Difference between revisions of "EVO and H.323 Client"
From GlueXWiki
| Line 3: | Line 3: | ||
* Select Video Conferencing/Client Configuration | * Select Video Conferencing/Client Configuration | ||
* Change the display name to something meaningful (e.g. Regina VideoConf Room) | * Change the display name to something meaningful (e.g. Regina VideoConf Room) | ||
| − | * <font color=green>'''Enter the E.164 number and gateway'''</font> given to you when you registered your Polycom with Esnet (or the IP address of your machine). For our setup in Regina I found that the E.164 number worked well, the IP caused hang ups. <font color=green>The format is 123456@xxx.xxx.xxx.xxx where the 123456 is your E.164 number</font>. | + | * <font color=green>'''Enter the E.164 number and gateway'''</font> given to you when you registered your Polycom with Esnet (or the IP address of your machine). For our setup in Regina I found that the E.164 number worked well, the IP caused hang ups. <font color=green>The format is 123456@xxx.xxx.xxx.xxx where the 123456 is your E.164 number and all the 'x' represent the gateway you were given</font>. |
* I left the 'Connect through local KOALA' box checked and everything else to its default values. | * I left the 'Connect through local KOALA' box checked and everything else to its default values. | ||
Latest revision as of 12:26, 22 September 2009
If you wish to connect your Polycom or other similar H.323 device to an EVO meeting do the following:
- Click on the Configuration tab at the top of the KOALA window
- Select Video Conferencing/Client Configuration
- Change the display name to something meaningful (e.g. Regina VideoConf Room)
- Enter the E.164 number and gateway given to you when you registered your Polycom with Esnet (or the IP address of your machine). For our setup in Regina I found that the E.164 number worked well, the IP caused hang ups. The format is 123456@xxx.xxx.xxx.xxx where the 123456 is your E.164 number and all the 'x' represent the gateway you were given.
- I left the 'Connect through local KOALA' box checked and everything else to its default values.
