Difference between revisions of "GlueX TOF Meeting, July 21, 2011"
From GlueXWiki
(notes as minutes) |
(→Minutes) |
||
Line 36: | Line 36: | ||
Talks can be deposited in the directory <code>/group/halld/www/halldweb1/html/talks/2011-3Q</code> on the JLab CUE. This directory is accessible from the web at https://halldweb1.jlab.org/talks/2011-3Q/ . | Talks can be deposited in the directory <code>/group/halld/www/halldweb1/html/talks/2011-3Q</code> on the JLab CUE. This directory is accessible from the web at https://halldweb1.jlab.org/talks/2011-3Q/ . | ||
− | + | =Minutes= | |
+ | Present: | ||
+ | * '''FSU''': Paul Eugenio, Sasha Ostrovidov | ||
+ | * '''JLab''': Eugene Chudakov, Chuck Hutton, Mark Ito (chair), Simon Taylor, Beni Zihlmann | ||
− | + | ==Notes== | |
− | + | * Ian Winger sent Chuck a 3-D drawing of the split light guides. | |
− | + | * Statement of work: Paul prepared a version, but the text was lost. Mark volunteered to write a draft. | |
− | + | * Paul will be busy with his DOE annual for the next week or so. | |
− | + | * Three more light guides have been made from the UVT material. | |
− | + | ** These will be compared to non-UVT versions. | |
− | + | * FSU Physics machine shop playing with procedure for fabrication. | |
− | + | ** They are getting good finishes with the new bit. | |
− | + | * One light guide, was sent to Polymer Plastics for vapor polishing. It was due back this week. | |
− | + | * Paul has talked to folks at Eljen about how they do polishing | |
− | + | ** Although vapor polishing will give good results, it is likely not better than hand polishing. | |
− | + | ** Paul purchased got some polishing compounds to try. | |
− | + | ** The Physics Department bought a new buffing station suitable for light guides. | |
− | + | * No testing with the new light guides has been done yet. | |
+ | * Paul will send Chuck the dimenions of the steel tube. |
Revision as of 15:05, 21 July 2011
Contents
Location, Time
NOTE: new standard room, date, and time!
Thursday, July 21, 2011
10:00 am EDT
JLab: CEBAF Center, Room F326
Agenda
- Announcements
- Minutes from the last meeting
- Prototype Status [1]
- Contract Status
Communication
Videoconference
- ESNet: 8542553
- EVO: EVO site
- direct meeting link
- Phone Bridge ID: 10 4388
Telephone
- dial:
- US and Canada: (866)740-1260 (toll free)
- International: (303)248-0285 (toll call) or look up toll-free number at http://www.readytalk.com/intl
- enter access code followed by the # sign: 3421244#
Slides
Talks can be deposited in the directory /group/halld/www/halldweb1/html/talks/2011-3Q
on the JLab CUE. This directory is accessible from the web at https://halldweb1.jlab.org/talks/2011-3Q/ .
Minutes
Present:
- FSU: Paul Eugenio, Sasha Ostrovidov
- JLab: Eugene Chudakov, Chuck Hutton, Mark Ito (chair), Simon Taylor, Beni Zihlmann
Notes
- Ian Winger sent Chuck a 3-D drawing of the split light guides.
- Statement of work: Paul prepared a version, but the text was lost. Mark volunteered to write a draft.
- Paul will be busy with his DOE annual for the next week or so.
- Three more light guides have been made from the UVT material.
- These will be compared to non-UVT versions.
- FSU Physics machine shop playing with procedure for fabrication.
- They are getting good finishes with the new bit.
- One light guide, was sent to Polymer Plastics for vapor polishing. It was due back this week.
- Paul has talked to folks at Eljen about how they do polishing
- Although vapor polishing will give good results, it is likely not better than hand polishing.
- Paul purchased got some polishing compounds to try.
- The Physics Department bought a new buffing station suitable for light guides.
- No testing with the new light guides has been done yet.
- Paul will send Chuck the dimenions of the steel tube.