Fall 2015

Calibration data needs as of Oct. 6, 2015

Detector	Status	Data in Hand	Est. Data Needed	Est. Running Time	Notes
BCAL	More Needed	130k pi0	25-50x	43-85 hr	pi0 cluster energy > 750 MeV
CDC	OK	350 M cosmics
FCAL	More Needed	125k pi0	10x		pi0 cluster energy > 1 GeV
FDC	OK				3 shifts, 10^-4 radiator, 100 nA, no field needed
PS/PSC	OK
Start Counter	More Needed	80 M tracks	10x		basic calibrations are good, more refinement possible
TAGH	OK
TAGM	More Needed		10 M - 50 M
TOF	OK				need to verify stability of calibrations with more data

Projected running times scaled up from conditions in Run 3185. Assumes 12 GeV e- beam with 100 nA current.

Data needed depends strongly on S/B, especially for calorimeters.
Lowering thresholds can have a large effect, too
SC run list: 2931, 2932, 2933, 2934
BCAL/FCAL run list: 2931, 3185 [diamond]; 3079, 3179, 3180, 3182, 3199, 3200, 3201, 3217 [1x10-4 RL amorphous]
- Scaling factor: diamond = 8 x amorphous
CDC/FDC will need more data to calibrate fADC125 algorithm when it's deployed.

6 GeV settings: 5.5 GeV e- beam, 50 um diamond radiator, 5 mm collimator, E(gam) = 2 - 5.5 GeV
12 GeV settings: 12 GeV e- beam, 20 um diamond radiator, 3.4 mm collimator, E(gam) = 7 - 12 GeV
rate(12 GeV) / rate(6 GeV) ~ 80% [using cobrems in bggen, incl. plastic target on nose removal in 12 GeV era].
Geometrical factors: (12 GeV/6 GeV)
- SC - ~1x (straight section drives needs)
- BCAL - ~1x (both photons in BCAL)
- FCAL - ~8x (both photons in FCAL)

Run	Events	Run Time (hr)	Evts/hr
3185	19.9 M	2.2	9.0 M
2931	74.6 M	7.4	10.1 M
2932	0.4 M	0.1	4.0 M
2933	3.0 M	0.7	4.3 M
2934	3.6 M	1.5	2.4 M
3079	25.9 M	7.0	3.7 M
3179	14.6 M	1.75	8.3 M
3180	41.3 M	4.8	8.6 M
3199	4.4 M	3.0	1.5 M
3200	12.5 M	9.0	1.4 M
3201	5.6 M	5.4	1.0 M
3217	10.8 M	6.3	1.7 M

Commissioning Calibration Data