +x
  axis, PI/2 the +y axis. A delta angle of 2PI signifies a complete,
  unsegmented tube/cylinder.  The origin is centered in the middle of
  the tube.

  Its dimensions are given by

                     Rio_Z="Ri Ro Z"
                     profile="PhiS dPhi"   (defaulted to "0 360") 

  with

                     Ri    Inner radius
                     Ro    Outer radius
                     Z     Total length in Z
                     PhiS  Starting angle phi
                     dPhi  Delta angle phi

  NB: Note the factor two difference in the length wrt the 'Geant4 - tubs'


1.4.1.4) Elliptical cross-section tube (element tag "eltu")

  It has three parameters:

                     Rxy_Z="Ri Ro Z"

  with

                     Rx    Semi-axis of the ellipse along x
                     Ry    Semi-axis of the ellipse along y
                     Z     Half-length in z


1.4.1.5) Cone segment (element tag "cons")

  A cons is, in the general case, a Phi segment of a cone, with length
  Z, inner and outer radii specified at -Z/2 and +Z/2. The Phi segment
  is described by a starting Phi angle, and the +dPhi delta angle for
  the shape.

  Its dimensions are given by

                     Rio1_Rio2_Z="Ri1 Ro1 Ri2 Ro2 Z"
                     profile="PhiS dPhi"               (defaulted to "0 360") 

  with :

                     Ri1     inside radius at  -Z/2
                     Ri2     inside radius at  +Z/2
                     Ro1     outside radius at -Z/2
                     Ro2     outside radius at +Z/2
                     Z       half length in z
                     PhiS    Starting angle phi
                     dPhi    Delta angle phi


1.4.1.6) Polycone segment (element tag "pcon" )

  A pcon is, in the general case, a Phi segment of a polycone. The
  polycone is build from a series of consecutive cones.

  The phi-segment is given by the attribute
      
                     profile="PhiS dPhi"               (defaulted to "0 360") 

  with :

                     PhiS    Starting angle phi
                     dPhi    Delta angle phi

  The edges of the polycone are given by a series of XML element 'polyplane',
  which are children of 'pcon'. The 'polyplane' dimensions are given
  by the attribute:

                     Rio_Z="Ri Ro Z"

  with :

                     Ri     inside radius at  point Z
                     Ro     outside radius at  point Z
                     Z      position z


1.4.1.7) Polyhedron solid (element tag "pgon" )

  A pgon is similar to the polycone (element tag "pcon") except that
  its boundaries are planar segments instead of conical ones.

  The phi-segmentation is given by the attribute
      
                     profile="PhiS dPhi"               (defaulted to "0 360") 

  with :

                     PhiS    Starting angle phi
                     dPhi    Delta angle phi

  and by the number of phi-segments specified using the attribute

                     segments="NNN"                   (no default)

  with :

                     NNN    number of (equal) phi segments

  The edges of the polyhedron are given by a series of XML element 'polyplane',
  which are children of 'pgon'. The 'polyplane' dimensions are given
  by the attribute:

                     Rio_Z="Ri Ro Z"

  with :

                     Ri     inside radius at  point Z
                     Ro     outside radius at  point Z
                     Z      position z

  where "radius" of a planar boundary is defined to be the perpendicular
  distance from the boundary to the z-axis.

1.4.1.8) Sphere segment (element tag "sphere" )

  A sphere segment is a section of a sphere that is delimited by boundaries
  of fixed radius, polar angle and azimuthal angle.

  The bounds of the sphere segment are given in three compound attributes:
      
                     Rio="Ri Ro"
                     polar_bounds="Theta0 Theta1"      (defaulted to "0 180")
                     profile="PhiS dPhi"               (defaulted to "0 360") 

  with :

                     Ri      radius of inner surface
                     Ro      radius of outer surface
                     Theta0  lower bound in theta
                     Theta1  upper bound in theta
                     PhiS    Starting angle phi
                     dPhi    Delta angle phi



1.4.2) Composition
==================

  Construct a new volume which consists of positioning several volumes
  (defined elsewhere in HDDS) placed at various places w.r.t. the
  reference frame of this new entity.

    The positioning of volumes proceeds via position elements:

        posXYZ
        posRPhiZ
        mposR
        mposPhi
        mposX
        mposY
        mposZ
  
  Volume are positioned according to the coordinates specified in the
  above positioning elements w.r.t. the implicit coordinate system of
  the composition (which defines the reference)..

  In general, there is a priori no defined volume corresponding to
  this entity i.e. it is a juxtaposition of volumes. Its envelope has
  to be computed from the juxtaposed volumes. However one can force
  this envelope to be one specific (elsewhere defined) volume.  Then
  all positioned volume will be placed into this "envelope" volume.

1.4.3) Stacks
=============

  Constructs a new volume which consists of several other volumes
  piled up along one given axis.

   Stacks may be defined along
     the X axis (element tag "stackX")
     the Y axis (element tag "stackY")
     the Z axis (element tag "stackZ")

  The positioning of volumes proceeds via elements:

         axisPos    : a single volume is added to the pile. A
                      rotation (one angle) along the same axis as well as
                      a transverse displacement may also be specified.

         axisMPos   : a multiple position of a given volume. A
                      rotation (one angle) along the same axis as well as
                      a transverse displacement (both applicable to all copies) 
                      may also be specified.

         Offsets along the stack axis can be specified either using 

         a shift : distance between the coordinate origin of the stack and the
                   coordinate origin of the first stacked volume, or between
                   the coordinate origin of the previously stacked volume and
		   the coordinate origin of the first stacked volume.

         a gap   : distance between the coordinate origin of the stack and the
                   lowest dimension of the first stacked volume, or between the
                   highest dimension of the previously stacked volume and the
                   lowest dimension of the first stacked volume.


     Coordinate system: The coordinate system of the stack can be
                        defined in two ways, that are selected by 
                        the attribute 'origin'.
 
        origin="atStart" (default)
                        The coordinate-system of the stack is defined before
                        any volumes are positioned in the stack, and
                        it is fixed (i.e. independent of the contents
                        of the stack).
                        For example, in the absence of the gap0 or
                        shift0 attributes, the origin of the
                        coordinate system coincides with the edge of
                        the stack.

        origin="atCenter"   After the stack is built an additional shift
                        along the direction axis is applied to the
                        coordinate system of the stack, such that it
                        lies in the center of the stack (including
                        gaps). The 'center' is defined as the
                        geometric middle between two planes
                        perpendicular to the direction axis, with the
                        planes just touching the extreme edges of the
                        stack (which include gaps).  Note that the
                        coordinate system always lies on the direction
                        axis, and does not change in the perpendicular
                        direction.  
                        To avoid ambiguities when gap0 is smaller than zero:
                        Define point A at the "stack start" (from which gap0 is 
                        measured), and define the last physical part of the
			stack as B. The center of the stack is then defined at 
                        position (A+B)/2.  In the simple case of zero gap0
                        and shift0, the coordinate system is shifted to
                        the center of the stack of volumes.
 

1.4.4) Boolean volumes (union, intersection and subtraction)
============================================================
   NOTE: Boolean volumes are not currently supported by HDFast or HDGeant.

     union        : Union of several volumes

     intersection : Intersection of several volumes

     subtraction  : Subtraction of several volumes. All the volumes 
                    (but the first) are subtracted from the first

   The positioning of volumes within boolean operation can only be
   done via single positioners, say:

       posXYZ
       posRPhiZ

   Note that it is required that the materials of the boolean volumes
   are identical. This is however not checked (or forced) within the
   XML syntax, and is left to the responsibility of the user (and the
   application).


1.5) Positioning of volumes
===========================

   Each volume (Solid volumes, compositions, unions, etc) are
   positioned relatively to other volumes using the "position"
   elements. A given volume may referenced (through its name) in
   several position operations.

   Position operators are organized as a hierarchy of types as follows

         Single positions
           | posXYZ
           | posRPhiZ
         Multiple positions
           | mposR
           | mposPhi
           | mposX
           | mposY
           | mposZ
         Axis positions
           | axisPos
           | axisMPos

    o Single positions can be used in compositions or boolean volumes

    o Multiple positions can only be used in compositions

    o Axis positions can only be used in stacks


1.5.1) Common properties

   All positioning operators share some properties :

     attributes :

        volume      : the volume they are positioning.
        unit_length : the units used to specify the coordinates.
        unit_angle  : the units used to specify rotation angles.

     member elements :

        identifiers : a set of identifier specifications (see paragraph on 
                      identifiers for details)


   Single positions and Multiple positions may provide a local rotation 
   (specified as three angles around X, Y and Z)

   The rotation around X,Y,Z axis is defined by rot="a b c"
          the X rotation of a angle is done first 
          the Y rotation of b angle is done second 
          the Z rotation of c angle is done last.


1.5.1.1) posXYZ

     posXYZ: single positioning of a 'generic' volume, in cartesian
             coordinates.  The coordinate system is implicitly defined by
             the posXYZ (take a coordinate system, and place the volume in
             it with a given set of coordinates and rotations)

      specific attributes:

      X_Y_Z : X, Y and Z coordinates of the volume inside the
              coordinate system   
          The volume is rotated before it is placed.


1.5.1.2) posRPhiZ

      posRPhiZ: single positioning of a 'generic' volume, in cylindrical
                coordinates.

      specific attributes:

      R_Phi_Z : Radius, Phi (wrt the X-axis) and Z of the volume
                (default is 0 0 0).
      S       : Move along the "ortho-radial" coordinate S 
                before placing the object (default is 0).
      impliedRot : (true | false) rotation of volumes to point to center
                coordinate system (true) or not (false).
       
      The volume is rotated before it is placed.
        

1.5.1.3) mposPhi

      mposPhi: multiple positioning of a 'generic' volume, around the
               Z-axis at a given radius R, with incremental values of phi.

      specific attributes:

      ncopy : Number of volumes to be placed
      Phi0  : Start value of phi (wrt the x-axis).
      dPhi  : If given:      incremental value of phi
              If absent:     incremental value of phi is set
                             to 2*PI/ncopy 
      R_Z   : Radius R and Z-coordinate
      S     : Move along the "ortho-radial" coordinate S 
              before placing the objects (default is 0).
      impliedRot : (true | false) rotation of volumes to point to center
              coordinate system (true) or not (false).

