List of FCAL Beamtest Component IDs
From GlueXWiki
This is a list of each of the detector components to be used in the FCAL beamtest. The PMT/base combinations have been kept the same throughout the testing and setup. Also, each module position and cable numbers should be matched to the ones listed below.
Contents
trigger scintillators
horizontal bars on bottom
(from top)
position | base ID | PMT ID | cable number | base barcode |
H1 | 0x732c79 | 02318 | 1585 | 20420 |
H2 | 0x72c932 | 07110 | 1327 | 20254 |
H3 | 0x72360e | 02002 | 1256 | 20466 |
H4 | 0x738545 | 8239 | 442 | 20363 |
H5 | 0x733d10 | 1593 | 149 | 20427 |
vertical bars on top
(from left, looking facing up direction)
position | V1 | V2 | V3 | V4 | V5 |
position BASE ID PMT CABLE #
V1 0x733e06 7533 518
V2 0x72dacc 4648 1069
V3 0x72bb3f 2491 1322
V4 0x72579b 5297 1577
V5 0x738516 01587 1847
spare
spare 0x7349a3 7705 ---
schematic of positions
Looked at with the lid open, the hole for the cables should
be to your bottom right.
(top view of horizontal bars on bottom)
H1 |
H2 |
H3 |
H4 |
H5 |
(top view of vertical bars on top)
position | V1 | V2 | V3 | V4 | V5 |
base ID | |||||
PMT ID | |||||
cable number |
detector modules
(looking in from the back, from left to right)
row 2 | 0x72361d | 0x7256ae | 0x72355b | 0x7349b1 | 0x72bb50 |
row 1 (bottom) | 0x72e92e | 0x72a530 | 0x72db49 | 0x7256d9 | 0x72a5c2 |