Difference between revisions of "FDC Construction Details"

From GlueXWiki
Jump to: navigation, search
(→‎Cathode/Ground Plane Construction)
 
(5 intermediate revisions by 2 users not shown)
Line 7: Line 7:
  
 
==== Details of the FDC Construction ====
 
==== Details of the FDC Construction ====
−
 
−
<!--
 
−
===== Introduction =====
 
−
-->
 
  
 
===== Global documents =====
 
===== Global documents =====
 +
[http://www.jlab.org/Hall-D/reviews_material/FDC_Readiness_Review_Mar_31_2011/Pre-Brief%20Materials/Procedures/D000000103P036.pdf Clean Room Procedures]
  
−
 
+
===== Wire Plane Construction =====
−
 
+
−
===== Wire Frame Construction =====
+
 
These documents contain all steps involved to build the wire frame including the steps after stringing:
 
These documents contain all steps involved to build the wire frame including the steps after stringing:
  
−
[http://www.jlab.org/Hall-D/reviews_material/FDC_Readiness_Review_Mar_31_2011/Pre-Brief%20Materials/Procedures/D000000103P012.pdf D000000103P012]
+
[http://www.jlab.org/Hall-D/reviews_material/FDC_Readiness_Review_Mar_31_2011/Pre-Brief%20Materials/Procedures/D000000103P012.pdf D000000103P012] FDC WIREPLANE PCB FITTING AND GLUING
  
−
[http://www.jlab.org/Hall-D/reviews_material/FDC_Readiness_Review_Mar_31_2011/Pre-Brief%20Materials/Procedures/D000000103P013.pdf D000000103P013]
+
[http://www.jlab.org/Hall-D/reviews_material/FDC_Readiness_Review_Mar_31_2011/Pre-Brief%20Materials/Procedures/D000000103P013.pdf D000000103P013] FDC WIREPLANE PCB GAS BLOCK ATTACHMENT
  
−
[http://www.jlab.org/Hall-D/reviews_material/FDC_Readiness_Review_Mar_31_2011/Pre-Brief%20Materials/Procedures/D000000103P015.pdf D000000103P015]
+
[http://www.jlab.org/Hall-D/reviews_material/FDC_Readiness_Review_Mar_31_2011/Pre-Brief%20Materials/Procedures/D000000103P015.pdf D000000103P015] FDC WIREPLANE LAMINATE THE G10/ROHACELL RING TO PCB
  
−
[http://www.jlab.org/Hall-D/reviews_material/FDC_Readiness_Review_Mar_31_2011/Pre-Brief%20Materials/Procedures/D00000-01-03-P018.pdf D000000103P018]
+
[http://www.jlab.org/Hall-D/reviews_material/FDC_Readiness_Review_Mar_31_2011/Pre-Brief%20Materials/Procedures/D00000-01-03-P018.pdf D000000103P018] FDC WIREPLANE CLEAN FOR ENTRY INTO CLEANROOM
  
−
[http://www.jlab.org/Hall-D/reviews_material/FDC_Readiness_Review_Mar_31_2011/Pre-Brief%20Materials/Procedures/D00000-01-03-P020.pdf D000000103P020]
+
[http://www.jlab.org/Hall-D/reviews_material/FDC_Readiness_Review_Mar_31_2011/Pre-Brief%20Materials/Procedures/D00000-01-03-P020.pdf D000000103P020] FDC WIREPLANE ATTACH TO STRONGBACK AND WIRING PREP
  
−
[http://www.jlab.org/Hall-D/reviews_material/FDC_Readiness_Review_Mar_31_2011/Pre-Brief%20Materials/Procedures/D00000-01-03-P024.pdf D000000103P024]
+
[http://www.jlab.org/Hall-D/reviews_material/FDC_Readiness_Review_Mar_31_2011/Pre-Brief%20Materials/Procedures/D00000-01-03-P024.pdf D000000103P024] FDC WIREPLANE SCAN WIRE POSITIONS
  
−
[http://www.jlab.org/Hall-D/reviews_material/FDC_Readiness_Review_Mar_31_2011/Pre-Brief%20Materials/Procedures/D00000-01-03-P025.pdf D000000103P025]
+
[http://www.jlab.org/Hall-D/reviews_material/FDC_Readiness_Review_Mar_31_2011/Pre-Brief%20Materials/Procedures/D00000-01-03-P025.pdf D000000103P025] FDC WIREPLANE APPLY EPOXY RING AND FIX WIRE
  