1.5.1.4) mposR/X/Y/Z

     mposR, mposX, mposY, mposZ: multiple positioning of volumes along
                                 the R, X, Y, Z directions respectively.

     mposR:  positioning along the radius R with fixed (Z,phi). 
     mposX:  positioning along the X-axis with fixed (Y,Z). 
     mposY:  positioning along the Y-axis with fixed (X,Z). 
     mposZ:  positioning along the Z-axis with fixed (R,phi) or (X,Y). 

     ncopy      : Number of volumes to be placed
     R0,X0,Y0,Z0: Starting values in R,X,Y,Z
     dR,dX,dY,dZ: Increment values in R,X,Y,Z
     Z_Phi      : transverse displacement for mposR
     R_Phi      : transverse displacement for mposZ
     X_Y        : transverse displacement for mposZ (alternate for R_Phi)
     Y_Z        : transverse displacement for mposX
     Z_X        : transverse displacement for mposY
     S          : Move along the "ortho-radial" coordinate S 
                  before placing the objects.

     Note that the origin of the coordinate system is implicitly
     defined in the 'transverse' direction by the Z_Phi, R_phi, X_Y, Y_Z or Z_X
     attributes. In the positioning-direction it is defined by the
     attributes R0, X0, Y0 or Z0. 


1.6) Regions
==============

  A region is a set of properties relevant to particle tracking that are
  shared by a number of detector elements.  The most common use of regions
  is to specify the magnetic field.  The detector elements that belong to
  a region are usually associated by spatial proximity but may be widely
  separated in the geometry tree.  Regions have been introduced because of
  this, to allow an arbitrary subset of the volumes in a geometry heirarchy
  to share a common set of tracking properties without requiring that they
  have a common ancestor that also belongs to the region.  Once a volume
  is assigned to a region, all of its descendents in the geometry tree
  inherit those properties as their default values, with nearer ancestors
  taking precedence over more remote ones.  These inherited defaults can
  be overridden in a child by joining a region of its own where they are
  explicitly assigned.  The top node in the geometry tree belongs to the
  implicit default region, which has no magnetic field and global default
  values for all tracking properties.  Any given volume may itself belong
  to at most one region.

  The association of a volume to a region occurs in the place where the
  volume is declared, i.e. "box", "tube", etc.  This is done using the
  <apply> tag that defines how the region coordinate system is related
  to the local coordinate system of the new volume.  This is the reverse
  of what one might expect on the basis that regions contain volumes and
  not vice versa, but doing it this way has advantages for being able to
  use region specifications more than once, eg. in the case of having
  multiple identical magnets in a beam line.  For details on the syntax
  for assigning a volume to a region, see section 1.6.4 below.

  A region may be assigned a uniform magnetic field, or a an arbitrary field
  may be specified in terms of a field map.  A field map is a list of magnetic
  field values (three components) sampled on a regular three-dimensional grid.
  The map data are stored in an external file and loaded into the simulation
  at run time; only the field map metadata are stored in the hdds document.
  At run time the simulation program reads the map data from the file and
  uses the hdds metadata information to determine how to interpolate the
  table to compute values of the field at real space points.

  The top level of the regions description is the "regions" tag.  Its
  attributes are similar to those of the "materials" and "section" tags:

            version     : version of the region description
            date        : last modification date
            author      : last modification author
            specification : version of the region tag schema

1.6.1) Region elements
=======================

  The contents of the regions tag are individual region elements, each of
  which describes a single contiguous region of space containing a magnetic
  field and/or some other set of tracking properties.  The region tag has
  the following attributes:

	    name      : a short descriptive ID of this field region
            modifies  : name of another region to provide default values
	    comment   : a more verbose description

  The region name must be a NMTOKEN type (begin with a letter, contain
  alphanumeric characters and underscores, and contain no spaces) like
  material names and identifier names so that it can be referenced by
  volumes through the region="XXX" attribute.  The properties of a region
  are specified using the content elements described in the next section.
  Any properties that are not specified obtain the default values, either
  those of the modifies="REGION", if given, or the default region if not.
  This attribute was introduced to make it simple to create copies of a
  region which share a common set of properties, but must have private
  values for a subset of their properties.  Creating an empty region
  element with only a modifies="REGION" argument effectively creates an
  alias for "REGION".

1.6.2) Region contents: Bfield descriptions
============================================

  It is foreseen that the region element may be expanded in the future to
  contain a more general description of tracking properties.  At present,
  only magnetic field specifiers are defined.  Only properties that are
  explicitly declared within the region definition are modified from their
  defaults.  Magnetic fields are described using either a uniformBfield,
  a computedBfield, or a mappedBfield element.  A region that has no
  magnetic field is defined using the noBfield tag.  Assigning a region
  with noBfield to a volume results in the same tracking behavior as if
  the volume had no region assignment, i.e. belongs to the default region.
  The noBfield specifier has been introduced to enable volumes that inherit
  a region with a magnetic field from an ancestor to override that behavior
  by specifying their own region with noBfield.  The noBfield tag has no
  attributes.

  The uniformBfield tag supports the following attributes.

	    Bx_By_Bz  : space-separated list of the three Cartesian
			components of the uniform magnetic field.
	    unit      : units for specifying magnetic field, eg. kG, T
			(default is kG).

  The computedBfield tag supports the following attributes.

	    function  : name of the global function that computes the
			magnetic field at a point r.  The syntax of this
			string is user-defined, and may be a global function
			call in some language, a lookup key for a database,
			or some keyword-based selector.  In any case, the
			language-specific interpreter needs to translate
			this string into the function or method invocation
			that is appropriate in that context.
            maxBfield : maximum magnitude of the magnetic field within the
                        range specified by the map
	    unit      : units for the magnetic field values returned by the
			funtion, eg. kG, T (default is kG).

  The mappedBfield element has the following attributes:

	    map       : URL pointing to where the field map values are found.
	    encoding  : indicates how the values are stored, eg. utf-8 for
			a plain-text file, base-64, and so on.
            maxBfield : maximum magnitude of the magnetic field within the
                        range specified by the map
	    unit      : units for specifying magnetic field, eg. kG, T
			(default is kG).

  The mappedBfield requires additional information that explain how to
  interpret the list of field values stored in the map file in terms of
  real space points.  The map file itself contains only a list of floating-
  point triplets (Bx By Bz).  The information regarding their ordering and
  coordinate assignments is provided by the "grid" element.  Each 
  mappedBfield element must contain at least one grid element.  If more
  than one grid element appears within a map element, the same map data are
  reused by associating the map data with a second set of coordinates. 
  This is useful for describing field regions with inherent symmetries.
  For example, a dipole spectrometer map with a mirror symmetry about the
  midplane can be specified by storing only the upper half of the map in
  in a file and then including two grid elements in the mappedBfield tag.

1.6.2.1) grid

  There are two types of grids, cartesian and cylindrical.  Both kinds
  describe regions of space with simple boundaries: cartesian grids are
  defined within a box and cylindrical grids within a tube section (see
  solids element "tubs" below for the definition of a tube section). The
  boundaries of the grid together with the number of samples along each of
  the grid axes are defined by content elements within the grid tag.  The
  grid tag itself only has a single attribute.

	    type      : "cartesian" or "cylindrical"

1.6.2.1.1) Cartesian grid

  The organization of the field data in the map file is defined using a
  sequence of three nested "samples" tags within the containing grid tag.
  The samples tags define the bounds of the grid in terms of lower and
  upper coordinates and the number of samples contained within those bounds.
  The attributes of the samples tags are as follows.

            axis      	: one of "x", "y" or "z".
	    n         	: number of samples along the given axis.
            bounds    	: space-separated list of the lower and upper bounds
			  of the sampled grid along the given axis.
            sense       : whether the sign of the field component corresponding
                          to this axis in the map is "forward" or "reverse",
                          introduced to fold maps with mirror symmetry. 
            unit_length : length unit for bounds attribute [default: cm]
                          for grid points within the cartesian grid box.

  There must be three nested samples tags within each grid tag, with no axis
  values repeated.  The nesting indicates the sequencing of the field data
  contained in the map file.  It is not necessary that the lower bound be
  numerically less than the upper bound; the coordinate order must correspond
  to the order the data are stored in the map file.

1.6.2.1.2) Cylindrical grid

  The organization of the field data in the map file is defined using a
  sequence of three nested "samples" tags within the containing grid tag.
  The samples tags define the bounds of the grid in terms of lower and
  upper coordinates and the number of samples contained within those bounds.
  The attributes of the samples tags are as follows.

            axis      	: one of "r", "phi" or "z".
	    n         	: number of samples along the given axis.
            bounds    	: space-separated list of the lower and upper bounds
                          of the sampled grid along the given axis.
            unit_length : length unit for bounds attribute [default: cm]
                          of r,z grid points within the grid tube section.
            unit_angle  : angle unit for bounds attribute [default: deg]
                          of phi grid points within the grid tube section.

  There must be three nested samples tags within each grid tag, with no axis
  values repeated.  The nesting indicates the sequencing of the field data
  contained in the map file.  It is not necessary that the lower bound be
  numerically less than the upper bound; the coordinate order must correspond
  to the order the data are stored in the map file.

1.6.2.2) Field data

  The field map metadata are stored in hdds, but the data themselves are
  not.  Instead they are saved either in a database or a flat file external
  to hdds.  The field data are represented in the encoding specified in the
  mappedBfield element (see section 1.6.2 above) with one grid point per
  line.  Each line contains three space-separated numbers in free floating
  point format, eg. "6 -2.176 3.4e-5".  The meaning of these three components
  depends upon the grid type.  For a Cartesian grid, they are interpreted as
  B_x B_y B_z.  For a cylindrical grid, they are B_rho, B_phi, B_z.  Note
  that the order of the components is the same regardless of the nesting
  order of the grid points.

1.6.3) Region contents: tracking advisories
============================================

  The region element is supposed to contain any bits and pieces of advice
  that the might be useful to the translator in deciding how to encode the
  geometry for a particular simulation.  Besides electromagnetic fields,
  the rest of this information is advisory only and does not need to be
  heeded by a translator unless it is deemed useful for setting up the
  simulation.  The following advisory tags are supported.

1.6.3.1) Swim

  The "swim" element only makes sense in the case of a region containing
  a mappedBfield.  Its purpose is to advise the tracking code on how to
  integrate the path of a charged particle in the magnetic field.  The
  following attributes are provided.

	    method    : can take on one of the following values
            *) method="helix" [default] is appropriate if the field is close
			enough to uniform that a charged particle path is 
			approximated well by helical track segments.
	    *) method="RungeKutta" is appropriate if the field is sufficiently
			nonuniform that charged particle tracks should be
			found by numerical integration of the Lorentz equation.
            maxArcStep: maximum step size before needing to sample the field
                        again, specified in terms of the angle subtended by
                        the arc segment, default is 1.
            unit_angle: units for maxArcStep [degrees].

