File info

/gluondaqfs/hdops/CDAQ/daq_dev_v0.31/daq/config/hd_all/CCAL_FCAL_PS_m9.conf DB id=23656 Raw

Content:

#! Run type::  PHYSICS_8    Config::  TRG_FCAL_BCAL_m8_b1bf1.conf
#! CONFIG FILE:: /home/hdops/CDAQ/daq_dev_v0.31/daq/config/hd_all/TRG_FCAL_BCAL_m8_b1bf1.conf
#! (Re)Created:: on  Wed Apr 29 12:06:51 EDT 2015
#!
#  DSC2_WIDTH      20  40     <- TDC width (ns),   TRG width (ns)
#  DSC2_THRESHOLD  20  50     <- board threshold:  TDC threshold (mV), TRG threshold (mV)
#
#  TS_TRIG_TYPE  1  -  Internal Pulser
#                2  -  External FP
#                4  -  GTP
#                6  -  GTP + External
#
#
#  TS_FP_INPUTS  - List of enabled  FP  inputs
#   
#
#  TS_SOFT_TRIG
#    Trigger type (type 1 or 2 for playback)
#    Number of events to trigger
#    Period multiplier (depends on range 0-0x7FFF)
#    Range 1  -   min  120ns, increments of 30ns up to 983.13u
#          2  -   min  120ns, increments of 30.72us up to 1.007s
#
#
#  TI_MASTER 1 - Stand alone with master TI
#
#  TI_MASTER_TRIG 1 - soft, 2 - external pulser, 3 - playback
#
#  TI_SOFT_TRIG
#    Trigger type (type 1 or 2 for playback)
#    Number of events to trigger
#    Period multiplier (depends on range 0-0x7FFF)
#    Range 1  -   min  120ns, increments of 30ns up to 983.13u
#          2  -   min  120ns, increments of 30.72us up to 1.007s
#
#  F1TDC_CLOCK     0       <- Clock Source (0 = Internal 32 MHz)
#                                       (1 = External 31.25 MHz)
#  F1TDC_VERSION   2       <- Module Version (2 = High Resolution, synchronous, 32 channels)
#                                         (3 = Normal Resolution, synchronous, 48 channels)
# set bin size from 0.056 to 0.058 -> Beni!
#  F1TDC_BIN_SIZE  0.058   <- Bin size (ns)
#  F1TDC_LATENCY   3000.0  <- Trigger latency (ns)
#  F1TDC_WINDOW    1000.0  <- Trigger window (ns)



==========================
        TRIGGER
==========================


USE_PLAYBACK  0

TS_TRIG_TYPE  6

TS_SOFT_TRIG  2  65535   0x1F  1

TS_FP_INPUTS  3  5  6  9  10  12


TS_FP_DELAY   3    427
 
TS_FP_DELAY   5    417

TS_FP_DELAY   6    370

TS_FP_DELAY   9    23
TS_FP_DELAY   10   21


TS_TD_SLOTS  10  3  4  9  7  8  15  14  


# SSP      SLOT      FIBER_EN    SUM_ENABLE
SSP_SLOT     14         0x1        1

#FCAL
SSP_SLOT     9         0x3F        1
SSP_SLOT    10         0x3F        1

#PS
SSP_SLOT     5         0x02        0

# ST
SSP_SLOT     6         0x1         0

# TAGH
SSP_SLOT     4         0x1         0


#            TYPE       DELAY     INT_WIDTH     ENABLE
# Spring 2017 initial 

TRIG_EQ      PS          35         10           1
TRIG_EQ      BCAL_E      12         20           0
TRIG_EQ      BCAL_C      20          0           0
TRIG_EQ      FCAL        8          10           1
TRIG_EQ      ST          31          3           1
TRIG_EQ      TOF         20         10           0
TRIG_EQ      CCAL        4          15           1

# Change ST time to from 30 to 31 and TAGH delay from 105 to 106 
TRIG_EQ      TAGH        106         0           1

#            TYPE      LATENCY     WIDTH     FCAL_E    BCAL_E     EN_THR   NHIT LANE    FCAL_EMIN   FCAL_EMAX  BCAL_EMIN   BCAL_EMAX   PATTERN

