View source for Standard Beamline Quadrupole Specification

Below is the spec for a standard JLAB QP magnet. At 19amps, it can just make the spec for the Hall D tagger.
<table bgcolor="#e0e0f0">
<tr><td>Bore</td><td>3.81 cm</td><td>1.5 in</td></tr>
<tr><td>Length</td><td>30.48 cm</td></tr>
<tr><td>Max B'l</td><td>75 kG</td><td>at 18 A (design current)</td></tr>
<tr><td>&nbsp;</td><td>82 kG</td><td>at 19 A (depends on cable run)</td></tr>
</table>