#meta full request: /GEOMETRY/CylindricalGEM_HDDS.xml:90008:mc_vertex:2021-09-07_14-36-20
#meta variation: mc_vertex
#meta created: 2021-09-07 14:36:20
#meta run range: 90008 - 90008
#meta author: ijaegle

#remove G10

#& xml
<?xml version="1.0" encoding="UTF-8"?>
<!--DOCTYPE HDDS>

  Hall D Geometry Data Base: Forward MWPC for Charged Pion Polarizability
  **************************************************

     version 1.0: Initial version	-DL
	 
By default this detector is not enabled in the standard Hall-D geometry in
HDDS. Here is how to enable it and the rest of the geometry changes needed
for the CPP experiment:

in main_HDDS.xml
=================
1. uncomment the line for the ForwardMWPC in the "forwardPackage" compisition

2. comment out the line for the ComptonEMcal in the "forwardPackage" compisition
   (since it occupies the same space)

3. 


 
<HDDS specification="v1.0" xmlns="http://www.gluex.org/hdds">
-->

<section name        = "CylindricalGEM"
         version     = "1.1"
         date        = "2020-12-07"
         author      = "I. Jaegle"
         top_volume  = "CGEMMother"
         specification = "v1.0">

<!-- Origin of CCGEM is center of target -->

<!-- 
  3 gaps w/ ArCO2:70:30 totaling 1cm of space in R
-->

 <composition name="CylindricalGEM" >
   
   <posXYZ volume="CGEMMother" X_Y_Z="0.0 0.0 0.0"/>
   
 </composition>

 <composition name="CGEMMother" envelope="CGEM">

   <posXYZ volume="Su3a" X_Y_Z="0.0 0.0 0.0" />
   <posXYZ volume="EpG3" X_Y_Z="0.0 0.0 0.0" />
   <posXYZ volume="Cu3b" X_Y_Z="0.0 0.0 0.0" />
   <posXYZ volume="Dri3" X_Y_Z="0.0 0.0 0.0">
     <layer value="3"/>
   </posXYZ>
   <posXYZ volume="Cu3a" X_Y_Z="0.0 0.0 0.0" />
   <posXYZ volume="Kap3" X_Y_Z="0.0 0.0 0.0" />
   <posXYZ volume="DLC3" X_Y_Z="0.0 0.0 0.0" />
   <posXYZ volume="Pcb3" X_Y_Z="0.0 0.0 0.0" />
   <posXYZ volume="Su3b" X_Y_Z="0.0 0.0 0.0" />

   <posXYZ volume="Su2a" X_Y_Z="0.0 0.0 0.0" />
   <posXYZ volume="EpG2" X_Y_Z="0.0 0.0 0.0" />
   <posXYZ volume="Cu2b" X_Y_Z="0.0 0.0 0.0" />
   <posXYZ volume="Dri2" X_Y_Z="0.0 0.0 0.0">
     <layer value="2"/>
   </posXYZ>
   <posXYZ volume="Cu2a" X_Y_Z="0.0 0.0 0.0" />
   <posXYZ volume="Kap2" X_Y_Z="0.0 0.0 0.0" />
   <posXYZ volume="DLC2" X_Y_Z="0.0 0.0 0.0" />
   <posXYZ volume="Pcb2" X_Y_Z="0.0 0.0 0.0" />
   <posXYZ volume="Su2b" X_Y_Z="0.0 0.0 0.0" />

   <posXYZ volume="Su1a" X_Y_Z="0.0 0.0 0.0" />
   <posXYZ volume="EpG1" X_Y_Z="0.0 0.0 0.0" />
   <posXYZ volume="Cu1b" X_Y_Z="0.0 0.0 0.0" />
   <posXYZ volume="Dri1" X_Y_Z="0.0 0.0 0.0">
     <layer value="1"/>
   </posXYZ>
   <posXYZ volume="Cu1a" X_Y_Z="0.0 0.0 0.0" />
   <posXYZ volume="Kap1" X_Y_Z="0.0 0.0 0.0" />
   <posXYZ volume="DLC1" X_Y_Z="0.0 0.0 0.0" />
   <posXYZ volume="Pcb1" X_Y_Z="0.0 0.0 0.0" />
   <posXYZ volume="Su1b" X_Y_Z="0.0 0.0 0.0" />

