Difference between revisions of "Flow rate"
From GlueXWiki
Line 64: | Line 64: | ||
|} | |} | ||
− | 40 sccm total, 1850V (left) and 2050V (right) | + | 40 sccm total, 1850V (left) and 2050V (right) The little blip at ~ch 250 in the RH plot is an afterpulse, this is not noticeable at 2000V. |
{| border="0" cellpadding="2" | {| border="0" cellpadding="2" | ||
|width="400pt"| | |width="400pt"| |
Revision as of 15:54, 2 November 2010
Fe55 with premixed 50/50 Ar/CO2, New preamp and new HVB, ADC half-range, for a range of HV and (later) gas flow rate
From New HVB:
Mixed 50/50 at 80 sccm total, less HV
Mixed 50/50 at 40 sccm total - note the change in x-axis scale. The 2050V run was wrong initially, corrected 1340 Oct 27.
Various gas flow rates at 1850V (left) and 2050V (right)
Events at 80 sccm total, 1850V (left) and 2050V (right)
Events at 40 sccm total, 1850V (left) and 2050V (right)
As above, zoomed in on pedestal... 80 sccm total, 1850V (left) and 2050V (right)
40 sccm total, 1850V (left) and 2050V (right) The little blip at ~ch 250 in the RH plot is an afterpulse, this is not noticeable at 2000V.