TRIG_TYPE     CFCAL       440        5         4         9        43000     0     0            0         65535        0        65535

TRIG_TYPE     CFCAL       440        5         1         0        10750     0     1            0         65535        0        65535

TRIG_TYPE     CFCAL       440        5         0         1        4778      0     10           0         65535        0        65535


TRIG_TYPE     PS          440        5        1300      1900       1100     0     3


# TRIG_TYPE     TAGH        440        4        1           1       1100      1     6          0         65535       0          65535     0xF000
# TRIG_TYPE     ST          440        4       1300      1900       1100      1     7 

# TRIG_TYPE     TAGH        440        4        1           1       1100      1     8          0         65535       0          65535     0xF000 
# TRIG_TYPE     ST          440        4       1300      1900       1100      1     8 



TS_GTP_PRES  8  7

TRIG_DELAY  0
DAC_CALIB   0 

TI_FIBER_LATENCY_OFFSET  0x98


TS_COIN_WIND  15

# TEST 2, THR = 3
TS_TRIG_HOLD  1  10    0
TS_TRIG_HOLD  2  127   0
TS_TRIG_HOLD  4  40    0
TS_TRIG_HOLD  3  2     1


# TS_SYNC_INT  1000
# 2/7/16 changed to 5000

#TS_SYNC_INT  5000
# Alex check 3/9/2019
TS_SYNC_INT  3000

BLOCKLEVEL   40
BUFFERLEVEL  4


==========================
        GLOBAL  
==========================

F1TDC_BIN_SIZE   0.058

FADC250_BUSY 3

FADC125_BUSY 3

FADC250_FORMAT  2

FADC125_FORMAT  1


==========================
         FCAL   
==========================

FADC250_MODE         9
# FADC250_W_OFFSET     820
# Changed from 820 to 805 (12/15/16)

FADC250_W_OFFSET     805
#FADC250_W_WIDTH      100
# Changed from 100 to 70 (12/17/2016)
FADC250_W_WIDTH      100
FADC250_NSB          1
FADC250_NSA          15 
FADC250_NPEAK        3

FADC250_NSAT         2

FADC250_READ_THR      108

FADC250_TRIG_BL      100
FADC250_TRIG_THR     165
FADC250_TRIG_NSB     3
FADC250_TRIG_NSA     10

FADC250_COM_DIR      /gluex/CALIB/ALL/fadc250/default
FADC250_COM_VER      default


# FADC250_USER_DIR     /gluonfs1/gluex/CALIB/FCAL/fadc250/user/spring_2016
# FADC250_USER_VER     ring4_hot_v1

# FADC250_USER_DIR     /gluonfs1/gluex/CALIB/FCAL/fadc250/user/spring_2016
# FADC250_USER_VER     ring3_hot_v1


# FADC250_USER_DIR     /gluonfs1/gluex/CALIB/FCAL/fadc250/user/spring_2016
# FADC250_USER_VER     ring2_hot_v1

# Used in the begining of production in spring 2017
# FADC250_USER_DIR     /gluonfs1/gluex/CALIB/FCAL/fadc250/user/spring_2016
# FADC250_USER_VER     ring2_hot_v2

# FADC250_USER_DIR     /gluonfs1/gluex/CALIB/FCAL/fadc250/user/spring_2016
# FADC250_USER_VER     ring1_hot_v1

# FADC250_USER_DIR     /gluonfs1/gluex/CALIB/FCAL/fadc250/user/spring_2016
# FADC250_USER_VER     ring_hot_v1

# Latest from spring 2017
# FADC250_USER_DIR     /gluonfs1/gluex/CALIB/FCAL/fadc250/user/spring_2017
# FADC250_USER_VER     ring2_hot_v2

# FADC250_USER_DIR     /gluonfs1/gluex/CALIB/FCAL/fadc250/user/spring_2018
# FADC250_USER_VER     ring2_hot_v1

# Changed by Alex on 1/24/18
# FADC250_USER_DIR     /gluonfs1/gluex/CALIB/FCAL/fadc250/user/spring_2018
# FADC250_USER_VER     ring2_hot_v2

