Revision as of 17:31, 17 May 2012

May 17, 2012 FDC meeting

Agenda

Production Construction Tracking (Dave)
- Production status
- Third package tests (Lubomir)
Engineering update
Electronics update (Chris)
- Grounding
Tests with first package in 126 FDC E-log (Beni)
Other

@@ Line 15: / Line 15: @@
 = Minutes =
-Participants: Dave, Chris, Nick, Simon, Beni, Mark, and Lubomir.
+Participants: Bill, Dave, Chris, Nick, Mark, Simon, Beni, and Lubomir.
 == Production ==
-- Dave for package #4 production: working now on four cathodes, there's one more and we will be done with all the cathodes for this package, then continuing with the spare cathodes. Chris will put the elements on wire plane #26; #24 and #25 were deadened. Wire frame #27 is on the stringing table. Received wire frame #18 back from the machine shop. They fixed some of the frame holes that were not correct, these are used to attach the frame to the strong-back for stringing.
+- Dave for package #4 production: on wire frame #27 tension measurements were done, #28 will go on the stringing table next (the last for the package). #26 and #27 will be deadened on Monday. #26 has components, Chris will put components on #27 Monday/Tuesday. Working now on all the remaining cathodes for the package.
 - Today we continued with the installation of the last two cells of the third package. Before the installation, in one of the new wire planes we found one broken wire (between the pad and the epoxy) that was fixed on Tuesday and checked on Wednesday. After the meeting all the cells of package #3 were installed and started flushing with gas.