Difference between revisions of "University of Connecticut Active Collimator Station Tutorial"
From GlueXWiki
Line 8: | Line 8: | ||
Figures 1 and 2 above serve to show the user how the active collimator station is connected to the actcol-station PC. I have labeled various components in Figure 1; their descriptions are below. Figure 2 shows the user how to connect everything to the PC. | Figures 1 and 2 above serve to show the user how the active collimator station is connected to the actcol-station PC. I have labeled various components in Figure 1; their descriptions are below. Figure 2 shows the user how to connect everything to the PC. | ||
− | + | '''1:''' | |
− | 1: | + | '''2:''' |
− | 2: | + | |
− | + | ||
Feel free to contact me at john DOT bartolotta AT uconn DOT edu with any questions. | Feel free to contact me at john DOT bartolotta AT uconn DOT edu with any questions. |
Revision as of 02:39, 14 January 2014
On January 7th, 2014, the active collimator station (computer name actcol-station) was positioned in room F117 of the CEBAF building at Jefferson Lab. This wiki page serves to teach how the station operates.
Figures 1 and 2 above serve to show the user how the active collimator station is connected to the actcol-station PC. I have labeled various components in Figure 1; their descriptions are below. Figure 2 shows the user how to connect everything to the PC.
1: 2:
Feel free to contact me at john DOT bartolotta AT uconn DOT edu with any questions.