View source for Run Coordinator report: Summer 2020 w3

I am happy to report that, we had a good week of running. The data 
production rate started at around 1.3B triggers per day (last Thursday), 
and reached as high as 4B triggers per day(Tuesday). We ran standard 
data production when beam was available and all harp scan results looked 
good. The total trigger collected: ~22B triggers.

We were scheduled for 162 hours of running, and the beam on target was 
95.5 hours. We lost in total 9.8 hours (10%) of the usable beam time. 
Apart from the standard radiator setting change overhead and DAQ 
starting/stopping, the vacuum pump and DIRC HV tripping diagnose cost 3 
hours of down time. The planned maintenance (Tuesday morning) were 
successful, DIRC and FCAL were fully back online afterwards.

Looking ahead, we are likely to complete the low current running and TAC 
run in the next few days. The discussions on the CPP  and trigger test 
are still ongoing, since the run period was extended to September 21, 
there is plenty of time to complete these tasks. Note that Hall C 
changing target will occur on this Friday (for three days) and the one 
pass running is now scheduled on August 31th.

Pending issues: TAGM control boards are still being diagnosed and TAGH 
dist counter are still not functioning properly.