 </composition>

 <tubs name="CGEM" Rio_Z="4.5000 6.6000 35.00"  material="Air" comment="CGEM mother air volume" />


 <tubs name="EpG3" Rio_Z="6.4000 6.5000 35.00"  material="E-glass" comment="Epoxy-Glass module 3 layer 7" />
 <tubs name="Cu3b" Rio_Z="6.3965 6.4000 35.00"  material="Copper" comment="Copper module 3 layer 6" />
 <tubs name="Dri3" Rio_Z="6.1106 6.3965 35.00"  material="FDchamberGas" sensitive="true" comment="Drift gap module 3 layer 5" />
 <tubs name="Cu3a" Rio_Z="6.1101 6.1106 35.00"  material="Copper" comment="Copper module 3 layer 4" />
 <tubs name="Kap3" Rio_Z="6.1001 6.1101 35.00"  material="Kapton" comment="Kapton module 3 layer 3" />
 <tubs name="DLC3" Rio_Z="6.1000 6.1001 35.00"  material="Carbon" comment="Diamond-Like Carbon module 3 layer 2" />
 <tubs name="Pcb3" Rio_Z="6.0000 6.1000 35.00"  material="FR-4" comment="Pcb module 3 layer 1" />



 <tubs name="EpG2" Rio_Z="5.7000 5.8000 35.00"  material="E-glass" comment="Epoxy-Glass module 2 layer 7" />
 <tubs name="Cu2b" Rio_Z="5.6965 5.7000 35.00"  material="Copper" comment="Copper module 2 layer 6" />
 <tubs name="Dri2" Rio_Z="5.4106 5.6965 35.00"  material="FDchamberGas" sensitive="true" comment="Drift gap module 2 layer 5" />
 <tubs name="Cu2a" Rio_Z="5.4101 5.4106 35.00"  material="Copper" comment="Copper module 2 layer 4" />
 <tubs name="Kap2" Rio_Z="5.4001 5.4101 35.00"  material="Kapton" comment="Kapton module 2 layer 3" />
 <tubs name="DLC2" Rio_Z="5.4000 5.4001 35.00"  material="Carbon" comment="Diamond-Like Carbon module 2 layer 2" />
 <tubs name="Pcb2" Rio_Z="5.3000 5.4000 35.00"  material="FR-4" comment="Pcb module 2 layer 1" />



 <tubs name="EpG1" Rio_Z="5.0000 5.1000 35.00"  material="E-glass" comment="Epoxy-Glass module 1 layer 7" />
 <tubs name="Cu1b" Rio_Z="4.9965 5.0000 35.00"  material="Copper" comment="Copper module 1 layer 6" />
 <tubs name="Dri1" Rio_Z="4.7106 4.9965 35.00"  material="FDchamberGas" sensitive="true" comment="Drift gap module 1 layer 5" />
 <tubs name="Cu1a" Rio_Z="4.7101 4.7106 35.00"  material="Copper" comment="Copper module 1 layer 4" />
 <tubs name="Kap1" Rio_Z="4.7001 4.7101 35.00"  material="Kapton" comment="Kapton module 1 layer 3" />
 <tubs name="DLC1" Rio_Z="4.7000 4.7001 35.00"  material="Carbon" comment="Diamond-Like Carbon module 1 layer 2" />
 <tubs name="Pcb1" Rio_Z="4.6000 4.7000 35.00"  material="FR-4" comment="Pcb module 1 layer 1" />


</section>