Difference between revisions of "CDC 216 channels"
From GlueXWiki
Line 98: | Line 98: | ||
|[[Image:cdc_run32510_closehitch_zch.png|thumb|x250px|Channels with hit < 10 samples before zero-crossing in another channel]] | |[[Image:cdc_run32510_closehitch_zch.png|thumb|x250px|Channels with hit < 10 samples before zero-crossing in another channel]] | ||
|[[Image:cdc_run32510_trackedclosehitch_zch.png|thumb|x250px|Channels with tracked hit < 10 samples before zero-crossing in another channel. ]] | |[[Image:cdc_run32510_trackedclosehitch_zch.png|thumb|x250px|Channels with tracked hit < 10 samples before zero-crossing in another channel. ]] | ||
+ | |} | ||
+ | |||
+ | |||
+ | <hr/> | ||
+ | {| border="0" cellpadding="2" | ||
+ | |[[Image:cdc_run_32531_dt216.png|thumb|x250px|Run 32531 drift times]] | ||
+ | |[[Image:cdc_run_32532_dt216.png|thumb|x250px|Run 32532 drift times]] | ||
|} | |} |
Revision as of 17:54, 4 October 2013
Switched HVBs 3 and 5 (all electronics swapped at the chamber)
Event pics
These data (run 32488) were recorded using a filter in the event readout list, so only channels with 6 consecutive samples exceeding a threshold of 116 were recorded, provided that 5 channels had 8 consecutive samples over 124. (pedestal ~ 60, #sigma ~ 16)
Compare resolution with channels 68 (on noisy board E4) and 148 (similar position on different board E14)
Looking to see if zero-crossings are linked to hits in other channels. Zero-crossing time is the sample number when the adc content drops to 0 - pedestal is not subtracted. Pedestals are set to approx 60, with pedestal width ~ 16.
Switched HVBs 3 and 5 (first is at top, increase top to bottom, L to R)