Difference between revisions of "HallD Online IP Name And Address Conventions"
From GlueXWiki
(→Hall D Internal Networks) |
|||
| Line 11: | Line 11: | ||
!width="200" | Broadcast Address | !width="200" | Broadcast Address | ||
|- | |- | ||
| − | | Controls || 129.57.26.0/23 || | + | | Controls || 129.57.26.0/23 || VLAN 526 || 512 || 129.57.27.255 |
|- | |- | ||
| DAQ / General || 129.57.172.0/22 || VLAN 672 || 1024 || 129.57.75.255 | | DAQ / General || 129.57.172.0/22 || VLAN 672 || 1024 || 129.57.75.255 | ||
| Line 17: | Line 17: | ||
| Development || 129.57.194.0/24 || VLAN 694 || 256 || 129.57.194.255 | | Development || 129.57.194.0/24 || VLAN 694 || 256 || 129.57.194.255 | ||
|- | |- | ||
| − | | Infiniband || | + | | Infiniband || 172.19.5.0/24 || Local || 256 || 172.19.5.255 |
|- | |- | ||
|} | |} | ||
<br/ clear="all"> | <br/ clear="all"> | ||
| − | |||
== IP Name Conventions == | == IP Name Conventions == | ||
Revision as of 14:30, 28 February 2013
This page provides the information on conventions on IP name and address on the devices routed off the Hall D main Cisco router.
Contents
[hide]Hall D Internal Networks
| Purpose | Network | VLAN | Number of Addresses | Broadcast Address |
|---|---|---|---|---|
| Controls | 129.57.26.0/23 | VLAN 526 | 512 | 129.57.27.255 |
| DAQ / General | 129.57.172.0/22 | VLAN 672 | 1024 | 129.57.75.255 |
| Development | 129.57.194.0/24 | VLAN 694 | 256 | 129.57.194.255 |
| Infiniband | 172.19.5.0/24 | Local | 256 | 172.19.5.255 |
IP Name Conventions
Desktop Computers and Servers
- Use gluonxx.jlab.org for the online servers main IP addresses. The name comes from GLUex ONline abbreviation.
- If we want to keep the same name for Lelvel 3 farm servers, then we will need to use gluonxxx.jlab.org.
- The additional Ethernet ports will be labeled gluonxx_y.jlab.org for servers with multiple interfaces.
- We can divide the numbers into ranges for different types of servers :
| Type | Name Range |
|---|---|
| Desktops | gluon00 - gluon19 |
| General Purpose Servers | gluon20 - gluon39 |
| EMU | gluon40 - gluon59 |
| Level3 | gluon60 - gluon99 |
Controllers and fan trays for VXS/VME crates
- Use "rocname" for interface 0 which will be used by the fast DAQ. For instance rocfdc1
- For controls and monitoring we can use interface 1 on the controller called "iocname". For instance, iocfdc1 .
- For the fan trays we can use "vmename". For instance, vmefdc1 .
Embedded devices
- Continue notation "hallddevice", where device is the name that describes the device type and the number of that device. For instance, hallden2t2.jlab.org or halldbrooks1.jlab.org. Or for High Voltage and Low Voltage devices halldcaen1, halldmpod1, halldcan1. For the main file server we can use halldfs1, and for fast the RAID file servers we can use halldraid1, halldraid2.