# Alex Test
# FADC250_USER_DIR     /gluonfs1/gluex/CALIB/FCAL/fadc250/user/fall_2018
# FADC250_USER_VER     ring2_hot_v1

# Changed by Alex on 4/7/18
# FADC250_USER_DIR     /gluonfs1/gluex/CALIB/FCAL/fadc250/user/spring_2018
# FADC250_USER_VER     ring2_hot_v3


# Changed by Alex on 4/7/18
# FADC250_USER_DIR     /gluonfs1/gluex/CALIB/FCAL/fadc250/user/ccal_2018
# FADC250_USER_VER     hot_v3

# Test
FADC250_USER_DIR     /gluonfs1/gluex/CALIB/FCAL/fadc250/user/ccal_2018
FADC250_USER_VER     


==========================
         CCAL   
==========================

FADC250_MODE         9

FADC250_W_OFFSET     805
#FADC250_W_OFFSET     900
FADC250_W_WIDTH      100
FADC250_NSB          1
FADC250_NSA          15 
FADC250_NPEAK        3

FADC250_NSAT         2

FADC250_READ_THR     108

FADC250_TRIG_BL      100
#FADC250_TRIG_THR     200 Originally used for CCAL
FADC250_TRIG_THR     130
# Test Rate A.S
# FADC250_TRIG_THR     110

FADC250_TRIG_NSB     3
FADC250_TRIG_NSA     15

FADC250_COM_DIR      /gluex/CALIB/ALL/fadc250/default
FADC250_COM_VER      default

FADC250_USER_DIR     /gluonfs1/gluex/CALIB/FCAL/fadc250/user/spring_2018
FADC250_USER_VER     


# Configuration of CCAL reference PMTs

FADC250_MODE_REF         10
FADC250_W_OFFSET_REF     805
FADC250_W_WIDTH_REF      100

FADC250_READ_THR_REF     150


==========================
         BCAL   
==========================
# change offset from 905 to 885 -> Beni 6.10.2014 afternoon
# also change NSB and NSA from 3/6 to 5/40
FADC250_MODE         9
# Changed from 825 to 820 (2/26/15)
# FADC250_W_OFFSET     820
# Changed from 820 to 815 (12/15/16)
FADC250_W_OFFSET     815
# MMD 2017-01-27
FADC250_W_WIDTH      100
FADC250_NSB          1
FADC250_NSA          26
FADC250_NPEAK        1

FADC250_NSAT         2

# MMD threshold from 110 to 105 (2014-12-05)
FADC250_READ_THR     105

FADC250_TRIG_BL      100

FADC250_TRIG_THR     120
FADC250_TRIG_NSB     3
FADC250_TRIG_NSA     19


FADC250_COM_DIR      /gluex/CALIB/ALL/fadc250/default
FADC250_COM_VER      default

FADC250_USER_DIR    /gluex/CALIB/ALL/user
FADC250_USER_VER      


#  F1 TDC

#change latency from 900. to 3540. and window from 500 to 1000 ->Beni
# F1TDC_WINDOW     1000.
# Changed from 1000 to 400 (12/17/2016)
F1TDC_WINDOW     400.
F1TDC_LATENCY    3400.
# set bin size from 0.056 to 0.058 -> Beni!

F1TDC_CLOCK     1

#  LE discriminator

DSC2_WIDTH       20   40 
DSC2_THRESHOLD   35   50

DSC2_COM_DIR      /gluex/CALIB/ALL/dsc/default
DSC2_COM_VER      default


==========================
         TOF   
==========================
# change latency and width from 510/200 to 910/100
# and change NSB and NSA from 3/6 to 5/20
# btw. it is BENI
# changed NSB & NSA from 5/20 to 10/45  (eugenio)
FADC250_MODE         9
# FADC250_W_OFFSET     810
# Changed from 820 to 815 (12/15/16)
FADC250_W_OFFSET     800
# FADC250_W_WIDTH      100
# Changed from 100 to 70 (12/17/2016)
# Changed from 70 to 80 (02/01/2017)
FADC250_W_WIDTH      100
FADC250_NSB          1
FADC250_NSA          10
FADC250_NPEAK        3