1.6.4) Region examples
=======================

  <region name="beamlineDipoles" comment="photon beam dipole field">
    <uniformBfield Bx_By_Bz="0 0 2" unit="kG"/>
  </region>
 
  <region name="pairSpectrometer" comment="photon beam pair spetrometer">
    <computedBfield function="gufld_DB(r,B)" maxBfield="2.5" unit="kG"/>
  </region>
 
  <region name="taggerDipoles" comment="tagging spectrometer field map">
    <mappedBfield map="file://taggermap.dat" maxBfield="80"
                                             encoding="utf-8" unit="kG">
      <grid type="cartesian">
        <samples axis="x" n="351" bounds="-340 10" unit_length="cm">
          <samples axis="z" n="1611" bounds="-10 1600" unit_length="cm">
            <samples axis="y" n="16" bounds="0 -1.5" unit_length="cm"/>
          </samples>
        </samples>
      </grid>
      <grid type="cartesian">
        <samples axis="x" n="351" bounds="-340 10" 
                                  sense="reverse" unit_length="cm">
          <samples axis="z" n="1611" bounds="-10 1600"
                                     sense="reverse" unit_length="cm">
            <samples axis="y" n="16" bounds="0 -1.5" unit_length="cm"/>
          </samples>
        </samples>
      </grid>
      <grid type="cartesian">
        <samples axis="x" n="351" bounds="-340 10" unit_length="cm">
          <samples axis="z" n="1611" bounds="-10 1600" unit_length="cm">
            <samples axis="y" n="16" bounds="0 1.5" unit_length="cm"/>
          </samples>
        </samples>
      </grid>
    </mappedBfield>
  </region>

  <region name="solenoidBfield" comment="LASS spectrometer field map">
    <mappedBfield map="file://taggermap.dat" maxBfield="2.5"
                                             encoding="utf-8" unit="Tesla">
      <grid type="cylindrical">
        <samples axis="phi" n="1" bounds="0 360" unit_angle="deg"/>
          <samples axis="r" n="41" bounds="0 40" unit_length="in"/>
            <samples axis="z" n="251" bounds="30 280" unit_length="in"/>
          </samples>
        </samples>
      </grid>
    </mappedBfield>
    <swim method="RungeKutta"/>
  </region>

  <region name="quadrupoleCenter" comment="rapidly varying magnetic region"
          modifies="solenoidBfield">
    <swim method="RungeKutta" maxArcStep="0.1"/>
  </region>

1.6.5) Apply: associate a volume with a region
================================================

  Volumes are associated with regions at the time that the geometrical
  shape is defined.  This is useful in the case of a mappedBfield region
  because the origin and orientation of the field map must be specified in
  the coordinates of the newly defined volume.  The association is done
  using the the "apply" tag.  The attributes of the apply tag are:

	    region    : name of the region being applied
	    origin    : space-separated list of 3 coordinates "x y z"
			of the region origin in the local coordinates of
			the newly defined volume.
	    rot	      : space-separated list of 3 angles "a b c", with
			the X rotation of a angle done first,
			the Y rotation of b angle done second, and
			the Z rotation of c angle done last.
          unit_length : the units used to specify the coordinates [cm].
          unit_angle  : the units used to specify rotation angles [deg].


1.7) Identifiers
================

    Identifiers provide for a generalized identification scheme of
    positioned volumes in the detector. Identifier are specified as
    member elements attached to any position operator.

    Generally, an identifier is composed of a set of numbers such as

      /1/3/4/5/1/34

    The meaning of each field is conventional and reflects the local
    hierarchy of volumes.

    The identifier elements permit to freely specify which field(s)
    will be affected by the positioning operation. When single
    positioning is used, a single value of one or several fields will
    be affected by the operation. When a multiple positioning
    operation is considered, one or several fields will be iteratively
    affected. In this case, it is possible to follow the iteration by
    specifying a first value and a step used to compute iterated field
    values.

    Attributes :

    field      : a symbolic name characterizing the affected field. Legal names
                 should be conventionally specified. Currently six symbols
		 have been introduced :

		 row    (typically Y in rectangular arrays)
		 column (typically X in rectangular arrays)
                 layer  (typically R in barrels and Z in end-caps)
                 ring   (typically Z in barrels and R in end-caps)
                 sector (typically Phi in barrels)
                 plane  (typically Z in stacks)
		 module (generic)
		 cell   (generic)

    value        the exact value to be entered in single positioning or
                 the first value in multiple positioning.

    step         only used in multi-positioning.


1.8) Special models
====================

   Special elements may be defined to enable the maintenance of geometry
   information that is specific to a certain application.  This information
   should be kept together in the document with the generic geometric model
   specification in terms of solids, stacks and compositions.  This will
   facilitate the maintenance of a coordinated geometry model for all 
   applications. 


1.8.1) mcfast
=============

   The mcfast element specifies a mcfast model for a detector section.
   These entries are used to construct a valid mcfast geometry database
   from the geometry specification.  The content of an mcfast element is
   the same as a parameters element.  An mcfast element can also contain
   other mcfast elements.  The parameters defined at an outer level in the
   hierarchy become default values for elements contained within that level.
   An external parameters block can also be specified as an attribute to the
   mcfast element, whose contents serve as default values for the mcfast
   block.  The evaluation of parameters proceeds from outside in, and any
   parameter appearing more than once takes its value from the last occurrence.

   All values needed to fill out the mcfast template (see HDFast documentation)
   must be specified at least once.  This is up to the user to ensure, since
   the mcfast database specification is not xml-compliant and cannot be
   checked in validating this document.

   mcfast attributes:

   model	: a symbolic name from a list of valid mcfast detector types.
   template:	: the string "db/aaaa.db" where aaaa is the mcfast template
		  file corresponding to the model.  These two are required.
   parameters	: the name of a parameters element containing a subset of the
		  definitions required by the model template.  The rest of the
		  necessary parameters must appear as content (see below).

   mcfast content:

   | int
   | real
   | string
   | reference
   | int_array
   | real_array
   | string_vector
   | reference_vector
   mcfast	: one or more other mcfast blocks


2) Some examples showing typical usage of different elements
============================================================

   (note that these examples are generally extracted from more
   complete definitions. Therefore they are not expected to be
   complete and compilable, since some references may not be shown)


2.1) Using compositions and identifiers

<composition  name="MU_Stat_BML1">
   <posXYZ  volume="MU_BML1_RPC1"  X_Y_Z="  0        0  0">  <layer value=" 1" />  </posXYZ>
   <posXYZ  volume="MU_BML1_MDT1"  X_Y_Z="130.       0  0">  <layer value=" 2" />  </posXYZ>
   <posXYZ  volume="MU_BML1_SPA1"  X_Y_Z="336.98 -1700. 0">  <layer value=" 3" />  </posXYZ>
   <posXYZ  volume="MU_BML1_SPA1"  X_Y_Z="336.98     0  0">  <layer value="13" />  </posXYZ>
   <posXYZ  volume="MU_BML1_SPA1"  X_Y_Z="336.98  1700. 0">  <layer value="23" />  </posXYZ>
   <posXYZ  volume="MU_BML1_MDT2"  X_Y_Z="543.96     0  0">  <layer value=" 4" />  </posXYZ>
   <posXYZ  volume="MU_BML1_RPC1"  X_Y_Z="673.96     0  0">  <layer value=" 5" />  </posXYZ>
</composition>

<composition  name="MU_Barrel">
   <mposPhi volume="MU_Stat_BML1"  ncopy="8"  R_Z="6730.54  150.">  
      <ring   value="1" step="1" />
      <sector value="1" />
   </mposPhi>
   <mposPhi volume="MU_Stat_BML1"  ncopy="8"  R_Z="6730.54 1610.">
      <ring   value="1" step="1" />
      <sector value="2" />
   </mposPhi>
   <mposPhi volume="MU_Stat_BML1"  ncopy="8"  R_Z="6730.54 3070.">
      <ring   value="1" step="1" />
      <sector value="3" />
   </mposPhi>
   <mposPhi volume="MU_Stat_BML1"  ncopy="5"  R_Z="6730.54 4530." dPhi="45.">
      <ring   value="1" step="1" />
      <sector value="4" />
   </mposPhi>
   <posRPhiZ volume="MU_Stat_BML1" R_Phi_Z="6730.54 270. 4530.">
      <ring   value="1" step="1" />
      <sector value="7" />
   </posRPhiZ>
</composition>


2.2) Using parameters
    
<box  name="MU_BML1_MDT1" X_Y_Z="96.96 3580. 1440." material="Air"> 
  <real name="layers"              value="3"    unit="none"   comment="number of layers" />
  <real name="radiative_thickness" value="0.80" unit="cm"     comment="total radiative thickness" />
  <real_array name="dimensions"    values="30. 55.98 81.96" unit="cm" />
  <real_array name="z_positions"   values="30. 14.60 96.96" unit="cm" comment="z positions of layers" />
  <real_array name="x_positions"   values="15. 30. 15."     unit="cm" comment="x positions of first tube of each layer" />
</box>

<box  name="MU_BML1_RPC1" X_Y_Z="100.  3440. 1440." material="Honeycomb"> 
   <reference value="inner_RPC_1" /> 
</box>


2.3) Parameter complete syntax

<real   name="..." comment="..." value="..." unit="..."/>
<string name="..." comment="..." value="..." />

<reference name="..."  comment="..."  value="..." /> 
                                  (refers to a named parameter block)

<real_array    name="..." comment="..." values="... ... ..." unit="..."/>

<string_vector name="..." comment="...">
   <string_data value="..." />
   <string_data value="..." />
   <string_data value="..." />
</string_vector>

<reference_vector name="..." comment="...">
   <reference_data value="..." />
   <reference_data value="..." />
   <reference_data value="..." />
</reference_vector>

<parameters name="..." type="...">
   <real ..../>
   etc...
</parameters>


2.4) Using Axis compositions

<stackX name="MU_RPC1_LongStrips">
  <axisMPos volume="MU_RPC1_LongStrip" ncopy="96" gap0="2.6" shift="30.8"/>
</stackX>

<stackZ name="MU_RPC1_TranStrips">
  <axisMPos volume="MU_RPC1_TranStrip" ncopy="32" gap0="1.0" shift="30.0"/>
</stackZ>

<composition name="MU_RPC1_LongStripPanel">
  <posXYZ volume="MU_RPC1_StripPanel" />
  <posXYZ volume="MU_RPC1_LongStrips"  X_Y_Z="0 -1.48 0" />
</composition>

