Difference between revisions of "Solenoid expert pxi"

From Hall D Ops Wiki
Jump to: navigation, search
m (How-To)
(Basic Information)
Line 1: Line 1:
 
== Basic Information ==
 
== Basic Information ==
 +
 +
A PXI system is built and configured to monitor the vital signals of the Hall-D super-conducting magnet to ensure its safe operation, particularly to detector the turn-to-turn short faults. Currently, the system contains 4 ADC modules which can sample up to 32 channels simultaneously at a maximum rate of 250 kHz. A LabVIEW RT program is automatically loaded and executed when the system is booted as a stand alone turn-key system. Through its Ethernet connection, the system hosts an EPICS server so that the measurements can be easily accessed and archived remotely. It also serves as an Ethernet device to the magnet control system based on PLC to provides various readings including current, field and voltages.
 +
 +
A technical note is available on GlueX DocDB - [http://argus.phys.uregina.ca/cgi-bin/private/DocDB/ShowDocument?docid=2516 doc-2016]
 +
 +
Information for the period of solenoid commissioning can be found [https://halldweb1.jlab.org/wiki/index.php/Fast_Monitoring_System_-_PXI here]
 +
 +
=== Configuration ===
 +
 +
# hostname: '''halld-pxi.jlab.org'''
 +
# ip address: '''129.57.26.123'''
  
 
== How-To ==
 
== How-To ==

Revision as of 18:20, 3 August 2014

Basic Information

A PXI system is built and configured to monitor the vital signals of the Hall-D super-conducting magnet to ensure its safe operation, particularly to detector the turn-to-turn short faults. Currently, the system contains 4 ADC modules which can sample up to 32 channels simultaneously at a maximum rate of 250 kHz. A LabVIEW RT program is automatically loaded and executed when the system is booted as a stand alone turn-key system. Through its Ethernet connection, the system hosts an EPICS server so that the measurements can be easily accessed and archived remotely. It also serves as an Ethernet device to the magnet control system based on PLC to provides various readings including current, field and voltages.

A technical note is available on GlueX DocDB - doc-2016

Information for the period of solenoid commissioning can be found here

Configuration

  1. hostname: halld-pxi.jlab.org
  2. ip address: 129.57.26.123

How-To

Check PXI Status

Reboot PXI Chassis

High Speed DAQ

Analyze High Speed Data