Difference between revisions of "HallD Online IP Name And Address Conventions"
From GlueXWiki
(→Hall D Internal Networks) |
(→Controllers and fan trays for VXS/VME crates) |
||
Line 35: | Line 35: | ||
=== Controllers and fan trays for VXS/VME crates === | === Controllers and fan trays for VXS/VME crates === | ||
− | * Use "roc<b><i>name</i></b>" for | + | * Use "roc<b><i>name</i></b>" for interface 0 which will be used by the fast DAQ. For instance <b>rocfdc1</b> |
− | * For controls and monitoring we can use | + | * For controls and monitoring we can use interface 1 on the controller called "ioc<b><i>name</i></b>". For instance, <b>iocfdc1</b> . |
− | + | ||
* For the fan trays we can use "vme<b><i>name</i></b>". For instance, <b>vmefdc1</b> . | * For the fan trays we can use "vme<b><i>name</i></b>". For instance, <b>vmefdc1</b> . | ||
− | |||
=== Embedded devices === | === Embedded devices === | ||
* Continue notation "halld<b><i>device</i></b>", where <i>device</i> is the name that describes the device type and the number of that device. For instance, <b>hallden2t2.jlab.org</b> or <b>halldbrooks1.jlab.org</b>. Or for High Voltage and Low Voltage devices <b>halldcaen1</b>, <b>halldmpod1</b>, <b>halldcan1</b>. For the main file server we can use <b>halldfs1</b>, and for fast the RAID file servers we can use <b>halldraid1</b>, <b>halldraid2</b>. | * Continue notation "halld<b><i>device</i></b>", where <i>device</i> is the name that describes the device type and the number of that device. For instance, <b>hallden2t2.jlab.org</b> or <b>halldbrooks1.jlab.org</b>. Or for High Voltage and Low Voltage devices <b>halldcaen1</b>, <b>halldmpod1</b>, <b>halldcan1</b>. For the main file server we can use <b>halldfs1</b>, and for fast the RAID file servers we can use <b>halldraid1</b>, <b>halldraid2</b>. |
Revision as of 22:00, 26 February 2013
This page provides the information on conventions on IP name and address on the devices routed off the Hall D main Cisco router.
Contents
Hall D Internal Networks
Purpose | Network | VLAN | Number of Addresses | Broadcast Address |
---|---|---|---|---|
Controls | 129.57.26.0/23 | VLAN 526 | 512 | 129.57.27.255 |
DAQ / General | 129.57.172.0/22 | VLAN 672 | 1024 | 129.57.75.255 |
Development | 129.57.194.0/24 | VLAN 694 | 256 | 129.57.194.255 |
Infiniband | Not defined | Not Defined | 256 | Not Defined |
IP name conventions
Desktop Computers and Servers
- Use gluonxx.jlab.org for the online servers main IP addresses. The name comes from GLUex ONline abbreviation.
- If we want to keep the same name for Lelvel 3 farm servers, then we will need to use gluonxxx.jlab.org.
- The additional Ethernet ports will be labeled gluonxx_y.jlab.org for servers with multiple interfaces.
Controllers and fan trays for VXS/VME crates
- Use "rocname" for interface 0 which will be used by the fast DAQ. For instance rocfdc1
- For controls and monitoring we can use interface 1 on the controller called "iocname". For instance, iocfdc1 .
- For the fan trays we can use "vmename". For instance, vmefdc1 .
Embedded devices
- Continue notation "hallddevice", where device is the name that describes the device type and the number of that device. For instance, hallden2t2.jlab.org or halldbrooks1.jlab.org. Or for High Voltage and Low Voltage devices halldcaen1, halldmpod1, halldcan1. For the main file server we can use halldfs1, and for fast the RAID file servers we can use halldraid1, halldraid2.