<composition name="MU_RPC1_TranStripPanel">
  <posXYZ volume="MU_RPC1_StripPanel" />
  <posXYZ volume="MU_RPC1_TranStrips"  X_Y_Z="0  1.48 0" />
</composition>

<stackY name="MU_RPC1_LowerActive">
  <axisPos volume="MU_RPC1_TranStripPanel" />
  <axisPos volume="MU_RPC1_Bakelite"       />
  <axisPos volume="MU_RPC1_GasGap"         />
  <axisPos volume="MU_RPC1_Bakelite"       />
  <axisPos volume="MU_RPC1_LongStripPanel" />
</stackY>

<stackY name="MU_RPC1_UpperActive">
  <axisPos volume="MU_RPC1_TranStripPanel" />
  <axisPos volume="MU_RPC1_Bakelite"       />
  <axisPos volume="MU_RPC1_GasGap"         />
  <axisPos volume="MU_RPC1_Bakelite"       />
  <axisPos volume="MU_RPC1_LongStripPanel" />
</stackY>


2.5) Using the polycone:

<pcon name="TEST_polycone" material="Air">
    <polyplane Rio_Z="0 10 0"  />
    <polyplane Rio_Z="2 20 10" />
    <polyplane Rio_Z="0 10 50" /> 
</pcon>


2.6) Using the polyhedron:

<pgon name="TEST_polyhedron" segments="8" material="Air">
    <polyplane Rio_Z="2 30 0"  />
    <polyplane Rio_Z="2 30 10" />
</pgon>

(end of the documentation) -->


<xs:simpleType name="angleUnit">
  <xs:restriction base="xs:token">
    <xs:enumeration value="deg"/>
    <xs:enumeration value="mrad"/>
  </xs:restriction>
</xs:simpleType>

<xs:simpleType name="lengthUnit">
  <xs:restriction base="xs:token">
    <xs:enumeration value="cm"/>
    <xs:enumeration value="mm"/>
    <xs:enumeration value="m"/>
    <xs:enumeration value="km"/>
    <xs:enumeration value="um"/>
    <xs:enumeration value="nm"/>
    <xs:enumeration value="in"/>
    <xs:enumeration value="ft"/>
    <xs:enumeration value="mil"/>
  </xs:restriction>
</xs:simpleType>

<xs:simpleType name="BfieldUnit">
  <xs:restriction base="xs:token">
    <xs:enumeration value="G"/>
    <xs:enumeration value="kG"/>
    <xs:enumeration value="Gs"/>
    <xs:enumeration value="kGs"/>
    <xs:enumeration value="T"/>
    <xs:enumeration value="Telsa"/>
  </xs:restriction>
</xs:simpleType>

<xs:simpleType name="anyUnit">
  <xs:restriction base="xs:token">
    <xs:enumeration value="m"/>
    <xs:enumeration value="cm"/>
    <xs:enumeration value="mm"/>
    <xs:enumeration value="deg"/>
    <xs:enumeration value="rad"/>
    <xs:enumeration value="mrad"/>
    <xs:enumeration value="MeV"/>
    <xs:enumeration value="GeV"/>
    <xs:enumeration value="g/cm^3"/>
    <xs:enumeration value="g/cm^2"/>
    <xs:enumeration value="MeV/g/cm^2"/>
    <xs:enumeration value="Tesla"/>
    <xs:enumeration value="kG"/>
    <xs:enumeration value="G"/>
    <xs:enumeration value="percent"/>
    <xs:enumeration value="none"/>
  </xs:restriction>
</xs:simpleType>

<xs:simpleType name="mapAxis">
  <xs:restriction base="xs:token">
    <xs:enumeration value="x"/>
    <xs:enumeration value="y"/>
    <xs:enumeration value="z"/>
    <xs:enumeration value="r"/>
    <xs:enumeration value="phi"/>
  </xs:restriction>
</xs:simpleType>

<xs:simpleType name="mapType">
  <xs:restriction base="xs:token">
    <xs:enumeration value="cartesian"/>
    <xs:enumeration value="cylindrical"/>
  </xs:restriction>
</xs:simpleType>

<xs:simpleType name="mapEncoding">
  <xs:restriction base="xs:token">
    <xs:enumeration value="utf-8"/>
  </xs:restriction>
</xs:simpleType>

<xs:simpleType name="originWhere">
  <xs:restriction base="xs:token">
    <xs:enumeration value="atStart"/>
    <xs:enumeration value="atCenter"/>
  </xs:restriction>
</xs:simpleType>

<xs:simpleType name="trueFalse">
  <xs:restriction base="xs:token">
    <xs:enumeration value="true"/>
    <xs:enumeration value="false"/>
  </xs:restriction>
</xs:simpleType>

<xs:simpleType name="forwardReverse">
  <xs:restriction base="xs:token">
    <xs:enumeration value="forward"/>
    <xs:enumeration value="reverse"/>
  </xs:restriction>
</xs:simpleType>

<xs:simpleType name="indexType">
  <xs:restriction base="xs:token">
    <xs:enumeration value="layer"/>
    <xs:enumeration value="ring"/>
    <xs:enumeration value="sector"/>
    <xs:enumeration value="row"/>
    <xs:enumeration value="column"/>
    <xs:enumeration value="module"/>
    <xs:enumeration value="cell"/>
    <xs:enumeration value="plane"/>
  </xs:restriction>
</xs:simpleType>

<xs:simpleType name="integerList">
  <xs:list itemType="xs:integer"/>
</xs:simpleType>

<xs:simpleType name="floatList">
  <xs:list itemType="xs:float"/>
</xs:simpleType>

<xs:simpleType name="positiveFloat">
  <xs:restriction base="xs:float">
    <xs:minExclusive value="0"/>
  </xs:restriction>
</xs:simpleType>

<xs:element name="HDDS">
  <xs:complexType>
    <xs:sequence>
      <xs:element ref="materials"/>
      <xs:choice minOccurs="1" maxOccurs="unbounded">
        <xs:element ref="section"/>
        <xs:element ref="regions"/>
      </xs:choice>
    </xs:sequence>

    <xs:attribute name="specification" use="required">
      <xs:simpleType>
        <xs:restriction base="xs:token">
          <xs:enumeration value="v1.0"/>
        </xs:restriction>
      </xs:simpleType>
    </xs:attribute>
  </xs:complexType>
</xs:element>

<xs:element name="addmaterial">
  <xs:complexType>
    <xs:choice>
      <xs:element ref="fractionmass"/>
      <xs:element ref="natoms"/>
    </xs:choice>

    <xs:attribute name="material" use="required" type="xs:IDREF"/>
  </xs:complexType>
</xs:element>

<xs:element name="axisMPos">
  <xs:complexType>
    <xs:choice minOccurs="0" maxOccurs="unbounded">
      <xs:element ref="layer"/>
      <xs:element ref="ring"/>
      <xs:element ref="sector"/>
      <xs:element ref="row"/>
      <xs:element ref="column"/>
      <xs:element ref="module"/>
      <xs:element ref="cell"/>
      <xs:element ref="plane"/>
      <xs:element ref="identifier"/>
    </xs:choice>

    <xs:attribute name="dX" default="0" type="xs:float"/>
    <xs:attribute name="dY" default="0" type="xs:float"/>
    <xs:attribute name="dZ" default="0" type="xs:float"/>
    <xs:attribute name="gap" default="0" type="xs:float"/>
    <xs:attribute name="gap0" default="0" type="xs:float"/>
    <xs:attribute name="ncopy" use="required" type="xs:positiveInteger"/>
    <xs:attribute name="rotation" default="0" type="xs:float"/>
    <xs:attribute name="shift" default="0" type="xs:float"/>
    <xs:attribute name="shift0" default="0" type="xs:float"/>
    <xs:attribute name="unit_angle" default="deg" type="angleUnit"/>
    <xs:attribute name="unit_length" default="cm" type="lengthUnit"/>
    <xs:attribute name="volume" use="required" type="xs:IDREF"/>
  </xs:complexType>
</xs:element>

<xs:element name="axisPos">
  <xs:complexType>
    <xs:choice minOccurs="0" maxOccurs="unbounded">
      <xs:element ref="layer"/>
      <xs:element ref="ring"/>
      <xs:element ref="sector"/>
      <xs:element ref="row"/>
      <xs:element ref="column"/>
      <xs:element ref="module"/>
      <xs:element ref="cell"/>
      <xs:element ref="plane"/>
      <xs:element ref="identifier"/>
    </xs:choice>

    <xs:attribute name="dX" default="0" type="xs:float"/>
    <xs:attribute name="dY" default="0" type="xs:float"/>
    <xs:attribute name="dZ" default="0" type="xs:float"/>
    <xs:attribute name="gap" default="0" type="xs:float"/>
    <xs:attribute name="rotation" default="0" type="xs:float"/>
    <xs:attribute name="shift" default="0" type="xs:float"/>
    <xs:attribute name="unit_angle" default="deg" type="angleUnit"/>
    <xs:attribute name="unit_length" default="cm" type="lengthUnit"/>
    <xs:attribute name="volume" use="required" type="xs:IDREF"/>
  </xs:complexType>
</xs:element>

<xs:element name="box">
  <xs:complexType>
    <xs:sequence>
      <xs:element ref="apply" minOccurs="0"/>
      <xs:group ref="parameter_group" minOccurs="0" maxOccurs="unbounded"/>
    </xs:sequence>

    <xs:attribute name="X_Y_Z" use="required">
      <xs:simpleType>
        <xs:restriction base="floatList">
          <xs:length value="3"/>
        </xs:restriction>
      </xs:simpleType>
    </xs:attribute>
    <xs:attribute name="comment" type="xs:string"/>
    <xs:attribute name="material" use="required" type="xs:IDREF"/>
    <xs:attribute name="name" use="required" type="xs:ID"/>
    <xs:attribute name="parameters" type="xs:IDREF"/>
    <xs:attribute name="sensitive" default="false" type="trueFalse"/>
    <xs:attribute name="unit_angle" default="deg" type="angleUnit"/>
    <xs:attribute name="unit_length" default="cm" type="lengthUnit"/>
  </xs:complexType>
</xs:element>

<xs:element name="cell">
  <xs:complexType>
    <xs:attribute name="field" default="cell">
      <xs:simpleType>
        <xs:restriction base="xs:token">
          <xs:enumeration value="cell"/>
        </xs:restriction>
      </xs:simpleType>
    </xs:attribute>
    <xs:attribute name="step" default="0" type="xs:integer"/>
    <xs:attribute name="value" default="0" type="xs:integer"/>
  </xs:complexType>
</xs:element>