FADC250_NSAT         2

FADC250_READ_THR     160


FADC250_TRIG_BL      100
FADC250_TRIG_THR     110 
FADC250_TRIG_NSB     3
FADC250_TRIG_NSA     15



FADC250_COM_DIR      /gluex/CALIB/ALL/fadc250/default
FADC250_COM_VER      default

FADC250_USER_DIR    /home/
FADC250_USER_VER    

# CTP_BCAL_THR   56000


#  LE discriminator

DSC2_WIDTH        20   40 
# Default
DSC2_THRESHOLD   -12  -12
DSC2_COM_DIR      /gluex/CALIB/ALL/dsc/default
DSC2_COM_VER      default


#  CAEN 1290

#TDC1290_W_WIDTH    750

#TDC1290_W_WIDTH    3800
# Changed from 3800 to 1000 (12/17/2016)
# Changed from 1000 to 800  (02/01/2017)
TDC1290_W_WIDTH    800
#TDC1290_W_OFFSET -1750
#TDC1290_W_OFFSET -3640
TDC1290_W_OFFSET -3660
TDC1290_W_EXTRA    25
TDC1290_W_REJECT   50


TDC1290_BLT_EVENTS 1
TDC1290_N_HITS     64
TDC1290_ALMOSTFULL 16384
TDC1290_OUT_PROG   2

TDC1290_A24_A32    2
TDC1290_SNGL_BLT   3
TDC1290_SST_RATE   0
TDC1290_BERR_FIFO  1

TDC1290_EDGE       2

TDC1290_INL        1

# TDC1290_RC  SLOT  CHIP  TAP1  TAP2  TAP3  TAP4

 TDC1290_RC  3   0   5   1   4   3
 TDC1290_RC  3   1   5   5   1   3
 TDC1290_RC  3   2   7   2   7   4
 TDC1290_RC  3   3   2   2   7   7
 TDC1290_RC  4   0   0   1   6   3
 TDC1290_RC  4   1   0   6   1   4
 TDC1290_RC  4   2   3   2   0   3
 TDC1290_RC  4   3   1   1   5   7
 TDC1290_RC  5   0   6   0   1   6
 TDC1290_RC  5   1   5   4   1   6
 TDC1290_RC  5   2   2   1   2   3
 TDC1290_RC  5   3   3   1   7   5
 TDC1290_RC  6   0   1   4   6   6
 TDC1290_RC  6   1   2   5   0   6
 TDC1290_RC  6   2   7   0   7   5
 TDC1290_RC  6   3   5   7   1   3
 TDC1290_RC  7   0   3   1   6   6
 TDC1290_RC  7   1   3   0   3   3
 TDC1290_RC  7   2   7   4   1   3
 TDC1290_RC  7   3   0   2   7   7
 TDC1290_RC  8   0   7   7   0   4
 TDC1290_RC  8   1   5   1   7   7
 TDC1290_RC  8   2   3   0   4   2
 TDC1290_RC  8   3   0   0   0   4


==========================
         ST   
==========================
#change latency to 925 by BENI
# also change NSA and NSB from 3/6 to 5/20
FADC250_MODE         9
#FADC250_W_OFFSET     824
# Changed from 824 to 819 (12/15/16)
FADC250_W_OFFSET     819
#FADC250_W_WIDTH      100
# Changed from 100 to 80 (12/17/2016)
FADC250_W_WIDTH      100

FADC250_NSB          5
FADC250_NSA          20
FADC250_NPEAK        3

FADC250_NSAT         2

# change FADC250_READ_THR from 800 -> 110 by pooser (5 mV)
# change FADC250_READ_THR from 110 -> 120 by pooser (10 mV)
FADC250_READ_THR     120

FADC250_TRIG_BL      100
FADC250_TRIG_THR     300
FADC250_TRIG_NSB     3
FADC250_TRIG_NSA     15


FADC250_COM_DIR      /gluex/CALIB/ALL/fadc250/default
FADC250_COM_VER      default

FADC250_USER_DIR    /home/
FADC250_USER_VER    

#  F1 TDC
# change latency from 2100 to 3700
# F1TDC_WINDOW     1000.
# Changed from 1000 to 600 (12/17/2016)
F1TDC_WINDOW     600.
F1TDC_LATENCY    3460.

