BCAL Reconstruction Meeting 2014-05-29
Video Conferencing Information
Meeting Time: 11:15 a.m. EDT
- To join via a Web Browser, go to the page  https://bluejeans.com/907185247.
- To join via Polycom room system go to the IP Address: 22.214.171.124 (bjn.vc) and enter the meeting ID: 907185247.
- To join via phone, use one of the following numbers and the Conference ID: 907185247.
- US or Canada: +1 408 740 7256 or
- US or Canada: +1 888 240 2560
- Upon connection all microphones are automatically muted. To unmute your mike on a Polycom or equivalent unit, enter *4. Unmuting on a computer is trivial as there is a microphone button than can be clicked.
- More information on connecting to bluejeans is available.
Participant Direct Lines
- JLab Phone: in CC F326 is 757-269-6460 (usual room)
- JLab Phone in CC L207 is 757-269-7084
- Phone in the Regina Video-conference Suite is 306-585-4204
Introduce FPGA timing algorithm to derive hit times from fADC
- "Curvature effect": incorporate Andrei's and Irina's parametrization of this effect into the KLOE and IU codes and establish that this closes the gap in cluster handling between the two codes. (Andrei/Irina)
- Start developing BDT variables for cluster handling in the BCAL Reconstruction. (Tegan)
- Constants in code should be transferred to database; list of parameters for ccdb storage.
- Action Items
- Assign tasks (see BCAL Reconstruction Meeting 2014-05-06)
- Any other business
Attendees: David, Mark (JLab), Will (CMU), Tegan, Andrei, Zisis (Regina)
- Announcements: none
- Action Items:
- JANA: no progress. It handles things up to the application of the calibration constants. Now we can use data.
- Constants in code: time-walk corrections are possibly not in their final form. Once we finalize this it would make sense to move the constants into the ccdb. Ditto for the energy correction factor. Also, gains are not in the code. Mark and David commented on DBCALHit and DBCALTDCHit factory objects. HDDM assumes that pedestals and gains have been applied to the data in EVIO. We need lower level objects such as DBCALDigiHit factory that exists right now, however, with hard coded numbers. We should use it with the BCAL data that we are gathering now (cosmics). Also, the 3rd word in the flash will contain the pedestal info, on an event by event basis. Some thinking is needed in how to handle the pedestals if not available in the stream or outside some predefined range (ie. have default values).
- Data Format: Currently, all detector systems are reading out the full waveform data.
- No one is reading the Pulse Integral, Pulse Time, and PulsePedestal format.
- BCAL can do this and should be the trailblazer so the raw data parsing code can be tested.
- The PulsePedestal format in particular is new and requires additions to the parsing code. Having actual data from a fADC250 will make this much easier.
- The fADC125 firmware is currently being developed and does not yet have all pulse finding features available like the fADC250.
- Engineering and calibration runs will use the 3 word data format in order to get event by event pedestal readings.
- By the end of 2015 we expect a firmware update to the fADC250 that will fit all of the information into just 2 words.
- Assign tasks: Tegan will slowly tackle MCSMEAR (code, formalisms, constants). Will is happy to act as a 'consultant' and provide help.
- Updates: none at present
- Any other business
- EventViewer: It needs a lot of work. Code is very complex and not well documented. There 2 CNU and 2 Regina students (at Regina) that could work on it, provided Mark/David can make it more modular and provide some standard to do the coding. Examples of modules would be 'BCAL zoom-in', TOF, Tagger, Pair Spectrometer, START, data visualization. Mark/David will report on this at a later date.