Revision as of 18:03, 4 February 2015

Video Conferencing Information

Meeting Time: 3:00 p.m. Eastern

To join via a Web Browser, go to the page [1] https://bluejeans.com/907185247.
To join via Polycom room system go to the IP Address: 199.48.152.152 (bjn.vc) and enter the meeting ID: 907185247.
To join via phone, use one of the following numbers and the Conference ID: 907185247.
- US or Canada: +1 408 740 7256 or
- US or Canada: +1 888 240 2560
Upon connection all microphones are automatically muted. To unmute your mike on a Polycom or equivalent unit, enter *4. Unmuting on a computer is trivial as there is a microphone button than can be clicked.
More information on connecting to bluejeans is available.

Announcements
- Beam schedule: opportunistic physics in the fall.
Action Items
What do we need to do before the spring run?
- Verify fixes with LED runs
- Humidity settings
- Attempt +5 C?
- Check channel efficiencies
- Verify pi0 statistics, estimate amount required
Parameters
- DAQ thresholds
- Bias voltage setting
- N_sa and N_sb
- Effective velocity
- Time offsets
- Time-walk corrections
LED pulser runs
- Verify fixes to hardware channels
- Check humidity readback/settings
- Create configuration that takes data through the TS for concurrent north and south running
- Automate and enhance scripts to analyze the pulser runs.
Cosmic-Ray runs
- Settings for cosmic runs: shall we match settings for April running?
- Can we check efficiencies for a given DAQ threshold?
- How to effectively use data triggered on the BCAL?
- How to calibrate timing?
- What simulations are needed to support all calibration?
Any other business

Attendees: Elton, Will, Noemi, Mark (JLab); Zisis, Tegan, Ahmed, Andrei (UofR)

Announcements
- Beam schedule: opportunistic physics in the fall.
Action Items
What do we need to do before the spring run?
- Verify fixes with LED runs
- Humidity settings
- Attempt +5 C?
- Check channel efficiencies
- Verify pi0 statistics, estimate amount required
Parameters
- DAQ thresholds
- Bias voltage setting
- N_sa and N_sb
- Effective velocity
- Time offsets
- Time-walk corrections
LED pulser runs
- Verify fixes to hardware channels
- Check humidity readback/settings
- Create configuration that takes data through the TS for concurrent north and south running
- Automate and enhance scripts to analyze the pulser runs.
Cosmic-Ray runs
- Settings for cosmic runs: shall we match settings for April running?
- Can we check efficiencies for a given DAQ threshold?
- How to effectively use data triggered on the BCAL?
- How to calibrate timing?
- What simulations are needed to support all calibration?
Any other business

@@ Line 59: / Line 59: @@
 ''Attendees: Elton, Will, Noemi, Mark (JLab); Zisis, Tegan, Ahmed, Andrei (UofR)
+# Announcements
+#* Beam schedule: opportunistic physics in the fall.
+# Action Items
+# What do we need to do before the spring run?
+#* Verify fixes with LED runs
+#* Humidity settings
+#* Attempt +5 C?
+#* Check channel efficiencies
+#* Verify pi0 statistics, estimate amount required
+# Parameters
+#* DAQ thresholds
+#* Bias voltage setting
+#* N_sa and N_sb
+#* Effective velocity
+#* Time offsets
+#* Time-walk corrections
+# LED pulser runs
+#* Verify fixes to hardware channels
+#* Check humidity readback/settings
+#* Create configuration that takes data through the TS for concurrent north and south running
+#* Automate and enhance scripts to analyze the pulser runs.
+# Cosmic-Ray runs
+#* Settings for cosmic runs: shall we match settings for April running?
+#* Can we check efficiencies for a given DAQ threshold?
+#* How to effectively use data triggered on the BCAL?
+#* How to calibrate timing?
+#* What simulations are needed to support all calibration?
+# Any other business