CPP Test 2020 - Schedule

• Possible test schedule by Tim Media:CPP_Tests_Aug2020.pdf

Assume that nominal the GlueX configuration consists of

• No Pb shielding
• DIRC installed
• Solenoid field at 1350 A

CPP Test Configuration

• With and without Pb shielding
• DIRC removed
• Solenoid field at 1350 A (no change)

Screenshots of test layout media:CPP_Testconfig.jpg  media:CPP_Testconfig2.jpg
media:CPP_Testconfig3.jpg  media:CPP_Testconfig4.jpg 
media:CPP_Testconfig5.jpg  media:CPP_Testconfig6.jpg

Possible sequence and times

1. CPP test DAQ setup: 2 hrs
2. Data GlueX configuration - Full Target/DIRC (repeat from Dec 2019): 2 hrs
3. Empty target
4. Data GlueX configuration - Empty Target/DIRC : 1 hr
5. Configure experiment for CPP Test: 12 hours max
6. Fill Target
7. Data CPP Test configuration- Full Target/no DIRC/1Pb : 1 hr
8. Install 1 Pb sheet: 1 hr
9. Data CPP Test Configuration - Full Target/no DIRC/ 0Pb : 1 hr
10. Install 2 Pb sheets: 1 hr
11. Data CPP Test Configuration - Full Target/no DIRC/2Pb : 1 hr
12. Empty Target : 1 hr
13. Data CPP Test configuration- Empty Target/no DIRC/1Pb : 1 hr
14. Install 1 Pb sheet: 1 hr
15. Data CPP Test Configuration - Empty Target/no DIRC/0Pb : 1 hr
16. Install 2 Pb sheets: 1 hr
17. Data CPP Test Configuration - Empty Target/no DIRC/2Pb : 1 hr
18. Fill Target
19. Restore nominal GlueX configuration: 4 hours.

Total time = 30 hours

The DIRC will have to be surveyed following the test.