Calibration Dashboard

From GlueXWiki
Revision as of 17:52, 7 October 2015 by Sdobbs (Talk | contribs) (Low-level Calibrations)

Jump to: navigation, search

Spring 2015 Data Calibration Status

This table summarizes the status of the calibrations that have been stored in the CCDB.

Last Updated -- 7 Oct 2015

  • red - This category has not been calibrated
  • yellow - Calibrations have been partially done, or done with cosmic ray or other non-photon beam data
  • green - Calibrations have been done with photon beam data

Low-level Calibrations

Detector Base Time fADC E scale fADC gains fADC timing TDC timing TDC timewalk
BCAL N/A
CDC N/A N/A
FCAL N/A N/A
FDC N/A N/A
PS/PSC
Start Counter
TAGH
TAGM
TOF

Notes:

  • "Base time" refers to the relative timing between different detectors.
  • The fADC and TDC categories refer to per-channel calibrations.

High-Level Calibrations

BCAL


CDC

Calibration Status
Alignment
Time-to-distance
B-field dependence
Wire/straw sag

FCAL

Calibration Status
Alignment
Non-linear shower energy

FDC


PS/PSC


Start Counter

Calibration Status
Alignment
Attenuation lengths
Propogation speed


TAGH


TAGM


TOF

Fall 2014 Data Calibration Status

This table summarizes the status of the calibrations that have been stored in the CCDB.

Last Updated -- 10 May 2015

  • red - This category has not been calibrated
  • yellow - Calibrations have been partially done, or done with cosmic ray or other non-photon beam data
  • green - Calibrations have been done with photon beam data


Detector Base Time fADC E scale fADC gains fADC timing TDC timing TDC timewalk Reconstructed Objects Alignment
BCAL N/A 1 2 1
CDC N/A N/A 1
FCAL 1 1 N/A N/A
FDC N/A N/A
PS/PSC
Start Counter 1
TAGH 1 1
TAGM 1 1
TOF 1

Notes:

  • "Base time" refers to the relative timing between different detectors.
  • The fADC and TDC categories refer to per-channel calibrations.
  • The high-level reconstruction objects are the final inputs to a physics analysis. The low-level reconstruction objects are whatever objects are built from the calibrated hits and used to build the high-level objects.


Performance

Detector performance is documented in the following:

GlueX-doc-2775 Performance of the GlueX Detector Systems