Difference between revisions of "March 4-11"

Revision as of 15:48, 7 March 2019

The source of the 20 sec oscillation in the target leak rate (see https://logbooks.jlab.org/entry/3662109) turned out to be oscillations in the spring loaded plate at the end of the H2 line which goes outside of the hall. Chris solved this issue by removing the N2 from the line, which shouldn't be an issue since we're running with LHe instead of LH2.
Target is full of liquid, the temperature is still dropping (will probably stabilize within the hour)
Need to check with David Lawrence to be sure target pressure and density is in data stream.
Ilya's plots showing total Be runs statistics: https://logbooks.jlab.org/entry/3662704
Some discussion needs to be had regarding the impact of using the drift chambers

Ilya's plots with some initial accidental subtraction: https://userweb.jlab.org/~ilarin/be/
Sasha's trigger studies: https://logbooks.jlab.org/entry/3663674
Sasha and Drew will work on uploading CCAL Geometry into database
Sasha mentions that we should add some plots characterizing pi0 and eta inv mass in FCAL to the monitoring routine.

@@ Line 8: / Line 8: @@
 ==Tuesday, March 5==
+* Ilya's plots with some initial accidental subtraction: https://userweb.jlab.org/~ilarin/be/
+* Sasha's trigger studies: https://logbooks.jlab.org/entry/3663674
+* Sasha and Drew will work on uploading CCAL Geometry into database
+* Sasha mentions that we should add some plots characterizing pi0 and eta inv mass in FCAL to the monitoring routine.
+==Wednesday, March 6==
+==Thursday, March 7==