Run Coordination Meetings: Fall 2016 Run
From GlueXWiki
Contents
Meeting General Agenda
Connect Information
To connect from the outside by phone please do the following
1.) To join via a Web Browser, go to the page [1] https://bluejeans.com/660743227.
2.) To join via Polycom room system go to the IP Address: 199.48.152.152 (bjn.vc) and enter the meeting ID: 660743227.
3.) To join via phone, use one of the following numbers and the Conference ID: 660743227.
4.) The moderator code is 8394
Dial Either +1 408 740 7256 or +1 888 240 2560 for US or Canada
4.) More information on connecting to bluejeans is available. The old ESNET and SeeVough Information is archived here.
Specific instructions for connecting from JLab's Hall D conference room:
- Turn polycon on if necessary (do it before turning the computer on)
- With the polycon, place a call at 199.48.152.152
- Press # to enable the polycom keypad, then enter the meeting id: 660743227 and #
- You may have to unmute the microphone: #*4
- Turn the computer on if needed
Beam and Hall configuration
- Beam energy expected: 11.632 GeV (include synchrotron radiation losses, except for the Hall D ramp).
- Solenoid on at 1350A ? Do we want to gather some data at different fields?). Any field changes should be avoided if possible.
- Beam current: CW 5 nA-1.5 μA. 250 MHz frequency. Entire run at same RF?
- Position slow lock on or FFB on? Current and energy locks on?)
- Radiators:
- Goniometer diamond radiators: TBD. We presently have test diamonds:
- (J1a50 (50 μm, 4.1·10-4 R.L.)),
- J2a100 (100 μm 8.2·10-4 R.L.),
- S145-S90 (90 μm, 7.4·10-4 R.L.) and
- JD70-3 (80 μm, 6.6·10-4 R.L.))
- We also have 3 test foils (two 10 μm Al foils, and one 100 μm Al foil with a holed 10 μm Al foil pressed on it (3mm hole)).
- We expect to have four additional diamonds, all 7mm by 7mm
- 20 micron
- 20 micron
- 50 micron
- 50 micron
- Amorphous
- 1.5 µm Al (1.7·10-5 R.L.)
- 10 µm Al (11.2·10-5 R.L.)
- 30 µm Al (33.7·10-5 R.L.)
- Goniometer diamond radiators: TBD. We presently have test diamonds:
- Collimator hole: Both 5 mm diameter and 3.4 mm diameter. Default running: 3.4 mm?
- Target: LH2 target: cryogenic target
General Information
This document describes the run plan for the Hall D Spring 2016 run.
- Schedule for the Spring 2016 run. (Dates are according to the long term calendar.)
- Oct. 1st-Oct. 7th: Electron beam restoration
- Oct. 8th-Nov. 22nd: Hall D Fall run, part 1.
- Nov. 23rd-Nov. 27th: Thanksgiving break.
- Nov. 28th-Dec. 18th: Hall D Fall run, part 2 (includes 2 day of beam restoration).
- Dec. 19th-Dec. 21st: TBD
- Every Tuesdays: 12h of beam study. Every Thursdays, if necessary: 8h of RF recovery.
- Goals for the Fall 2016 run.
- GlueX low luminosity data taking
- High luminosity trigger and DAQ tests.
- ToF checkout.
- Expected Staffing and responsibilities:
- The Run Coordinator oversees the commissioning.
- Oct. 1st-Oct. 7th A. Deur
- Sat. Oct. 8th - Wed. Oct. 19th: A. Deur
- Wed. Oct. 19th - Wed. Nov. 2nd M. Dalton
- Wed. Nov. 2nd - Wed. Nov. 16th TBD
- Wed. Nov. 16th - Mon. Nov. 22ndTBD
- Sun. Nov. 27th - Wed. Dec. 7thTBD
- Wed. Dec. 7th - Sun. Dec. 18th TBD
- Mon. Dec. 19th - Wed. Dec. 21st If RC necessary, TBD
- The Physics Division Liaison (PDL, Benedikt Zihlmann) and Hall D Work Coordinator/Safety Warden (T. Carstens) verify that the proper safety rules are followed.
- Shifts: 2 persons per shift.
- The Run Coordinator oversees the commissioning.
- Coordination Activities:
- The RC will attend the MCC meetings at 7:45am and 8:00am and the weekly MCC meeting (Wednesday, 1:30pm). The PDL will attend the weekly MCC meeting.
- Daily run meetings broadcasted on Bluejeans will occur at 8:45am in the counting house conference room. The Run Coordinator will be responsible for organizing and chairing the meeting.
- Useful links:
- Accelerator schedule
- Links to previous runplans
- Links to beam parameters/radiation level monitoring:
- Last 8-hours plots showing 1-minute, 10-minute, and hourly averages
- Same but Last 24-hours
- Same but Last 72-hours
- Week, month, and quarter (3 months) plots also exist, with similar web addresses.
- A map of the radiation monitors
Runplan
- Re-establish electron and photon beams (assume 3 days).
- Detector and beamline checkout.
- ToF tests (Benedikt Zihlmann).
- Realign old diamonds. Align new Diamonds. (Hovanes, Paul Mattione, Ken Livingston?).
- Systematic studies needed? e.g. run a different coherent peak position?)
- L1 trigger test for high-rate performance tests (Alex Somov. 8h+8h. Use up to 1 μA. DC off if necessary)
- Check rates for various beam currents and thr. settings.
- L3 high-rate performance tests (David Lawrence)
- DAQ high-rate performance tests (Sergei Furletov)
- Gluex data production
- *quadrupole off?)
- Empty target run every ?? (5h: 1h to empty/fill back the target, 2h running)). Standard production current or highest possible or both? )
- Amorphous run Every day? 1h? Standard production current?). Time to switch from pol. to unpol.: 10min. time to switch from unpol. to pol.: 30min.
- TAC runs every ?? )(Hovanes, Alex Somov, 2h? :1^+ h run, 1^- h target empty+fill))
- Physics production data with diamonds and 5 mm hole. Ratio of para./transverse data:50/50. 1h runs? Switch every 2 runs. Time to switch: 10min.
Hall D white board (current run plan)
Runplan time charts
To come.
- View Runplan google calendar
- Edit Runplan google calendar
- MCC white board
- Spreadsheet: number of triggers
Accelerator status
Hot Checkout
- Hot Check OUT Status 0% ready ; 0% checked ; 100% not ready
Readiness for Fall 16 run
- Solenoid (Eugene/Beni)
- Surveys (Tim/Tom)
- DAQ (Sergei)
- Trigger (Alex S.)
- Beam line
- Tagger hodoscope (Nathan/Franz)
- Tagger microscope (Alex B./Richard)
- Goniometer (Hovanes)
- Active collimator, profiler, flux monitor (Alex B./Hovanes)
- PS system (Alex S.)
- Polarimeter (M. Dugger/Nathan)
- Target (Alexandre D.)
- TAC (Hovanes)
- Slow control (Hovanes)
- Detector systems
- ST (Mark Ito)
- FDC (Lubomir)
- CDC (Beni)
- Bcal (Elton)
- Fcal (Adesh)
- TOF (Mark Ito/Beni/Alex. Ostrovidov)
- Online monitoring (David L.)
- Level 3 Trigger (David L.)
- Other topics?