List of FCAL Beamtest Component IDs
From GlueXWiki
This is a list of each of the detector components to be used in the FCAL beamtest. The PMT/base combinations have been kept the same throughout the testing and setup. Also, each module position and cable numbers should be matched to the ones listed below.
Contents
trigger scintillators
horizontal bars on bottom
(from top)
position | base ID | PMT ID | cable number | base barcode |
H1 | 0x732c79 | 02318 | 1585 | 20420 |
H2 | 0x72c932 | 07110 | 1327 | 20254 |
H3 | 0x72360e | 02002 | 1256 | 20466 |
H4 | 0x738545 | 8239 | 442 | 20363 |
H5 | 0x733d10 | 1593 | 149 | 20427 |
vertical bars on top
(from left, looking facing up direction)
position | V1 | V2 | V3 | V4 | V5 |
base ID | 0x733e06 | 0x72dacc | 0x72bb3f | 0x72579b | 0x738516 |
PMT ID | 7533 | 4648 | 2491 | 5297 | 01587 |
cable number | 518 | 1069 | 1322 | 1577 | 1847 |
base barcode | 20367 | 20012 | 20016 | 20471 | 20380 |
spares
base ID | PMT ID | base barcode |
0x7349a3 | 7705 | 20??? |
schematic of positions
Looked at with the lid open, the hole for the cables should
be to your bottom right.
(top view of horizontal bars on bottom)
H1 |
H2 |
H3 |
H4 |
H5 |
(top view of vertical bars on top)
position | V1 | V2 | V3 | V4 | V5 |
base ID | |||||
PMT ID | |||||
cable number |
detector modules
(looking in from the back, from left to right)
row 2 | 0x72361d | 0x7256ae | 0x72355b | 0x7349b1 | 0x72bb50 |
row 1 (bottom) | 0x72e92e | 0x72a530 | 0x72db49 | 0x7256d9 | 0x72a5c2 |