−
[http://www.jlab.org/Hall-D/reviews_material/FDC_Readiness_Review_Mar_31_2011/Pre-Brief%20Materials/Procedures/D00000-01-03-P026.pdf D000000103P026]
+
[http://www.jlab.org/Hall-D/reviews_material/FDC_Readiness_Review_Mar_31_2011/Pre-Brief%20Materials/Procedures/D00000-01-03-P026.pdf D000000103P026] FDC WIREPLANE SOLDER WIRES
  
−
[http://www.jlab.org/Hall-D/reviews_material/FDC_Readiness_Review_Mar_31_2011/Pre-Brief%20Materials/Procedures/D00000-01-03-P027.pdf D000000103P027]
+
[http://www.jlab.org/Hall-D/reviews_material/FDC_Readiness_Review_Mar_31_2011/Pre-Brief%20Materials/Procedures/D00000-01-03-P027.pdf D000000103P027] FDC WIREPLANE FREQUENCY TO TENSION MEASUREMENT
  
−
[http://www.jlab.org/Hall-D/reviews_material/FDC_Readiness_Review_Mar_31_2011/Pre-Brief%20Materials/Procedures/D00000-01-03-P029.pdf D000000103P029]
+
[http://www.jlab.org/Hall-D/reviews_material/FDC_Readiness_Review_Mar_31_2011/Pre-Brief%20Materials/Procedures/D00000-01-03-P029.pdf D000000103P029] FDC WIREPLANE INSPECT AND INITIAL ELECTRICAL TEST OF BOARD
  
−
[http://www.jlab.org/Hall-D/reviews_material/FDC_Readiness_Review_Mar_31_2011/Pre-Brief%20Materials/Procedures/D000000103P035.pdf D000000103P035]
+
[http://www.jlab.org/Hall-D/reviews_material/FDC_Readiness_Review_Mar_31_2011/Pre-Brief%20Materials/Procedures/D000000103P035.pdf D000000103P035] FDC WIREPLANE LAMINATION INSPECTION
 
<!--
 
<!--
  
Line 47: Line 42:
 
-->
 
-->
  
−
===== Cathode Construction =====
+
===== Cathode/Ground Plane Construction =====
 
These documents contain all steps in the fabrication of the cathode foil and ground planes, gluing onto the cathode frame, and soldering rigid-flex assemblies:
 
These documents contain all steps in the fabrication of the cathode foil and ground planes, gluing onto the cathode frame, and soldering rigid-flex assemblies:
  
−
[http://www.jlab.org/Hall-D/reviews_material/FDC_Readiness_Review_Mar_31_2011/Pre-Brief%20Materials/Procedures/D000000103P001.pdf D000000103P001]
+
[http://www.jlab.org/Hall-D/reviews_material/FDC_Readiness_Review_Mar_31_2011/Pre-Brief%20Materials/Procedures/D000000103P001.pdf D000000103P001] FDC CUTTING CATHODE FOIL
 +
 
 +
[http://www.jlab.org/Hall-D/reviews_material/FDC_Readiness_Review_Mar_31_2011/Pre-Brief%20Materials/Procedures/D000000103P002.pdf D000000103P002] FDC ALIGNING AND GLUING CATHODE FOIL
  
−
[http://www.jlab.org/Hall-D/reviews_material/FDC_Readiness_Review_Mar_31_2011/Pre-Brief%20Materials/Procedures/D000000103P002.pdf D000000103P002]
+
[http://www.jlab.org/Hall-D/reviews_material/FDC_Readiness_Review_Mar_31_2011/Pre-Brief%20Materials/Procedures/D000000103P003.pdf D000000103P003] FDC CATHODE GLUING ON TRANSFER RING
  
−
[http://www.jlab.org/Hall-D/reviews_material/FDC_Readiness_Review_Mar_31_2011/Pre-Brief%20Materials/Procedures/D000000103P003.pdf D000000103P003]
+
[http://www.jlab.org/Hall-D/reviews_material/FDC_Readiness_Review_Mar_31_2011/Pre-Brief%20Materials/Procedures/D00000-01-03-P004.pdf D000000103P004] FDC CATHODE FOIL TENSIONING
  
−
[http://www.jlab.org/Hall-D/reviews_material/FDC_Readiness_Review_Mar_31_2011/Pre-Brief%20Materials/Procedures/D00000-01-03-P004.pdf D000000103P004]
+
[http://www.jlab.org/Hall-D/reviews_material/FDC_Readiness_Review_Mar_31_2011/Pre-Brief%20Materials/Procedures/D000000103P005.pdf D000000103P005] FDC CATHODE GLUING FRAME TO THE FOIL
  
