Revision as of 09:01, 25 April 2025

Meeting time and location:

Agenda

ECAL maintenance and performance during the run
- HV module disconnected from the EPICS control
- Bad flash ADC for reference PMTs
- Low-level histograms [1]
- Adjusting high voltages [2]
- Recent ECAL occupancy, production at 300 nA with 4x10^-4 X0 Al radiator [3]. Suspicious modules after the accelerator maintenance day
Calibrations
- Initial HV settings using Compton scattering events [4]
- Pi0 calibration page [5]
  - Pi0a are clearly seen for most ECAL modules (except the innermost ring)
Monitoring
Restoring PS test setup [6]
- The prototype has been assembled and tested. Ready for installing in Hall D
  - Move it to the Hall on Wednesday next week (?)

@@ Line 13: / Line 13: @@
 ** Initial HV settings using Compton scattering events  [https://logbooks.jlab.org/entry/4357131]
 ** Pi0 calibration page [https://halldweb.jlab.org/wiki/index.php/ECAL_Calibration]
-***
+*** Pi0a are clearly seen for most ECAL modules (except the innermost ring)
 * Monitoring
 * Restoring PS test setup [https://halldweb.jlab.org/detectors/fcal2/installation/meetings/08_09_2024/ps_setup.jpg]
 ** The prototype has been assembled and tested. Ready for installing in Hall D
 *** Move it to the Hall on Wednesday next week (?)