<xs:element name="column">
  <xs:complexType>
    <xs:attribute name="field" default="column">
      <xs:simpleType>
        <xs:restriction base="xs:token">
          <xs:enumeration value="column"/>
        </xs:restriction>
      </xs:simpleType>
    </xs:attribute>
    <xs:attribute name="step" default="0" type="xs:integer"/>
    <xs:attribute name="value" default="0" type="xs:integer"/>
  </xs:complexType>
</xs:element>

<xs:element name="composite">
  <xs:complexType>
    <xs:sequence>
      <xs:element ref="addmaterial" minOccurs="1" maxOccurs="unbounded"/>
      <xs:group ref="parameter_group" minOccurs="0" maxOccurs="unbounded"/>
      <xs:element ref="optical_properties" minOccurs="0"/>
    </xs:sequence>

    <xs:attribute name="name" use="required" type="xs:ID"/>
  </xs:complexType>
</xs:element>

<xs:element name="composition">
  <xs:complexType>
    <xs:sequence>
      <xs:element ref="apply" minOccurs="0"/>
      <xs:choice minOccurs="1" maxOccurs="unbounded">
        <xs:element ref="posXYZ"/>
        <xs:element ref="posRPhiZ"/>
        <xs:element ref="mposR"/>
        <xs:element ref="mposPhi"/>
        <xs:element ref="mposX"/>
        <xs:element ref="mposY"/>
        <xs:element ref="mposZ"/>
      </xs:choice>
      <xs:group ref="parameter_group" minOccurs="0" maxOccurs="unbounded"/>
    </xs:sequence>

    <xs:attribute name="envelope" type="xs:IDREF"/>
    <xs:attribute name="name" use="required" type="xs:ID"/>
    <xs:attribute name="parameters" type="xs:IDREF"/>
  </xs:complexType>
</xs:element>

<xs:element name="cons">
  <xs:complexType>
    <xs:sequence>
      <xs:element ref="apply" minOccurs="0"/>
      <xs:group ref="parameter_group" minOccurs="0" maxOccurs="unbounded"/>
    </xs:sequence>

    <xs:attribute name="Rio1_Rio2_Z" use="required">
      <xs:simpleType>
        <xs:restriction base="floatList">
          <xs:length value="5"/>
        </xs:restriction>
      </xs:simpleType>
    </xs:attribute>
    <xs:attribute name="comment" type="xs:string"/>
    <xs:attribute name="material" use="required" type="xs:IDREF"/>
    <xs:attribute name="name" use="required" type="xs:ID"/>
    <xs:attribute name="parameters" type="xs:IDREF"/>
    <xs:attribute name="profile" default="0 360">
      <xs:simpleType>
        <xs:restriction base="floatList">
          <xs:length value="2"/>
        </xs:restriction>
      </xs:simpleType>
    </xs:attribute>
    <xs:attribute name="sensitive" default="false" type="trueFalse"/>
    <xs:attribute name="unit_angle" default="deg" type="angleUnit"/>
    <xs:attribute name="unit_length" default="cm" type="lengthUnit"/>
  </xs:complexType>
</xs:element>

<xs:element name="element">
  <xs:complexType>
    <xs:sequence>
      <xs:group ref="parameter_group" minOccurs="0" maxOccurs="unbounded"/>
      <xs:element ref="optical_properties" minOccurs="0"/>
    </xs:sequence>

    <xs:attribute name="a" use="required" type="xs:float"/>
    <xs:attribute name="name" use="required" type="xs:ID"/>
    <xs:attribute name="symbol" type="xs:token"/>
    <xs:attribute name="z" use="required" type="xs:float"/>
  </xs:complexType>
</xs:element>

<xs:element name="fractionmass">
  <xs:complexType>
    <xs:attribute name="fraction" use="required" type="xs:float"/>
  </xs:complexType>
</xs:element>

<xs:element name="identifier">
  <xs:complexType>
    <xs:attribute name="field" use="required" type="xs:token"/>
    <xs:attribute name="step" default="0" type="xs:integer"/>
    <xs:attribute name="value" default="0" type="xs:integer"/>
  </xs:complexType>
</xs:element>

<xs:element name="int">
  <xs:complexType>
    <xs:attribute name="comment" type="xs:string"/>
    <xs:attribute name="name" type="xs:token"/>
    <xs:attribute name="value" use="required" type="xs:integer"/>
  </xs:complexType>
</xs:element>

<xs:element name="int_array">
  <xs:complexType>
    <xs:attribute name="comment" type="xs:string"/>
    <xs:attribute name="name" type="xs:token"/>
    <xs:attribute name="values" use="required" type="integerList"/>
  </xs:complexType>
</xs:element>

<xs:element name="intersection">
  <xs:complexType>
    <xs:sequence>
      <xs:element ref="apply" minOccurs="0"/>
      <xs:choice minOccurs="1" maxOccurs="unbounded">
        <xs:element ref="posXYZ"/>
        <xs:element ref="posRPhiZ"/>
      </xs:choice>
      <xs:group ref="parameter_group" minOccurs="0" maxOccurs="unbounded"/>
    </xs:sequence>

    <xs:attribute name="name" use="required" type="xs:ID"/>
    <xs:attribute name="parameters" type="xs:IDREF"/>
  </xs:complexType>
</xs:element>

<xs:element name="layer">
  <xs:complexType>
    <xs:attribute name="field" default="layer">
      <xs:simpleType>
        <xs:restriction base="xs:token">
          <xs:enumeration value="layer"/>
        </xs:restriction>
      </xs:simpleType>
    </xs:attribute>
    <xs:attribute name="step" default="0" type="xs:integer"/>
    <xs:attribute name="value" default="0" type="xs:integer"/>
  </xs:complexType>
</xs:element>

<xs:element name="materials">
  <xs:complexType>
    <xs:choice minOccurs="1" maxOccurs="unbounded">
      <xs:element ref="element"/>
      <xs:element ref="composite"/>
    </xs:choice>

    <xs:attribute name="specification" use="required">
      <xs:simpleType>
        <xs:restriction base="xs:token">
          <xs:enumeration value="v1.0"/>
        </xs:restriction>
      </xs:simpleType>
    </xs:attribute>
    <xs:attribute name="author" use="required" type="xs:string"/>
    <xs:attribute name="date" use="required" type="xs:date"/>
    <xs:attribute name="version" use="required" type="xs:string"/>
  </xs:complexType>
</xs:element>

<xs:element name="samples">
  <xs:complexType>
    <xs:sequence>
      <xs:element ref="samples" minOccurs="0"/>
    </xs:sequence>

    <xs:attribute name="axis" use="required" type="mapAxis"/>
    <xs:attribute name="n" use="required" type="xs:int"/>
    <xs:attribute name="bounds" use="required">
      <xs:simpleType>
        <xs:restriction base="floatList">
          <xs:length value="2"/>
        </xs:restriction>
      </xs:simpleType>
    </xs:attribute>
    <xs:attribute name="sense" default="forward" type="forwardReverse"/>
    <xs:attribute name="unit_angle" default="deg" type="angleUnit"/>
    <xs:attribute name="unit_length" default="cm" type="lengthUnit"/>
  </xs:complexType>
</xs:element>

<xs:element name="grid">
  <xs:complexType>
    <xs:sequence>
      <xs:element ref="samples"/>
    </xs:sequence>

    <xs:attribute name="type" use="required" type="mapType"/>
  </xs:complexType>
</xs:element>

<xs:element name="mappedBfield">
  <xs:complexType>
    <xs:sequence>
      <xs:element ref="grid" maxOccurs="unbounded"/>
    </xs:sequence>

    <xs:attribute name="map" use="required" type="xs:anyURI"/>
    <xs:attribute name="encoding" use="required" type="mapEncoding"/>
    <xs:attribute name="maxBfield" use="required" type="xs:double"/>
    <xs:attribute name="unit" use="required" type="BfieldUnit"/>
  </xs:complexType>
</xs:element>

<xs:element name="uniformBfield">
  <xs:complexType>
    <xs:attribute name="Bx_By_Bz">
      <xs:simpleType>
        <xs:restriction base="floatList">
          <xs:length value="3"/>
        </xs:restriction>
      </xs:simpleType>
    </xs:attribute>
    <xs:attribute name="unit" use="required" type="BfieldUnit"/>
  </xs:complexType>
</xs:element>

<xs:element name="computedBfield">
  <xs:complexType>
    <xs:attribute name="function" use="required" type="xs:string"/>
    <xs:attribute name="maxBfield" use="required" type="xs:double"/>
    <xs:attribute name="unit" use="required" type="BfieldUnit"/>
  </xs:complexType>
</xs:element>

<xs:element name="noBfield">
</xs:element>

<xs:element name="swim">
  <xs:complexType>
    <xs:attribute name="method" use="required">
      <xs:simpleType>
        <xs:restriction base="xs:token">
          <xs:enumeration value="RungeKutta"/>
          <xs:enumeration value="helix"/>
        </xs:restriction>
      </xs:simpleType>
    </xs:attribute>
    <xs:attribute name="maxArcStep" default="1" type="xs:double"/>
    <xs:attribute name="unit_angle" default="deg" type="angleUnit"/>
  </xs:complexType>
</xs:element>

<xs:element name="region">
  <xs:complexType>
    <xs:sequence>
      <xs:choice minOccurs="0">
        <xs:element ref="noBfield"/>
        <xs:element ref="uniformBfield"/>
        <xs:element ref="mappedBfield"/>
        <xs:element ref="computedBfield"/>
      </xs:choice>
      <xs:element ref="swim" minOccurs="0"/>
    </xs:sequence>

    <xs:attribute name="name" use="required" type="xs:ID"/>
    <xs:attribute name="modifies" use="optional" type="xs:IDREF"/>
    <xs:attribute name="comment" use="optional" type="xs:string"/>
  </xs:complexType>
</xs:element>

<xs:element name="regions">
  <xs:complexType>
    <xs:sequence>
      <xs:element ref="region" maxOccurs="unbounded"/>
    </xs:sequence>

    <xs:attribute name="specification" use="required">
      <xs:simpleType>
        <xs:restriction base="xs:token">
          <xs:enumeration value="v1.0"/>
        </xs:restriction>
      </xs:simpleType>
    </xs:attribute>
    <xs:attribute name="author" use="required" type="xs:string"/>
    <xs:attribute name="date" use="required" type="xs:date"/>
    <xs:attribute name="version" use="required" type="xs:string"/>
  </xs:complexType>
</xs:element>

