Aug 13, 2013 Calorimetry

From GlueXWiki
Revision as of 15:04, 30 July 2013 by Elton (Talk | contribs) (Created page with "'<font color=red>Teleconference Time: 11:00 a.m. EST</font>'' * <font color=green>ESNET (Number is 8542553) and EVO session (GlueX Calorimetry meeting room)</font> ** [[Video C...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

'Teleconference Time: 11:00 a.m. EST

  • ESNET (Number is 8542553) and EVO session (GlueX Calorimetry meeting room)
  • Phone connection only upon request.
    • +1-866-740-1260 : US+Canada
    • +1-303-248-0285 : International
    • then enter participant code: 3421244# (remember the "#").
    • or www.readytalk.com (and code without the #)

Participant Direct Lines

  • JLab Phone: in CC F326 is 757-269-6460 (usual room)
  • JLab Phone in CC L207 is 757-269-7084
  • Phone in the Regina Videoconference Suite is 306-585-4204
  • Athens Phone: in Christina's office is 011-30-210-727-6947

Items for followup from previous meeting(s)

Tentative Agenda

  1. Announcements
  2. Action Items
  3. Monitoring
  4. BCAL
    1. SiPMs Update
      • Three units (SN: 80 JLab, 219 JLab, 1933 USM) were found to be "hazy" during installation onto the readout assemblies at JLab.
      • We have original photos from unit at USM after some cleaning. No degradation in performance was observed
      • Media:SiPMHaze1.JPG SiPM 1933 with "haze" at USM after cleaning
      • Media:SiPMHaze3 atJLab.jpg SiPM 1933 with "haze" at JLab during assembly
      • Media:SiPMHaze2.jpg SiPM 1933 with "haze" at JLab during assembly (zoom)
      • Likely the epoxy covering the sensor has been affected during handling. Carl is retesting them. Will keep these as spares.
  5. Reconstruction and Simulation
    1. Electrons from J/psi
  6. TDR update
  7. Calibration of Calorimeters
  8. Any other business

Minutes

Attendees: