Difference between revisions of "CDC prototype tilted"
From GlueXWiki
Line 28: | Line 28: | ||
− | The fits are not great but all err in the same direction. By eye I would have picked the MPVs for the histograms below at 5.5 and 3. | + | The fits are not great but all err in the same direction. Calculated MPV errors are < 1%. By eye I would have picked the MPVs for the histograms below (45 degrees and flat, ~vertical tracked hits, 50 samples integrated) at 5.5 and 3.4 x10^3 giving a ratio of 1.6. The calculated ratio of fit MPVs was 1.64 and histogram means was 1.60. Geometrically it should be 1.45 (the scintillator width allows tracks up to 15 deg each side of vertical). |
{| border="0" cellpadding="2" | {| border="0" cellpadding="2" | ||
|+Tracked hits in straw 17, track also passes through straw 23 (same column) | |+Tracked hits in straw 17, track also passes through straw 23 (same column) | ||
|[[Image:tilt_constped_vtracks_h5.png|thumb|x250px|50 samples integrated with prototype tilted and flat]] | |[[Image:tilt_constped_vtracks_h5.png|thumb|x250px|50 samples integrated with prototype tilted and flat]] | ||
|} | |} |
Revision as of 10:50, 9 February 2012
Scintillators above and below prototype, 49cm apart. Scintillator width is 13cm. Prototype placed on lower scintillator with straws at 90 degrees to long axis of scintillators.
The fits are not great but all err in the same direction. Calculated MPV errors are < 1%. By eye I would have picked the MPVs for the histograms below (45 degrees and flat, ~vertical tracked hits, 50 samples integrated) at 5.5 and 3.4 x10^3 giving a ratio of 1.6. The calculated ratio of fit MPVs was 1.64 and histogram means was 1.60. Geometrically it should be 1.45 (the scintillator width allows tracks up to 15 deg each side of vertical).