Difference between revisions of "Drift Chamber Alignment"

From Hall D Ops Wiki
Jump to: navigation, search
(Created page with "__TOC__ ==Main Page== ==Tune Electron Beam== ==Tune Photon Beam== ==One Week Pause in Running== ==[[Collect Beam Data for Detector...")
 
(Drift Chamber Alignment)
Line 7: Line 7:
 
==[[Optimize Detector Settings]]==
 
==[[Optimize Detector Settings]]==
 
==Drift Chamber Alignment==
 
==Drift Chamber Alignment==
 +
# Goal: Collect data with no or low field.
 +
# Responsibility: HallD
 +
# Conditions:
 +
#* Tagger hall equipment in place and operating.
 +
#* Beam 50nA CW
 +
#* Radiator is 10<sup>-4</sup>.
 +
#* Collimator hole is 3.5mm.
 +
#* Solenoid 0-300A depending on backgrounds.
 +
#* GlueX detectors are on.
 +
#* Thin commissioning target at various positions.
 +
# Activities
 +
#* If time permits, collect data with target in several positions.
 +
 
==[[Collect More Regular Data]]==
 
==[[Collect More Regular Data]]==

Revision as of 10:48, 2 July 2014

Main Page

Tune Electron Beam

Tune Photon Beam

One Week Pause in Running

Collect Beam Data for Detector Checkout

Optimize Detector Settings

Drift Chamber Alignment

  1. Goal: Collect data with no or low field.
  2. Responsibility: HallD
  3. Conditions:
    • Tagger hall equipment in place and operating.
    • Beam 50nA CW
    • Radiator is 10-4.
    • Collimator hole is 3.5mm.
    • Solenoid 0-300A depending on backgrounds.
    • GlueX detectors are on.
    • Thin commissioning target at various positions.
  4. Activities
    • If time permits, collect data with target in several positions.

Collect More Regular Data