F1TDC_CLOCK     1

#  LE discriminator

# change DSC2_THRESHOLD from 100 -> 50 by pooser
DSC2_WIDTH       20   40 
DSC2_THRESHOLD   50   60



==========================
         TAGH  
==========================

FADC250_MODE         9
FADC250_W_OFFSET     895

FADC250_W_WIDTH      100
FADC250_NSB          3
FADC250_NSA          6
FADC250_NPEAK        3

FADC250_NSAT         2

# changed from 120 to 300
FADC250_READ_THR     300

FADC250_TRIG_BL      100
FADC250_TRIG_THR     300
FADC250_TRIG_NSB     3
FADC250_TRIG_NSA     6


FADC250_COM_DIR      /gluex/CALIB/ALL/fadc250/default
FADC250_COM_VER      default

FADC250_USER_DIR    /home/
FADC250_USER_VER    

# CTP_USE   0

#  F1 TDC
F1TDC_WINDOW     600.
F1TDC_LATENCY    3600.

F1TDC_CLOCK     1

#  LE discriminator

DSC2_WIDTH       20   40 
DSC2_THRESHOLD   45   45


==========================
         TAGM  
==========================

FADC250_MODE         9
# FADC250_W_OFFSET     895
# FADC250_W_OFFSET     905
# Changed from 905 to 819 (12/15/16)
FADC250_W_OFFSET     890
# FADC250_W_WIDTH      100
#changed from 100 to 60 (12/17/2016)
FADC250_W_WIDTH      60
FADC250_NSB          3
FADC250_NSA          6
FADC250_NPEAK        3

FADC250_NSAT         2

# For low gain mode
#FADC250_READ_THR     115 #(early spring 2016)
#FADC250_READ_THR     250 # 4/9/16 aeb
#FADC250_READ_THR     115 # 2/4/17 by AEB, new fibers not yet calibrated
FADC250_READ_THR     150 # 1/14/18 by AEB/RTJ
# For high gain mode
#FADC250_READ_THR     180   # (change 3/30/2016 by RTJ)
#FADC250_READ_THR     140
#FADC250_READ_THR     200   # (new defaults 4/21/16 by AEB)

FADC250_TRIG_BL      100
#FADC250_TRIG_THR     210
#FADC250_TRIG_THR     400 # (new defaults 4/21/16 by AEB)
#FADC250_TRIG_THR     115 # (match read thr, 2/4/17 by AEB)
FADC250_TRIG_THR     150 # (match read thr, 1/14/18 by AEB/RTJ)
FADC250_TRIG_NSB     3
FADC250_TRIG_NSA     15


FADC250_COM_DIR      /gluex/CALIB/ALL/fadc250/default
FADC250_COM_VER      default

# FADC250_USER_DIR    /gluex/CALIB/TAGM/fadc250/user/spring_2018
# FADC250_USER_VER    spring_2018_v1
# New thresholds from Richard, 9/29/2018
# FADC250_USER_VER    fall_2018_v1

# FADC250_USER_DIR    /gluex/CALIB/TAGM/fadc250/user/spring_2019
# FADC250_USER_VER    spring_2019_v1

# New thresholds for PrimEx from Richard, 9/16/2021
FADC250_USER_DIR    /gluex/CALIB/TAGM/fadc250/user/fall_2021
FADC250_USER_VER    fall_2021_v1
# for TAGM calibration only!
#FADC250_USER_VER    calib_v1


CTP_USE   0

#  F1 TDC

# F1TDC_WINDOW     600.
# changed from 600 to 500 (12/17/2016)
# changed from 500 to 300 (02/01/2017)
F1TDC_WINDOW     300.
F1TDC_LATENCY    3600.

