Difference between revisions of "Level-1 Trigger"

From GlueXWiki
Jump to: navigation, search
(Manuals)
Line 46: Line 46:
 
=== Schedule and Activities ===
 
=== Schedule and Activities ===
 
* [[ Private: Activities from P3E schedule | Activities from P3E schedule ]]
 
* [[ Private: Activities from P3E schedule | Activities from P3E schedule ]]
 +
 +
=== Detector Commissioning ===
 +
* [[ Private: Trigger Types | Trigger Types ]]
  
 
=== Manuals ===
 
=== Manuals ===

Revision as of 09:16, 2 August 2013

Level 1 Group Members

Level 1 Trigger Goal

The main goal of the GlueX experiment is the search of exotic mesons produced in interactions of 8.4 - 9.0 GeV linearly polarized beam photons with a liquid hydrogen target. The beam photons are created by the 12 GeV electrons incident on a diamond crystal via bremsstrahlung process. The GlueX detector will start taking data at a luminosity corresponding to about 107 photons per second in the photon-beam energy range of 8.4 < Eγ < 9.0 GeV. The Level-1 trigger has to reduce the rate from electromagnetic and hadronic interactions seen by the GlueX detector to a level acceptable by a data acquisition for writing events directly to tape, about 20 kHz. Later, the luminosity will be increased by an order of magnitude to 108 photons per second. For high-luminosity runs, events accepted by the Level-1 trigger will be sent to the thirt level trigger at the rate which should not exceed 200 kHz. The Level-3 trigger will perform an event reconstruction on a PC farm allowing to further reduce low-energy photon interactions and providing an additional rate reduction of about factor of 10. At the same time, the Level-1 trigger has to accept all multi-particle exotic meson candidates produced in the beam energy range E > 8 GeV.

Level 1 Trigger Algorithm

Trigger Hardware

Reviews and Meetings

Beam Tests

Test Setups

Schedule and Activities

Detector Commissioning

Manuals

Useful Links

How To