Difference between revisions of "July 16, 2014 Calibration"

From GlueXWiki
Jump to: navigation, search
(Agenda)
(Agenda)
Line 24: Line 24:
 
# Other systems
 
# Other systems
 
# Simulations and Calibrations
 
# Simulations and Calibrations
 +
 +
== Agenda ==
 +
 +
Attending: Sean, Amiran (NU); Simon, Mark I., Lubomir, Mike S., Beni, Eugene, Mark D., David L. (JLab); Curtis, Naomi (CMU)
 +
 +
# Status Update
 +
#* [https://hdops.jlab.org/wiki/index.php/Hall_D_Commissioning Commissioning Plans]
 +
#* [[Constants_to_Review]]
 +
# Tracking 
 +
#* Beni reported that there appeared to be several problems affecting a small number of CDC channels on many fADC readout boards. 
 +
#*
 +
#* Mike S. thinks that there might be a problem with how the DAQ plugin is reading CDC hits in from the EVIO files and is working with David L. to address this (as of Thursday this might be fixed?).
 +
# Calorimetry
 +
#* Beni mentioned that progress is being made running the FDC/CDC + BCAL with a common DAQ system.
 +
#* Eugene discussed some issues related to the gain balancing of the BCAL.  An estimate of the amount of data needed would be useful, for cosmic and photon beam.  He pointed out the importance of making sure the subdetectors are properly situated in the global coordinate frame, and suggested that the locations of the FCAL and its components should be measured and accurately put in the software.
 +
#* Added in press: The FCAL group is currently working on software for gain balancing using LED data and putting the pi0 calibration code into a DANA plugin.
 +
# Software
 +
#* David L. reported that he's finished work on reading CAEN TDC data into DANA, and TOF hits have been seen with actual data.
 +
#* Sean reported that the simulated HDDM -> EVIO conversion is currently broken, and he will work with David L. to fix this.

Revision as of 15:59, 17 July 2014

GlueX Calibration Meeting
Wednesday, July 16, 2014
11:00 am, EDT
JLab: CEBAF Center, F326

Connection Using Bluejeans

  1. To join via Polycom room system go to the IP Address: 199.48.152.152 (bjn.vc) and enter the meeting ID: 630804895.
  2. To join via a Web Browser, go to the page [1] https://bluejeans.com/630804895.
  3. To join via phone, use one of the following numbers and the Conference ID: 630804895
    • US or Canada: +1 408 740 7256 or
    • US or Canada: +1 888 240 2560
  4. More information on connecting to bluejeans is available.

Agenda

  1. Announcements
  2. Status Update
  3. Tracking
  4. Calorimetry
  5. Other systems
  6. Simulations and Calibrations

Agenda

Attending: Sean, Amiran (NU); Simon, Mark I., Lubomir, Mike S., Beni, Eugene, Mark D., David L. (JLab); Curtis, Naomi (CMU)

  1. Status Update
  2. Tracking
    • Beni reported that there appeared to be several problems affecting a small number of CDC channels on many fADC readout boards.
    • Mike S. thinks that there might be a problem with how the DAQ plugin is reading CDC hits in from the EVIO files and is working with David L. to address this (as of Thursday this might be fixed?).
  3. Calorimetry
    • Beni mentioned that progress is being made running the FDC/CDC + BCAL with a common DAQ system.
    • Eugene discussed some issues related to the gain balancing of the BCAL. An estimate of the amount of data needed would be useful, for cosmic and photon beam. He pointed out the importance of making sure the subdetectors are properly situated in the global coordinate frame, and suggested that the locations of the FCAL and its components should be measured and accurately put in the software.
    • Added in press: The FCAL group is currently working on software for gain balancing using LED data and putting the pi0 calibration code into a DANA plugin.
  4. Software
    • David L. reported that he's finished work on reading CAEN TDC data into DANA, and TOF hits have been seen with actual data.
    • Sean reported that the simulated HDDM -> EVIO conversion is currently broken, and he will work with David L. to fix this.