−
[http://www.jlab.org/Hall-D/reviews_material/FDC_Readiness_Review_Mar_31_2011/Pre-Brief%20Materials/Procedures/D000000103P005.pdf D000000103P005]
+
[http://www.jlab.org/Hall-D/reviews_material/FDC_Readiness_Review_Mar_31_2011/Pre-Brief%20Materials/Procedures/D00000-01-03-P006.pdf D000000103P006] FDC CUTTING CATHODE FOIL HOLES AND SLOTS
  
−
[http://www.jlab.org/Hall-D/reviews_material/FDC_Readiness_Review_Mar_31_2011/Pre-Brief%20Materials/Procedures/D00000-01-03-P006.pdf D000000103P006]
+
[http://www.jlab.org/Hall-D/reviews_material/FDC_Readiness_Review_Mar_31_2011/Pre-Brief%20Materials/Procedures/D000000103P009.pdf D000000103P009] FDC GLUING MYLAR TO THE TRANSFER RING
  
−
[http://www.jlab.org/Hall-D/reviews_material/FDC_Readiness_Review_Mar_31_2011/Pre-Brief%20Materials/Procedures/D000000103P009.pdf D000000103P009]
+
[http://www.jlab.org/Hall-D/reviews_material/FDC_Readiness_Review_Mar_31_2011/Pre-Brief%20Materials/Procedures/D000000103P037.pdf D000000103P037] FDC CATHODE G10 RING INSPECTION
  
−
===== Cathode Plane Construction =====
+
[http://www.jlab.org/Hall-D/reviews_material/FDC_Readiness_Review_Mar_31_2011/Pre-Brief%20Materials/Procedures/D000000103P038.pdf D000000103P038] FDC CATHODE FOIL INSPECTION AND TEST
−
These documents contain all steps involved in the cathode plen construction including critical steps like soldering the rigid flex foils and gluing the ground plane.
+
  
 
===== Stack Assembly =====
 
===== Stack Assembly =====
−
These documents contain all steps involved to assemble the FDC package.
+
These documents contain all steps involved to assemble the FDC package (not yet ready).

Latest revision as of 18:14, 30 March 2011

The GlueX FDC

Overview

Construction

Details of the FDC Construction

Global documents

Clean Room Procedures

Wire Plane Construction

These documents contain all steps involved to build the wire frame including the steps after stringing:

D000000103P012 FDC WIREPLANE PCB FITTING AND GLUING

D000000103P013 FDC WIREPLANE PCB GAS BLOCK ATTACHMENT

D000000103P015 FDC WIREPLANE LAMINATE THE G10/ROHACELL RING TO PCB

D000000103P018 FDC WIREPLANE CLEAN FOR ENTRY INTO CLEANROOM

D000000103P020 FDC WIREPLANE ATTACH TO STRONGBACK AND WIRING PREP

D000000103P024 FDC WIREPLANE SCAN WIRE POSITIONS

D000000103P025 FDC WIREPLANE APPLY EPOXY RING AND FIX WIRE

D000000103P026 FDC WIREPLANE SOLDER WIRES

D000000103P027 FDC WIREPLANE FREQUENCY TO TENSION MEASUREMENT

D000000103P029 FDC WIREPLANE INSPECT AND INITIAL ELECTRICAL TEST OF BOARD

D000000103P035 FDC WIREPLANE LAMINATION INSPECTION

Cathode/Ground Plane Construction

These documents contain all steps in the fabrication of the cathode foil and ground planes, gluing onto the cathode frame, and soldering rigid-flex assemblies:

D000000103P001 FDC CUTTING CATHODE FOIL

D000000103P002 FDC ALIGNING AND GLUING CATHODE FOIL

D000000103P003 FDC CATHODE GLUING ON TRANSFER RING

D000000103P004 FDC CATHODE FOIL TENSIONING

D000000103P005 FDC CATHODE GLUING FRAME TO THE FOIL

D000000103P006 FDC CUTTING CATHODE FOIL HOLES AND SLOTS

D000000103P009 FDC GLUING MYLAR TO THE TRANSFER RING

D000000103P037 FDC CATHODE G10 RING INSPECTION

D000000103P038 FDC CATHODE FOIL INSPECTION AND TEST

Stack Assembly

These documents contain all steps involved to assemble the FDC package (not yet ready).

Retrieved from "https://halldweb.jlab.org/wiki/index.php?title=FDC_Construction_Details&oldid=26111"