Level-1 Trigger Shift
From Hall D Ops Wiki
Contents
Configuration for Production Runs
Production data is taken with the following configuration, which has to be selected at the RCM Run Config GUI:
| RUN: | EXPERT |
| SETUP: | hd_all.tsg |
| CONFIG: | FCAL_BCAL_PS_m9.conf (main production mode) or |
| FCAL_BCAL_PS_m10.conf (debug mode, readout raw samples for FADCs 250 and 125) |
Trigger Types
Currently, there are following main (GTP) triggers used in data production:
| Trigger Type | Trigger Bit (starting from 1) |
|---|---|
| FCAL + 0.5 BCAL > 0.5 GeV | 1 |
| BCAL > 1.1 GeV | 3 |
| PS | 4 |
| Slot | Address |
|---|---|
| 3 | 0x180000 |
| 4 | 0x200000 |
| 5 | 0x280000 |
| 6 | 0x300000 |
| 7 | 0x380000 |
| 8 | 0x400000 |
| 9 | 0x480000 |
| 10 | 0x500000 |
| 13 | 0x680000 |
| 14 | 0x700000 |
| 15 | 0x780000 |
| 16 | 0x800000 |
| 17 | 0x880000 |
| 18 | 0x900000 |
| 19 | 0x980000 |
| 20 | 0xA00000 |
| 21 | 0xA80000 |
Main Triggers used in data production
TS Front Pannel Triggers
Trigger Monitor
Trigger Rates for Production Runs
| Name | Extension | Date of qualification |
|---|---|---|
| Alexander Somov | 269-5553 | June 20, 2015 |
