File:Sr90 collimation.gif
From GlueXWiki
Revision as of 10:43, 28 August 2008 by Zihlmann (Talk | contribs) (schematic view of the collimator for the Sr90 source. The 1mm x 1mm groove is used to fix the scintillation fiber in place. The actual collimation is done by a slit that runs parallel to the groove and is 5mm long with a width of 0.5mm (half the width of )
No higher resolution available.
Sr90_collimation.gif (355 × 188 pixels, file size: 2 KB, MIME type: image/gif)
schematic view of the collimator for the Sr90 source. The 1mm x 1mm groove is used to fix the scintillation fiber in place. The actual collimation is done by a slit that runs parallel to the groove and is 5mm long with a width of 0.5mm (half the width of the fiber).
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 10:43, 28 August 2008 | | 355 × 188 (2 KB) | Zihlmann (Talk | contribs) | schematic view of the collimator for the Sr90 source. The 1mm x 1mm groove is used to fix the scintillation fiber in place. The actual collimation is done by a slit that runs parallel to the groove and is 5mm long with a width of 0.5mm (half the width of |
- You cannot overwrite this file.
File usage
The following page links to this file:
