Difference between revisions of "Standard Beamline Quadrupole Specification"
From GlueXWiki
| Line 1: | Line 1: | ||
Below is the spec for a standard JLAB QP magnet. At 19amps, it can just make the spec for the Hall D tagger. | Below is the spec for a standard JLAB QP magnet. At 19amps, it can just make the spec for the Hall D tagger. | ||
<table bgcolor="#e0e0f0"> | <table bgcolor="#e0e0f0"> | ||
| − | <tr><td>Bore<td>3.81 cm</td><td>1.5 in</td></tr> | + | <tr><td>Bore</td><td>3.81 cm</td><td>1.5 in</td></tr> |
<tr><td>Length</td><td>30.48 cm</td></tr> | <tr><td>Length</td><td>30.48 cm</td></tr> | ||
<tr><td>Max B'l</td><td>75 kG</td><td>at 18 A (design current)</td></tr> | <tr><td>Max B'l</td><td>75 kG</td><td>at 18 A (design current)</td></tr> | ||
<tr><td> </td><td>82 kG</td><td>at 19 A (depends on cable run)</td></tr> | <tr><td> </td><td>82 kG</td><td>at 19 A (depends on cable run)</td></tr> | ||
</table> | </table> | ||
Revision as of 11:01, 21 January 2008
Below is the spec for a standard JLAB QP magnet. At 19amps, it can just make the spec for the Hall D tagger.
| Bore | 3.81 cm | 1.5 in |
| Length | 30.48 cm | |
| Max B'l | 75 kG | at 18 A (design current) |
| 82 kG | at 19 A (depends on cable run) |
