Difference between revisions of "Calibration Dashboard"
From GlueXWiki
(→Spring 2015 Data Calibration Status) |
(→Spring 2015 Data Calibration Status) |
||
| Line 9: | Line 9: | ||
* <span style="color: green">green</span> - Calibrations have been done with photon beam data | * <span style="color: green">green</span> - Calibrations have been done with photon beam data | ||
| − | + | ===Low-level Calibrations=== | |
{| class="wikitable" | {| class="wikitable" | ||
! Detector | ! Detector | ||
Revision as of 15:50, 7 October 2015
Contents
Spring 2015 Data Calibration Status
This table summarizes the status of the calibrations that have been stored in the CCDB.
Last Updated -- 7 Oct 2015
- red - This category has not been calibrated
- yellow - Calibrations have been partially done, or done with cosmic ray or other non-photon beam data
- green - Calibrations have been done with photon beam data
Low-level Calibrations
| Detector | Base Time | fADC E scale | fADC gains | fADC timing | TDC timing | TDC timewalk |
|---|---|---|---|---|---|---|
| BCAL | N/A | |||||
| CDC | N/A | N/A | ||||
| FCAL | N/A | N/A | ||||
| FDC | N/A | N/A | ||||
| PS/PSC | ||||||
| Start Counter | ||||||
| TAGH | ||||||
| TAGM | ||||||
| TOF |
Notes:
- "Base time" refers to the relative timing between different detectors.
- The fADC and TDC categories refer to per-channel calibrations.
Fall 2014 Data Calibration Status
This table summarizes the status of the calibrations that have been stored in the CCDB.
Last Updated -- 10 May 2015
- red - This category has not been calibrated
- yellow - Calibrations have been partially done, or done with cosmic ray or other non-photon beam data
- green - Calibrations have been done with photon beam data
| Detector | Base Time | fADC E scale | fADC gains | fADC timing | TDC timing | TDC timewalk | Reconstructed Objects | Alignment | |
|---|---|---|---|---|---|---|---|---|---|
| BCAL | N/A | 1 2 | 1 | ||||||
| CDC | N/A | N/A | 1 | ||||||
| FCAL | 1 | 1 | N/A | N/A | |||||
| FDC | N/A | N/A | |||||||
| PS/PSC | |||||||||
| Start Counter | 1 | ||||||||
| TAGH | 1 | 1 | |||||||
| TAGM | 1 | 1 | |||||||
| TOF | 1 |
Notes:
- "Base time" refers to the relative timing between different detectors.
- The fADC and TDC categories refer to per-channel calibrations.
- The high-level reconstruction objects are the final inputs to a physics analysis. The low-level reconstruction objects are whatever objects are built from the calibrated hits and used to build the high-level objects.
Performance
Detector performance is documented in the following:
