Mcsmear updates
From GlueXWiki
Contents
Current Settings
General Comments
Smearing is performed by adding a Gaussian function, unless otherwise described.
TRIGGER_LOOKBACK_TIME = -100 ns
CDC
name | value | comment |
---|---|---|
CDC_TIME_WINDOW | 1000. | readout window (ns) |
CDC_PEDESTAL_SIGMA | 50.0 | charge smearing factor |
CDC_THRESHOLD_FACTOR | 4.0 | sparsification threshold = CDC_THRESHOLD_FACTOR* CDC_PEDESTAL_SIGMA |
CDC_TDRIFT_SIGMA | 2.8181818181818e-9 | drift time smearing width*1.0e-9 (ns) |
[more in hdgeant]
Noise parameterization from 2007.
FDC
name | value | comment |
---|---|---|
FDC_TIME_WINDOW | 1000. | readout window (ns) |
FDC_CATHODE_SIGMA | 150.0 | cathode charge smearing factor |
FDC_PED_NOISE | -> | charge smearing factor = -0.0938 + 0.0485*FDC_CATHODE_SIGMA |
FDC_THRESHOLD_FACTOR | 4.0 | sparsification threshold = FDC_THRESHOLD_FACTOR * FDC_PED_NOISE |
FDC_TDRIFT_SIGMA | 1.0-9 | drift time smearing width*1.0e-9 (ns) [both wire and cathode] |
[more in hdgeant]
Noise parameterization from 2007 [only wires].
FCAL
name | value | comment |
---|---|---|
FCAL_BLOCK_THRESHOLD | 0.02 | (GeV) |
time smearing | 200. | fixed in mcsmear (ps) |
FCAL_PHOT_STAT_COEF | 0.035 | |
energy smearing | -> | 1.0 + Gaussian( FCAL_PHOT_STAT_COEF / sqrt(E) ) |
TOF
name | value | comment |
---|---|---|
TOF_SIGMA | 0.155563 | time smearing factor |
TOF_PHOTONS_PERMEV | 8000. | conversion factor |
dE smearing | -> | Gaussian(sqrt(npe)) |
TOF_THRESH_MEV | 0 | threshold on smeared dE |
START COUNTER
name | value | comment |
---|---|---|
START_SIGMA | 0.3 | time smearing factor |
START_PHOTONS_PERMEV | 200. | conversion factor |
dE smearing | -> | Gaussian(sqrt(npe)) |
STC_THRESH_MEV | 0 | threshold on smeared dE |