Difference between revisions of "GlueX TOF Meeting, October 6, 2021"

From GlueXWiki
Jump to: navigation, search
(Created page with "GlueX Time-of-Flight Meeting<br> Wednesday, October 6, 2021<br> 11:00 am EDT<br> BlueJeans: [http://bluejeans.com/350531998 350 531 998] ==Agenda== # Announcements # Review...")
 
(added the minutes)
 
Line 11: Line 11:
 
# TOF NIM paper
 
# TOF NIM paper
 
# Action Item Recap
 
# Action Item Recap
 +
 +
== Minutes ==
 +
 +
Present: Eugene Chudakov, Mark Ito (chair), Simon Taylor, Beni Zihlmann
 +
 +
There is a [https://bluejeans.com/s/mkLTUR8xvId/ recording of this meeting]. Log into the [https://jlab.bluejeans.com BlueJeans site] first to gain access (use your JLab credentials).
 +
 +
=== Review of minutes from the last meeting ===
 +
 +
We went over the [[GlueX TOF Meeting, August 25, 2021#Minutes|minutes of the meeting on August 25]].
 +
 +
* After replacement of the FADCs, Beni performed a voltage scan, analyzed the data, and reset PMT voltages accordingly to equalize gains. A gain calibration was performed and the resulting energy calibration tables are now in the CCDB.
 +
* The RF signal, measured with a CAEN TDC in the TOF crate, is now better than it has ever been. Beni solved the issue with a wide time distribution by inserting a discriminator (with appropriate level conversion modules) in front of the jitter attenuation box [?].
 +
 +
=== News from the Run ===
 +
 +
Beni updated us on several areas of activity.
 +
 +
* The acrylic shielding near the beam line has been removed at the direction of the PrimEx leadership. The rates around the beam line look reasonable nonetheless.
 +
* Timing Calibration for PrimEx run
 +
** To get adequate statistics for the outer counters, he must analyze all of the data from any given run. The online skims do not produce enough data. This is due to the character of the PrimEx data.
 +
** He has been working on automating the calibration procedure.
 +
** The walk corrections have been done and uploaded to CCDB.
 +
 +
=== Student from SRC ===
 +
 +
Jackson Pybus, an MIT student, will be working on TOF calibration for the SRC experiment. Beni has been in contact with him and will provide advice going forward.

Latest revision as of 10:31, 7 October 2021

GlueX Time-of-Flight Meeting
Wednesday, October 6, 2021
11:00 am EDT
BlueJeans: 350 531 998

Agenda

  1. Announcements
  2. Review of minutes from the last meeting
  3. TOF II Trigger
  4. TOF NIM paper
  5. Action Item Recap

Minutes

Present: Eugene Chudakov, Mark Ito (chair), Simon Taylor, Beni Zihlmann

There is a recording of this meeting. Log into the BlueJeans site first to gain access (use your JLab credentials).

Review of minutes from the last meeting

We went over the minutes of the meeting on August 25.

  • After replacement of the FADCs, Beni performed a voltage scan, analyzed the data, and reset PMT voltages accordingly to equalize gains. A gain calibration was performed and the resulting energy calibration tables are now in the CCDB.
  • The RF signal, measured with a CAEN TDC in the TOF crate, is now better than it has ever been. Beni solved the issue with a wide time distribution by inserting a discriminator (with appropriate level conversion modules) in front of the jitter attenuation box [?].

News from the Run

Beni updated us on several areas of activity.

  • The acrylic shielding near the beam line has been removed at the direction of the PrimEx leadership. The rates around the beam line look reasonable nonetheless.
  • Timing Calibration for PrimEx run
    • To get adequate statistics for the outer counters, he must analyze all of the data from any given run. The online skims do not produce enough data. This is due to the character of the PrimEx data.
    • He has been working on automating the calibration procedure.
    • The walk corrections have been done and uploaded to CCDB.

Student from SRC

Jackson Pybus, an MIT student, will be working on TOF calibration for the SRC experiment. Beni has been in contact with him and will provide advice going forward.