<xs:element name="apply">
  <xs:complexType>
    <xs:attribute name="region" use="required" type="xs:IDREF"/>
    <xs:attribute name="origin" default="0 0 0">
      <xs:simpleType>
        <xs:restriction base="floatList">
          <xs:length value="3"/>
        </xs:restriction>
      </xs:simpleType>
    </xs:attribute>
    <xs:attribute name="rot" default="0 0 0">
      <xs:simpleType>
        <xs:restriction base="floatList">
          <xs:length value="3"/>
        </xs:restriction>
      </xs:simpleType>
    </xs:attribute>
    <xs:attribute name="unit_angle" default="deg" type="angleUnit"/>
    <xs:attribute name="unit_length" default="cm" type="lengthUnit"/>
  </xs:complexType>
</xs:element>

<xs:element name="mcfast">
  <xs:complexType>
    <xs:sequence>
      <xs:group ref="parameter_group" minOccurs="0" maxOccurs="unbounded"/>
      <xs:element ref="mcfast" minOccurs="0" maxOccurs="unbounded"/>
    </xs:sequence>

    <xs:attribute name="model" use="required" type="xs:token"/>
    <xs:attribute name="parameters" type="xs:IDREF"/>
    <xs:attribute name="template" use="required" type="xs:anyURI"/>
  </xs:complexType>
</xs:element>

<xs:element name="module">
  <xs:complexType>
    <xs:attribute name="field" default="module">
      <xs:simpleType>
        <xs:restriction base="xs:token">
          <xs:enumeration value="module"/>
        </xs:restriction>
      </xs:simpleType>
    </xs:attribute>
    <xs:attribute name="step" default="0" type="xs:integer"/>
    <xs:attribute name="value" default="0" type="xs:integer"/>
  </xs:complexType>
</xs:element>

<xs:element name="mposPhi">
  <xs:complexType>
    <xs:choice minOccurs="0" maxOccurs="unbounded">
      <xs:element ref="layer"/>
      <xs:element ref="ring"/>
      <xs:element ref="sector"/>
      <xs:element ref="row"/>
      <xs:element ref="column"/>
      <xs:element ref="module"/>
      <xs:element ref="cell"/>
      <xs:element ref="plane"/>
      <xs:element ref="identifier"/>
    </xs:choice>

    <xs:attribute name="Phi0" default="0" type="xs:float"/>
    <xs:attribute name="R_Z" default="0 0">
      <xs:simpleType>
        <xs:restriction base="floatList">
          <xs:length value="2"/>
        </xs:restriction>
      </xs:simpleType>
    </xs:attribute>
    <xs:attribute name="S" default="0" type="xs:float"/>
    <xs:attribute name="dPhi" type="positiveFloat"/>
    <xs:attribute name="impliedRot" default="true" type="trueFalse"/>
    <xs:attribute name="ncopy" use="required" type="xs:positiveInteger"/>
    <xs:attribute name="rot" default="0 0 0">
      <xs:simpleType>
        <xs:restriction base="floatList">
          <xs:length value="3"/>
        </xs:restriction>
      </xs:simpleType>
    </xs:attribute>
    <xs:attribute name="unit_angle" default="deg" type="angleUnit"/>
    <xs:attribute name="unit_length" default="cm" type="lengthUnit"/>
    <xs:attribute name="volume" use="required" type="xs:IDREF"/>
  </xs:complexType>
</xs:element>

<xs:element name="mposR">
  <xs:complexType>
    <xs:choice minOccurs="0" maxOccurs="unbounded">
      <xs:element ref="layer"/>
      <xs:element ref="ring"/>
      <xs:element ref="sector"/>
      <xs:element ref="row"/>
      <xs:element ref="column"/>
      <xs:element ref="module"/>
      <xs:element ref="cell"/>
      <xs:element ref="plane"/>
      <xs:element ref="identifier"/>
    </xs:choice>

    <xs:attribute name="R0" default="0" type="xs:float"/>
    <xs:attribute name="S" default="0" type="xs:float"/>
    <xs:attribute name="Z_Phi" default="0 0">
      <xs:simpleType>
        <xs:restriction base="floatList">
          <xs:length value="2"/>
        </xs:restriction>
      </xs:simpleType>
    </xs:attribute>
    <xs:attribute name="dR" use="required" type="positiveFloat"/>
    <xs:attribute name="ncopy" use="required" type="xs:positiveInteger"/>
    <xs:attribute name="rot" default="0 0 0">
      <xs:simpleType>
        <xs:restriction base="floatList">
          <xs:length value="3"/>
        </xs:restriction>
      </xs:simpleType>
    </xs:attribute>
    <xs:attribute name="unit_angle" default="deg" type="angleUnit"/>
    <xs:attribute name="unit_length" default="cm" type="lengthUnit"/>
    <xs:attribute name="volume" use="required" type="xs:IDREF"/>
  </xs:complexType>
</xs:element>

<xs:element name="mposX">
  <xs:complexType>
    <xs:choice minOccurs="0" maxOccurs="unbounded">
      <xs:element ref="layer"/>
      <xs:element ref="ring"/>
      <xs:element ref="sector"/>
      <xs:element ref="row"/>
      <xs:element ref="column"/>
      <xs:element ref="module"/>
      <xs:element ref="cell"/>
      <xs:element ref="plane"/>
      <xs:element ref="identifier"/>
    </xs:choice>

    <xs:attribute name="S" default="0" type="xs:float"/>
    <xs:attribute name="X0" default="0" type="xs:float"/>
    <xs:attribute name="Y_Z" default="0 0">
      <xs:simpleType>
        <xs:restriction base="floatList">
          <xs:length value="2"/>
        </xs:restriction>
      </xs:simpleType>
    </xs:attribute>
    <xs:attribute name="dX" use="required" type="positiveFloat"/>
    <xs:attribute name="ncopy" use="required" type="xs:positiveInteger"/>
    <xs:attribute name="rot" default="0 0 0">
      <xs:simpleType>
        <xs:restriction base="floatList">
          <xs:length value="3"/>
        </xs:restriction>
      </xs:simpleType>
    </xs:attribute>
    <xs:attribute name="unit_angle" default="deg" type="angleUnit"/>
    <xs:attribute name="unit_length" default="cm" type="lengthUnit"/>
    <xs:attribute name="volume" use="required" type="xs:IDREF"/>
  </xs:complexType>
</xs:element>

<xs:element name="mposY">
  <xs:complexType>
    <xs:choice minOccurs="0" maxOccurs="unbounded">
      <xs:element ref="layer"/>
      <xs:element ref="ring"/>
      <xs:element ref="sector"/>
      <xs:element ref="row"/>
      <xs:element ref="column"/>
      <xs:element ref="module"/>
      <xs:element ref="cell"/>
      <xs:element ref="plane"/>
      <xs:element ref="identifier"/>
    </xs:choice>

    <xs:attribute name="S" default="0" type="xs:float"/>
    <xs:attribute name="Y0" default="0" type="xs:float"/>
    <xs:attribute name="Z_X" default="0 0">
      <xs:simpleType>
        <xs:restriction base="floatList">
          <xs:length value="2"/>
        </xs:restriction>
      </xs:simpleType>
    </xs:attribute>
    <xs:attribute name="dY" use="required" type="positiveFloat"/>
    <xs:attribute name="ncopy" use="required" type="xs:positiveInteger"/>
    <xs:attribute name="rot" default="0 0 0">
      <xs:simpleType>
        <xs:restriction base="floatList">
          <xs:length value="3"/>
        </xs:restriction>
      </xs:simpleType>
    </xs:attribute>
    <xs:attribute name="unit_angle" default="deg" type="angleUnit"/>
    <xs:attribute name="unit_length" default="cm" type="lengthUnit"/>
    <xs:attribute name="volume" use="required" type="xs:IDREF"/>
  </xs:complexType>
</xs:element>

<xs:element name="mposZ">
  <xs:complexType>
    <xs:choice minOccurs="0" maxOccurs="unbounded">
      <xs:element ref="layer"/>
      <xs:element ref="ring"/>
      <xs:element ref="sector"/>
      <xs:element ref="row"/>
      <xs:element ref="column"/>
      <xs:element ref="module"/>
      <xs:element ref="cell"/>
      <xs:element ref="plane"/>
      <xs:element ref="identifier"/>
    </xs:choice>

    <xs:attribute name="R_Phi" default="0 0" type="xs:string"/>
    <xs:attribute name="S" default="0" type="xs:float"/>
    <xs:attribute name="X_Y" default="0 0">
      <xs:simpleType>
        <xs:restriction base="floatList">
          <xs:length value="2"/>
        </xs:restriction>
      </xs:simpleType>
    </xs:attribute>
    <xs:attribute name="Z0" default="0" type="xs:float"/>
    <xs:attribute name="dZ" use="required" type="positiveFloat"/>
    <xs:attribute name="ncopy" use="required" type="xs:positiveInteger"/>
    <xs:attribute name="rot" default="0 0 0">
      <xs:simpleType>
        <xs:restriction base="floatList">
          <xs:length value="3"/>
        </xs:restriction>
      </xs:simpleType>
    </xs:attribute>
    <xs:attribute name="unit_angle" default="deg" type="angleUnit"/>
    <xs:attribute name="unit_length" default="cm" type="lengthUnit"/>
    <xs:attribute name="volume" use="required" type="xs:IDREF"/>
  </xs:complexType>
</xs:element>

<xs:element name="natoms">
  <xs:complexType>
    <xs:attribute name="n" use="required" type="xs:integer"/>
  </xs:complexType>
</xs:element>

<xs:element name="parameters">
  <xs:complexType>
    <xs:group ref="parameter_group" minOccurs="0" maxOccurs="unbounded"/>

    <xs:attribute name="name" use="required" type="xs:ID"/>
    <xs:attribute name="type" use="required" type="xs:token"/>
  </xs:complexType>
</xs:element>

<xs:element name="pcon">
  <xs:complexType>
    <xs:sequence>
      <xs:element ref="polyplane" minOccurs="2" maxOccurs="unbounded"/>
      <xs:element ref="apply" minOccurs="0"/>
      <xs:group ref="parameter_group" minOccurs="0" maxOccurs="unbounded"/>
    </xs:sequence>

    <xs:attribute name="comment" type="xs:string"/>
    <xs:attribute name="material" use="required" type="xs:IDREF"/>
    <xs:attribute name="name" use="required" type="xs:ID"/>
    <xs:attribute name="parameters" type="xs:IDREF"/>
    <xs:attribute name="profile" default="0 360">
      <xs:simpleType>
        <xs:restriction base="floatList">
          <xs:length value="2"/>
        </xs:restriction>
      </xs:simpleType>
    </xs:attribute>
    <xs:attribute name="sensitive" default="false">
      <xs:simpleType>
        <xs:restriction base="xs:token">
          <xs:enumeration value="true"/>
          <xs:enumeration value="false"/>
        </xs:restriction>
      </xs:simpleType>
    </xs:attribute>
    <xs:attribute name="unit_angle" default="deg" type="angleUnit"/>
    <xs:attribute name="unit_length" default="cm" type="lengthUnit"/>
  </xs:complexType>
</xs:element>

