Difference between revisions of "GlueX TOF Meeting, June 6, 2014"

From GlueXWiki
Jump to: navigation, search
(Update)
(Update)
Line 29: Line 29:
 
==Update==
 
==Update==
  
I started checking the modules for possible light leaks and cabling problems. Below is an image of the tested modules so far. Keep in mind that TOF-N and TOF-S correspond to the horizontal plane (Y).
+
I started checking the modules for possible light leaks and cabling problems. Below is an image of the tested modules so far. All modules in the horizontal plane have been tested and problems were resolved. Keep in mind that TOF-N and TOF-S correspond to modules in the horizontal plane (Y), TOF-UP and TOF-DW correspond to modules in the vertical plane.  
  
  

Revision as of 19:02, 5 June 2014

GlueX Time-of-Flight Meeting
Friday, June 6, 2014
10:00 am EDT
JLab: CEBAF Center, F326

Agenda

  1. Announcements
  2. TOF Trigger (Sascha S.)
  3. Review of meeting on May 22
  4. Installation Update (Hussein)
    • checking the PMTs
    • read-out
  5. Software Discussion (all)
    • What are the pressing issues?

Communication

  1. To join via Polycom room system go to the IP Address: 199.48.152.152 (bjn.vc) and enter the meeting ID: 193936155
  2. To join via a Web Browser, go to the page [1] https://bluejeans.com/193936155
  3. To join via phone, use one of the following numbers and the Conference ID: 193936155
    • US or Canada: +1 408 740 7256 or
    • US or Canada: +1 888 240 2560
  4. More information on connecting to bluejeans is available.

Slides

Talks can be deposited in the directory /group/halld/www/halldweb1/html/talks/2014-2Q on the JLab CUE. This directory is accessible from the web at https://halldweb1.jlab.org/talks/2014-2Q/ .

Update

I started checking the modules for possible light leaks and cabling problems. Below is an image of the tested modules so far. All modules in the horizontal plane have been tested and problems were resolved. Keep in mind that TOF-N and TOF-S correspond to modules in the horizontal plane (Y), TOF-UP and TOF-DW correspond to modules in the vertical plane.



Testing1.JPG