Difference between revisions of "SC mcsmear resolutions"
From GlueXWiki
(Created page with "The measured Start Counter timing resolutions that are obtained from ST_Tresolution (for example) are currently stored in the CCDB table START_COUNTER/time_resol_paddle, and a...") |
(No difference)
|
Revision as of 18:32, 5 July 2017
The measured Start Counter timing resolutions that are obtained from ST_Tresolution (for example) are currently stored in the CCDB table START_COUNTER/time_resol_paddle, and are used as parameters in the reconstruction software and mcsmear. However, these resolutions are actually due to a convolution of the start counter and tracking resolutions. The "true" start counter resolution can in principle be obtained from MC simulations.
The following plots show the resulting output resolutions as a function of "true" input resolution.
HDGeant | HDGeant4 |
The results are fit with a linear function, output = p0 + p1 x input
HDGeant: p0 = 49.85 +- 3.40 p1 = 0.906 +- 0.014 HDGeant4: p0 = 63.65 +- 3.75 p1 = 0.882 +- 0.016
--- July 5, 2017, sdobbs