Difference between revisions of "Barrel Calorimeter"
From GlueXWiki
Line 1: | Line 1: | ||
+ | An example how to start DAQ for the stand alone BCAL (four north or south crates) with the external pulser (connected to the master TI). | ||
# Login to gluon49 under hdops | # Login to gluon49 under hdops | ||
# source /gluex/Subsystems/BCAL/setupcoda3 | # source /gluex/Subsystems/BCAL/setupcoda3 | ||
Line 10: | Line 11: | ||
# Data output: /gluex/Subsystems/BCAL/data/south4 | # Data output: /gluex/Subsystems/BCAL/data/south4 | ||
#::: /gluex/Subsystems/BCAL/data/north4 (default) | #::: /gluex/Subsystems/BCAL/data/north4 (default) | ||
− | # Due to some glitches in the firmware you have to start run first and then disable the external trigger | + | # Due to some glitches in the firmware you have to start run first and then disable the external trigger (will be fixed) |
Revision as of 14:00, 31 March 2014
An example how to start DAQ for the stand alone BCAL (four north or south crates) with the external pulser (connected to the master TI).
- Login to gluon49 under hdops
- source /gluex/Subsystems/BCAL/setupcoda3
- Start DAQ for 4 north or south crates: bcal_N4_start or bcal_S4_start
- terminate all DAQ processes bcal_N4_exit
- Choose configuration: Configurations-->Coda Config-->bcal_s4 (or bcal_n4)
- Settings in the Run Control (you have to set these variables once if you edit coda configuration with jcedit)
- Set User --> Runtime Variables --> Config File to /gluex/Subsystems/BCAL/bcal_pulser_ti/pulse
- Set User --> Runtime Variables --> List --> %(CODA_ROL) to /gluex/release/0.1/src/rol/bcal_base_ti
- FADC250 configuration files are located in /gluex/Subsystems/BCAL/bcal_pulser_ti
- Data output: /gluex/Subsystems/BCAL/data/south4
- /gluex/Subsystems/BCAL/data/north4 (default)
- Due to some glitches in the firmware you have to start run first and then disable the external trigger (will be fixed)