<xs:element name="pgon">
  <xs:complexType>
    <xs:sequence>
      <xs:element ref="polyplane" minOccurs="2" maxOccurs="unbounded"/>
      <xs:element ref="apply" minOccurs="0"/>
      <xs:group ref="parameter_group" minOccurs="0" maxOccurs="unbounded"/>
    </xs:sequence>

    <xs:attribute name="comment" type="xs:string"/>
    <xs:attribute name="material" use="required" type="xs:IDREF"/>
    <xs:attribute name="name" use="required" type="xs:ID"/>
    <xs:attribute name="parameters" type="xs:IDREF"/>
    <xs:attribute name="profile" default="0 360">
      <xs:simpleType>
        <xs:restriction base="floatList">
          <xs:length value="2"/>
        </xs:restriction>
      </xs:simpleType>
    </xs:attribute>
    <xs:attribute name="segments" use="required">
      <xs:simpleType>
        <xs:restriction base="xs:int">
          <xs:minInclusive value="1"/>
        </xs:restriction>
      </xs:simpleType>
    </xs:attribute>
    <xs:attribute name="sensitive" default="false">
      <xs:simpleType>
        <xs:restriction base="xs:token">
          <xs:enumeration value="true"/>
          <xs:enumeration value="false"/>
        </xs:restriction>
      </xs:simpleType>
    </xs:attribute>
    <xs:attribute name="unit_angle" default="deg" type="angleUnit"/>
    <xs:attribute name="unit_length" default="cm" type="lengthUnit"/>
  </xs:complexType>
</xs:element>

<xs:element name="sphere">
  <xs:complexType>
    <xs:sequence>
      <xs:element ref="apply" minOccurs="0"/>
      <xs:group ref="parameter_group" minOccurs="0" maxOccurs="unbounded"/>
    </xs:sequence>

    <xs:attribute name="comment" type="xs:string"/>
    <xs:attribute name="material" use="required" type="xs:IDREF"/>
    <xs:attribute name="name" use="required" type="xs:ID"/>
    <xs:attribute name="parameters" type="xs:IDREF"/>
    <xs:attribute name="Rio" use="required">
      <xs:simpleType>
        <xs:restriction base="floatList">
          <xs:length value="2"/>
        </xs:restriction>
      </xs:simpleType>
    </xs:attribute>
    <xs:attribute name="profile" default="0 360">
      <xs:simpleType>
        <xs:restriction base="floatList">
          <xs:length value="2"/>
        </xs:restriction>
      </xs:simpleType>
    </xs:attribute>
    <xs:attribute name="polar_bounds" default="0 180">
      <xs:simpleType>
        <xs:restriction base="floatList">
          <xs:length value="2"/>
        </xs:restriction>
      </xs:simpleType>
    </xs:attribute>
    <xs:attribute name="sensitive" default="false">
      <xs:simpleType>
        <xs:restriction base="xs:token">
          <xs:enumeration value="true"/>
          <xs:enumeration value="false"/>
        </xs:restriction>
      </xs:simpleType>
    </xs:attribute>
    <xs:attribute name="unit_angle" default="deg" type="angleUnit"/>
    <xs:attribute name="unit_length" default="cm" type="lengthUnit"/>
  </xs:complexType>
</xs:element>

<xs:element name="plane">
  <xs:complexType>
    <xs:attribute name="field" default="plane">
      <xs:simpleType>
        <xs:restriction base="xs:token">
          <xs:enumeration value="plane"/>
        </xs:restriction>
      </xs:simpleType>
    </xs:attribute>
    <xs:attribute name="step" default="0" type="xs:integer"/>
    <xs:attribute name="value" default="0" type="xs:integer"/>
  </xs:complexType>
</xs:element>

<xs:element name="polyplane">
  <xs:complexType>
    <xs:attribute name="Rio_Z" use="required">
      <xs:simpleType>
        <xs:restriction base="floatList">
          <xs:length value="3"/>
        </xs:restriction>
      </xs:simpleType>
    </xs:attribute>
  </xs:complexType>
</xs:element>

<xs:element name="posRPhiZ">
  <xs:complexType>
    <xs:choice minOccurs="0" maxOccurs="unbounded">
      <xs:element ref="layer"/>
      <xs:element ref="ring"/>
      <xs:element ref="sector"/>
      <xs:element ref="row"/>
      <xs:element ref="column"/>
      <xs:element ref="module"/>
      <xs:element ref="cell"/>
      <xs:element ref="plane"/>
      <xs:element ref="identifier"/>
    </xs:choice>

    <xs:attribute name="R_Phi_Z" default="0 0 0">
      <xs:simpleType>
        <xs:restriction base="floatList">
          <xs:length value="3"/>
        </xs:restriction>
      </xs:simpleType>
    </xs:attribute>
    <xs:attribute name="S" default="0" type="xs:float"/>
    <xs:attribute name="impliedRot" default="true" type="trueFalse"/>
    <xs:attribute name="rot" default="0 0 0" type="xs:string"/>
    <xs:attribute name="unit_angle" default="deg" type="angleUnit"/>
    <xs:attribute name="unit_length" default="cm" type="lengthUnit"/>
    <xs:attribute name="volume" use="required" type="xs:IDREF"/>
  </xs:complexType>
</xs:element>

<xs:element name="posXYZ">
  <xs:complexType>
    <xs:choice minOccurs="0" maxOccurs="unbounded">
      <xs:element ref="layer"/>
      <xs:element ref="ring"/>
      <xs:element ref="sector"/>
      <xs:element ref="row"/>
      <xs:element ref="column"/>
      <xs:element ref="module"/>
      <xs:element ref="cell"/>
      <xs:element ref="plane"/>
      <xs:element ref="identifier"/>
    </xs:choice>

    <xs:attribute name="S" default="0" type="xs:float"/>
    <xs:attribute name="X_Y_Z" default="0 0 0">
      <xs:simpleType>
        <xs:restriction base="floatList">
          <xs:length value="3"/>
        </xs:restriction>
      </xs:simpleType>
    </xs:attribute>
    <xs:attribute name="rot" default="0 0 0">
      <xs:simpleType>
        <xs:restriction base="floatList">
          <xs:length value="3"/>
        </xs:restriction>
      </xs:simpleType>
    </xs:attribute>
    <xs:attribute name="unit_angle" default="deg" type="angleUnit"/>
    <xs:attribute name="unit_length" default="cm" type="lengthUnit"/>
    <xs:attribute name="volume" use="required" type="xs:IDREF"/>
  </xs:complexType>
</xs:element>

<xs:element name="real">
  <xs:complexType>
    <xs:attribute name="comment" type="xs:string"/>
    <xs:attribute name="name" type="xs:token"/>
    <xs:attribute name="unit" use="required" type="anyUnit"/>
    <xs:attribute name="value" use="required" type="xs:float"/>
  </xs:complexType>
</xs:element>

<xs:element name="real_array">
  <xs:complexType>
    <xs:attribute name="comment" type="xs:string"/>
    <xs:attribute name="name" type="xs:token"/>
    <xs:attribute name="unit" use="required" type="anyUnit"/>
    <xs:attribute name="values" use="required" type="floatList"/>
  </xs:complexType>
</xs:element>

<xs:group name="parameter_group">
  <xs:choice>
    <xs:element ref="int"/>
    <xs:element ref="int_array"/>
    <xs:element ref="real"/>
    <xs:element ref="real_array"/>
    <xs:element ref="string"/>
    <xs:element ref="string_vector"/>
    <xs:element ref="reference"/>
    <xs:element ref="reference_vector"/>
  </xs:choice>
</xs:group>

<xs:element name="specify">
  <xs:complexType>
    <xs:attribute name="E" use="required">
      <xs:simpleType>
        <xs:restriction base="xs:float">
          <xs:minInclusive value="0"/>
        </xs:restriction>
      </xs:simpleType>
    </xs:attribute>
    <xs:attribute name="refindex" default="0">
      <xs:simpleType>
        <xs:restriction base="xs:float">
          <xs:minInclusive value="0"/>
        </xs:restriction>
      </xs:simpleType>
    </xs:attribute>
    <xs:attribute name="abslen" default="0">
      <xs:simpleType>
        <xs:restriction base="xs:float">
          <xs:minInclusive value="0"/>
        </xs:restriction>
      </xs:simpleType>
    </xs:attribute>
    <xs:attribute name="effic" default="0">
      <xs:simpleType>
        <xs:restriction base="xs:float">
          <xs:minInclusive value="0"/>
          <xs:maxInclusive value="1"/>
        </xs:restriction>
      </xs:simpleType>
    </xs:attribute>
    <xs:attribute name="reflect" default="0">
      <xs:simpleType>
        <xs:restriction base="xs:float">
          <xs:minInclusive value="0"/>
          <xs:maxInclusive value="1"/>
        </xs:restriction>
      </xs:simpleType>
    </xs:attribute>
    <xs:attribute name="smooth" default="0">
      <xs:simpleType>
        <xs:restriction base="xs:float">
          <xs:minInclusive value="0"/>
          <xs:maxInclusive value="1"/>
        </xs:restriction>
      </xs:simpleType>
    </xs:attribute>
  </xs:complexType>
</xs:element>

<xs:element name="optical_properties">
  <xs:complexType>
    <xs:sequence>
      <xs:element ref="specify" minOccurs="2" maxOccurs="unbounded"/>
    </xs:sequence>

    <xs:attribute name="comment" type="xs:string"/>
  </xs:complexType>
</xs:element>

<xs:element name="reference">
  <xs:complexType>
    <xs:attribute name="comment" type="xs:string"/>
    <xs:attribute name="name" type="xs:token"/>
    <xs:attribute name="value" use="required" type="xs:IDREF"/>
  </xs:complexType>
</xs:element>

<xs:element name="reference_data">
  <xs:complexType>
    <xs:attribute name="comment" type="xs:string"/>
    <xs:attribute name="value" use="required" type="xs:IDREF"/>
  </xs:complexType>
</xs:element>

<xs:element name="reference_vector">
  <xs:complexType>
    <xs:sequence>
      <xs:element ref="reference_data" minOccurs="1" maxOccurs="unbounded"/>
    </xs:sequence>