F1TDC_CLOCK     1

#  LE discriminator
# Change for high gain mode

DSC2_WIDTH        20   40
#DSC2_THRESHOLD    20  20  (changed 2/10/16 by A.B.)
#DSC2_THRESHOLD    5    5  (changed for diamond alignment 2/20/16)
#DSC2_THRESHOLD    12    12 
#DSC2_THRESHOLD    100    150  #(changed 3/30/2016 by RTJ)
#DSC2_THRESHOLD    80    80  #(new defaults 4/21/16 by AEB)
#DSC2_THRESHOLD    12    12 # 2/5/17 by AEB, new fiber calib not finished

#DSC2_COM_DIR /gluex/CALIB/ALL/dsc/default
#DSC2_COM_VER spring_2017_v3

# New thresholds from Richard, 1/17/2018
# New thresholds from Richard, 9/29/2018
# DSC2_COM_DIR    /gluex/CALIB/ALL/dsc/spring-2018
# DSC2_COM_VER    fall_2018_v1
# DSC2_COM_DIR    /gluex/CALIB/ALL/dsc/spring-2019
# DSC2_COM_VER    spring_2019_v1
# New thresholds from Richard, 9/16/2021

DSC2_COM_DIR    /gluex/CALIB/ALL/dsc/fall_2021
DSC2_COM_VER    fall_2021_v1
# for TAGM calibration only!
#DSC2_COM_VER    calib_v1


==========================
        PS  
==========================

FADC250_MODE         9
# FADC250_W_OFFSET     850
# Changed from 850 to 835 (12/15/16)
FADC250_W_OFFSET     835
FADC250_W_WIDTH      100
FADC250_NSB          3
FADC250_NSA          10
FADC250_NPEAK        3

FADC250_READ_THR     130

FADC250_TRIG_BL      100
FADC250_TRIG_THR     200
FADC250_TRIG_NSB     3
FADC250_TRIG_NSA     15

FADC250_COM_DIR      /gluex/CALIB/ALL/fadc250/default
FADC250_COM_VER      default

FADC250_USER_DIR    /home/somov/conf/cosmic
FADC250_USER_VER    

==========================
        PSC  
==========================

FADC250_MODE         9
#FADC250_W_OFFSET     850
# Changed from 850 to 835 (12/15/16)
FADC250_W_OFFSET     835
FADC250_W_WIDTH      100
FADC250_NSB          3
FADC250_NSA          6
FADC250_NPEAK        3

FADC250_READ_THR     150

FADC250_TRIG_BL      100
FADC250_TRIG_THR     150
FADC250_TRIG_NSB     3
FADC250_TRIG_NSA     6

#  F1 TDC

F1TDC_WINDOW     600
F1TDC_LATENCY    3540
F1TDC_CLOCK     1


#  LE discriminator

DSC2_WIDTH       20   40 
DSC2_THRESHOLD   40   40

==========================
        TPOL  
==========================

FADC250_MODE         10
# Sebastian, Alex increase from 795 to 832 12/19/2017
FADC250_W_OFFSET     832
# Sebastian, Alex increase from 100 to 150 12/19/2017
FADC250_W_WIDTH      50
# Changed 01/23/18 Sebastian, Beni
#FADC250_W_WIDTH      500
#Switched back to 150 1/26/18

FADC250_NSB          3
FADC250_NSA          10
FADC250_NPEAK        1

# FADC250_READ_THR     133
# Changed 12/16/16
#FADC250_READ_THR     160
# Changed 02/04/17
#FADC250_READ_THR     150
# Changed 01/23/18 Sebastian, Beni
FADC250_READ_THR     4000
#Switched back to 150 1/26/18

FADC250_TRIG_BL      100
FADC250_TRIG_THR     500
FADC250_TRIG_NSB     3
FADC250_TRIG_NSA     6


==========================
         CDC
==========================
# CDC_short      3
# CDC_long       6
# FDC_short      4
# FDC_amp_short  5 
# FDC_sum_long   7
# FDC_amp_long   8

#  Modes 3 and 6:  IE = 200  and ABIT = 3
#  Modes 5 and 8:  IE = 10   and ABIT = 0


# Default read out mode before 02/25/2018
# FADC125_MODE         5
# New read out mode requested by Naomi on 02/25/2018
FADC125_MODE         3



# FADC125_W_OFFSET     425
# FADC125_W_OFFSET     415

# Production 2018 02/23/18
#FADC125_W_OFFSET     438
# Lyubomit Tests 02/23/18
FADC125_W_OFFSET     418

# Default window size 02/25/2018
FADC125_W_WIDTH      200
# Modified by Naomi's request 02/25/2015
# FADC125_W_WIDTH      174


