Difference between revisions of "Collect Beam Data for Detector Checkout"

From Hall D Ops Wiki
Jump to: navigation, search
(Created page with "__TOC__ ==Main Page== ==Tune Electron Beam== ==Tune Photon Beam== ==One Week Pause in Running== ==Collect Beam Data for Detector C...")
 
(Collect Beam Data for Detector Checkout)
Line 5: Line 5:
 
==[[One Week Pause in Running]]==
 
==[[One Week Pause in Running]]==
 
==Collect Beam Data for Detector Checkout==
 
==Collect Beam Data for Detector Checkout==
 +
# Goal: Collect 5 days of beam data.
 +
# Responsibility: HallD
 +
# Conditions:
 +
#* Tagger hall equipment in place and operating.
 +
#* Beam 50nA CW
 +
#* Radiator is 10<sup>-4</sup>.
 +
#* Collimator hole is 3.5mm.
 +
#* Solenoid on at 1200A
 +
#* GlueX detectors are on.
 +
#* Thin commissioning target at nominal position.
 +
# Activities
 +
#* Verify photon beam position and background levels.
 +
#* Take data with the regular trigger for five days
 +
 
==[[Optimize Detector Settings]]==
 
==[[Optimize Detector Settings]]==
 
==[[Drift Chamber Alignment]]==
 
==[[Drift Chamber Alignment]]==
 
==[[Collect More Regular Data]]==
 
==[[Collect More Regular Data]]==

Revision as of 10:47, 2 July 2014

Main Page

Tune Electron Beam

Tune Photon Beam

One Week Pause in Running

Collect Beam Data for Detector Checkout

  1. Goal: Collect 5 days of beam data.
  2. Responsibility: HallD
  3. Conditions:
    • Tagger hall equipment in place and operating.
    • Beam 50nA CW
    • Radiator is 10-4.
    • Collimator hole is 3.5mm.
    • Solenoid on at 1200A
    • GlueX detectors are on.
    • Thin commissioning target at nominal position.
  4. Activities
    • Verify photon beam position and background levels.
    • Take data with the regular trigger for five days

Optimize Detector Settings

Drift Chamber Alignment

Collect More Regular Data