    <xs:attribute name="comment" type="xs:string"/>
    <xs:attribute name="name" type="xs:token"/>
  </xs:complexType>
</xs:element>

<xs:element name="ring">
  <xs:complexType>
    <xs:attribute name="field" default="ring">
      <xs:simpleType>
        <xs:restriction base="xs:token">
          <xs:enumeration value="ring"/>
        </xs:restriction>
      </xs:simpleType>
    </xs:attribute>
    <xs:attribute name="step" default="0" type="xs:integer"/>
    <xs:attribute name="value" default="0" type="xs:integer"/>
  </xs:complexType>
</xs:element>

<xs:element name="row">
  <xs:complexType>
    <xs:attribute name="field" default="row">
      <xs:simpleType>
        <xs:restriction base="xs:token">
          <xs:enumeration value="row"/>
        </xs:restriction>
      </xs:simpleType>
    </xs:attribute>
    <xs:attribute name="step" default="0" type="xs:integer"/>
    <xs:attribute name="value" default="0" type="xs:integer"/>
  </xs:complexType>
</xs:element>

<xs:element name="section">
  <xs:complexType>
    <xs:choice minOccurs="1" maxOccurs="unbounded">
      <xs:element ref="box"/>
      <xs:element ref="trd"/>
      <xs:element ref="tubs"/>
      <xs:element ref="eltu"/>
      <xs:element ref="cons"/>
      <xs:element ref="pcon"/>
      <xs:element ref="pgon"/>
      <xs:element ref="sphere"/>
      <xs:element ref="union"/>
      <xs:element ref="intersection"/>
      <xs:element ref="subtraction"/>
      <xs:element ref="composition"/>
      <xs:element ref="stackX"/>
      <xs:element ref="stackY"/>
      <xs:element ref="stackZ"/>
      <xs:element ref="parameters"/>
      <xs:element ref="mcfast"/>
    </xs:choice>

    <xs:attribute name="specification" use="required">
      <xs:simpleType>
        <xs:restriction base="xs:token">
          <xs:enumeration value="v1.0"/>
        </xs:restriction>
      </xs:simpleType>
    </xs:attribute>
    <xs:attribute name="author" use="required" type="xs:string"/>
    <xs:attribute name="date" use="required" type="xs:date"/>
    <xs:attribute name="name" use="required" type="xs:token"/>
    <xs:attribute name="top_volume" use="required" type="xs:IDREF"/>
    <xs:attribute name="version" use="required" type="xs:string"/>
  </xs:complexType>
</xs:element>

<xs:element name="sector">
  <xs:complexType>
    <xs:attribute name="field" default="sector">
      <xs:simpleType>
        <xs:restriction base="xs:token">
          <xs:enumeration value="sector"/>
        </xs:restriction>
      </xs:simpleType>
    </xs:attribute>
    <xs:attribute name="step" default="0" type="xs:integer"/>
    <xs:attribute name="value" default="0" type="xs:integer"/>
  </xs:complexType>
</xs:element>

<xs:element name="stackX">
  <xs:complexType>
    <xs:sequence>
      <xs:element ref="apply" minOccurs="0"/>
      <xs:choice minOccurs="1" maxOccurs="unbounded">
        <xs:element ref="axisPos"/>
        <xs:element ref="axisMPos"/>
      </xs:choice>
      <xs:group ref="parameter_group" minOccurs="0" maxOccurs="unbounded"/>
    </xs:sequence>

    <xs:attribute name="name" use="required" type="xs:ID"/>
    <xs:attribute name="origin" default="atStart" type="originWhere"/>
    <xs:attribute name="parameters" type="xs:IDREF"/>
  </xs:complexType>
</xs:element>

<xs:element name="stackY">
  <xs:complexType>
    <xs:sequence>
      <xs:element ref="apply" minOccurs="0"/>
      <xs:choice minOccurs="1" maxOccurs="unbounded">
        <xs:element ref="axisPos"/>
        <xs:element ref="axisMPos"/>
      </xs:choice>
      <xs:group ref="parameter_group" minOccurs="0" maxOccurs="unbounded"/>
    </xs:sequence>

    <xs:attribute name="name" use="required" type="xs:ID"/>
    <xs:attribute name="origin" default="atStart" type="originWhere"/>
    <xs:attribute name="parameters" type="xs:IDREF"/>
  </xs:complexType>
</xs:element>

<xs:element name="stackZ">
  <xs:complexType>
    <xs:sequence>
      <xs:element ref="apply" minOccurs="0"/>
      <xs:choice minOccurs="1" maxOccurs="unbounded">
        <xs:element ref="axisPos"/>
        <xs:element ref="axisMPos"/>
      </xs:choice>
      <xs:group ref="parameter_group" minOccurs="0" maxOccurs="unbounded"/>
    </xs:sequence>

    <xs:attribute name="name" use="required" type="xs:ID"/>
    <xs:attribute name="origin" default="atStart" type="originWhere"/>
    <xs:attribute name="parameters" type="xs:IDREF"/>
  </xs:complexType>
</xs:element>

<xs:element name="string">
  <xs:complexType>
    <xs:attribute name="comment" type="xs:string"/>
    <xs:attribute name="name" type="xs:token"/>
    <xs:attribute name="value" use="required" type="xs:string"/>
  </xs:complexType>
</xs:element>

<xs:element name="string_data">
  <xs:complexType>
    <xs:attribute name="comment" type="xs:string"/>
    <xs:attribute name="value" use="required" type="xs:string"/>
  </xs:complexType>
</xs:element>

<xs:element name="string_vector">
  <xs:complexType>
    <xs:sequence>
      <xs:element ref="string_data" minOccurs="1" maxOccurs="unbounded"/>
    </xs:sequence>

    <xs:attribute name="comment" type="xs:string"/>
    <xs:attribute name="name" type="xs:token"/>
  </xs:complexType>
</xs:element>

<xs:element name="subtraction">
  <xs:complexType>
    <xs:sequence>
      <xs:element ref="apply" minOccurs="0"/>
      <xs:choice minOccurs="1" maxOccurs="unbounded">
        <xs:element ref="posXYZ"/>
        <xs:element ref="posRPhiZ"/>
      </xs:choice>
      <xs:group ref="parameter_group" minOccurs="0" maxOccurs="unbounded"/>
    </xs:sequence>

    <xs:attribute name="name" use="required" type="xs:ID"/>
    <xs:attribute name="parameters" type="xs:IDREF"/>
  </xs:complexType>
</xs:element>

<xs:element name="trd">
  <xs:complexType>
    <xs:sequence>
      <xs:element ref="apply" minOccurs="0"/>
      <xs:group ref="parameter_group" minOccurs="0" maxOccurs="unbounded"/>
    </xs:sequence>

    <xs:attribute name="Xmp_Ymp_Z" use="required">
      <xs:simpleType>
        <xs:restriction base="floatList">
          <xs:length value="5"/>
        </xs:restriction>
      </xs:simpleType>
    </xs:attribute>
    <xs:attribute name="comment" type="xs:string"/>
    <xs:attribute name="inclination" default="0 0">
      <xs:simpleType>
        <xs:restriction base="floatList">
          <xs:length value="2"/>
        </xs:restriction>
      </xs:simpleType>
    </xs:attribute>
    <xs:attribute name="material" use="required" type="xs:IDREF"/>
    <xs:attribute name="name" use="required" type="xs:ID"/>
    <xs:attribute name="parameters" type="xs:IDREF"/>
    <xs:attribute name="sensitive" default="false" type="trueFalse"/>
    <xs:attribute name="unit_angle" default="deg" type="angleUnit"/>
    <xs:attribute name="unit_length" default="cm" type="lengthUnit"/>
  </xs:complexType>
</xs:element>

<xs:element name="tubs">
  <xs:complexType>
    <xs:sequence>
      <xs:element ref="apply" minOccurs="0"/>
      <xs:group ref="parameter_group" minOccurs="0" maxOccurs="unbounded"/>
    </xs:sequence>

    <xs:attribute name="Rio_Z" use="required">
      <xs:simpleType>
        <xs:restriction base="floatList">
          <xs:length value="3"/>
        </xs:restriction>
      </xs:simpleType>
    </xs:attribute>
    <xs:attribute name="comment" type="xs:string"/>
    <xs:attribute name="material" use="required" type="xs:IDREF"/>
    <xs:attribute name="name" use="required" type="xs:ID"/>
    <xs:attribute name="parameters" type="xs:IDREF"/>
    <xs:attribute name="profile" default="0 360">
      <xs:simpleType>
        <xs:restriction base="floatList">
          <xs:length value="2"/>
        </xs:restriction>
      </xs:simpleType>
    </xs:attribute>
    <xs:attribute name="sensitive" default="false" type="trueFalse"/>
    <xs:attribute name="unit_angle" default="deg" type="angleUnit"/>
    <xs:attribute name="unit_length" default="cm" type="lengthUnit"/>
  </xs:complexType>
</xs:element>

<xs:element name="eltu">
  <xs:complexType>
    <xs:sequence>
      <xs:element ref="apply" minOccurs="0"/>
      <xs:group ref="parameter_group" minOccurs="0" maxOccurs="unbounded"/>
    </xs:sequence>

    <xs:attribute name="Rxy_Z" use="required">
      <xs:simpleType>
        <xs:restriction base="floatList">
          <xs:length value="3"/>
        </xs:restriction>
      </xs:simpleType>
    </xs:attribute>
    <xs:attribute name="comment" type="xs:string"/>
    <xs:attribute name="material" use="required" type="xs:IDREF"/>
    <xs:attribute name="name" use="required" type="xs:ID"/>
    <xs:attribute name="parameters" type="xs:IDREF"/>
    <xs:attribute name="sensitive" default="false" type="trueFalse"/>
    <xs:attribute name="unit_angle" default="deg" type="angleUnit"/>
    <xs:attribute name="unit_length" default="cm" type="lengthUnit"/>
  </xs:complexType>
</xs:element>


<xs:element name="union">
  <xs:complexType>
    <xs:sequence>
      <xs:element ref="apply" minOccurs="0"/>
      <xs:choice minOccurs="1" maxOccurs="unbounded">
        <xs:element ref="posXYZ"/>
        <xs:element ref="posRPhiZ"/>
      </xs:choice>
      <xs:group ref="parameter_group" minOccurs="0" maxOccurs="unbounded"/>
    </xs:sequence>

    <xs:attribute name="name" use="required" type="xs:ID"/>
    <xs:attribute name="parameters" type="xs:IDREF"/>
  </xs:complexType>
</xs:element>

</xs:schema>