# Changed by Naomi from 200 to 10 on 12/21/17
# FADC125_IE           10
# New value requested by Naomi on 02/25/2018
FADC125_IE           200

FADC125_NPEAK        1

FADC125_PG          4
FADC125_P1          4
FADC125_P2          4

FADC125_IBIT        4

# FADC125_ABIT        0
# New value requested by Naomi on 02/25/2018
FADC125_ABIT        3

FADC125_PBIT        0

FADC125_TH          60
FADC125_TL          10

FADC125_THR         500
FADC125_DAC         800

# FADC125_COM_DIR      /gluex/CALIB/ALL/fadc125/default
# FADC125_COM_VER      default

# FADC125_COM_DIR      /gluex/CALIB/ALL/fadc125/fall2017
# FADC125_COM_VER      fall2017C

# New calibration from Beni 11/22/2017 Naomi's thresholds 12/18/2017
# FADC125_COM_DIR        /gluex/CALIB/ALL/fadc125/fall2017
# FADC125_COM_VER        spring18

# New thresholds from Naomi 2/2/2018
# FADC125_COM_DIR        /gluex/CALIB/ALL/fadc125/fall2017
# FADC125_COM_VER        spring2018_B

# New thresholds from Naomi 3/27/2018
# FADC125_COM_DIR        /gluex/CALIB/ALL/fadc125/fall2017
# FADC125_COM_VER        spring2018_D

# file for threshold scans
# FADC125_COM_VER        spring18_TH160

# New calibration from Beni 
# FADC125_COM_DIR        /gluex/CALIB/ALL/fadc125/fall2019
# FADC125_COM_VER        summer20_B

# New calibration from Beni 2021/08/02
FADC125_COM_DIR        /gluex/CALIB/ALL/fadc125/summer2021
FADC125_COM_VER        summer2021


FADC125_USER_DIR     /gluex/
FADC125_USER_VER    


==========================
         FDC
==========================
# CDC_short      3
# CDC_long       6
# FDC_short      4
# FDC_amp_short  5 
# FDC_sum_long   7
# FDC_amp_long   8


FADC125_MODE         5
# FADC125_W_OFFSET    425
# FADC125_W_OFFSET    411
# FADC125_W_OFFSET     434
# Changed from 434 to 414   => SF: 414 is OK,see RUN 22012 Sun Dec 18 02:02:32 EST 2016
FADC125_W_OFFSET     414

FADC125_W_WIDTH      80
FADC125_IE           16
FADC125_NPEAK        1

FADC125_PG          4
FADC125_P1          4
FADC125_P2          4

FADC125_IBIT        4
FADC125_ABIT        0
FADC125_PBIT        0

FADC125_TH          40
FADC125_TL          10

FADC125_THR         70
FADC125_DAC         800

# New calibration from Beni  11/22/2017
# FADC125_COM_DIR        /gluex/CALIB/ALL/fadc125/fall2017
# FADC125_COM_VER        spring2018_D

# New calibration from Beni  8/01/2018
# FADC125_COM_DIR        /gluex/CALIB/ALL/fadc125/fall2018
# FADC125_COM_VER        fall18_B

# FADC125_COM_DIR        /gluex/CALIB/ALL/fadc125/fall2019
# FADC125_COM_VER        summer20

# New calibration from Beni 2021/08/02
FADC125_COM_DIR        /gluex/CALIB/ALL/fadc125/summer2021
FADC125_COM_VER        summer2021

FADC125_USER_DIR     /gluex/
FADC125_USER_VER    

#  F1 TDC
# change latency and window back to what we expect from ADCs (Beni) 
# F1TDC_WINDOW     1400. 
# F1TDC_LATENCY    3560.

F1TDC_WINDOW     600. 
F1TDC_LATENCY    3360.


# High-resolution board in slot 17
# changed by Beni (loser) 2014.10.6
F1TDC_HR_WINDOW     1000.
F1TDC_HR_LATENCY    1160.
# set bin size from 0.056 to 0.058 -> Beni!
#F1TDC_HR_BIN_SIZE   0.058


F1TDC_CLOCK     1