Revision as of 12:19, 4 March 2010

Teleconference Time: 11:00 a.m. EST

• ESNET and EVO session
• Phone in CC F326 is 757-269-6337
• Phone in the Regina Videoconference Suite is 306-585-4204
• Phone only if requested:
  • +1-800-377-8846 : US
  • +1-888-276-7715 : Canada
  • +1-302-709-8424 : International
  • then enter participant code: 77438230# (remember the "#"). Phone line by request only.

Items for followup from previous meeting(s)

1. Calibration/Monitoring
   • Geometry for inputing monitoring sources into Bcal (Media:mom_gamma_log.png)
2. Fcal
   • Specify the number of Rad Hard blocks to writeup a change request to the project.
   • Investigate mechanical issues associated with supporting lead glass on top of shashlyk modules (Lubomir, Serguei). Will to send drawings of the modules.
3. Bcal
   • Specify the normalization and dynamic range for the number of photons/GeV in showers
   • Decide on specific grouping for SiPM sums
   • Possibility of using air gap for SiPM coupling
   • Finalize shapes of "Winston guides"
4. Simulations:
   • List of energies and angles to be simulated for the purpose of establishing the dynamic range of light to the SiPMs.

Documents to Review

Tentative Agenda

1. Announcements
2. Review of Action Items
3. Calibration/Monitoring
   1. Light sources in Bcal
   2. Project schedule
      • FCAL activity Fab monitoring system 15222080 (delayed by a year in Oct)
      • BCAL activity Proc aux equipment incl. calibration 15221055
4. FCAL
   1. Radiation Damage Inserts
      • Shashlyk option
   2. Procurement Contract
      • EVMS reporting and project schedule
      • Scheduling the Fcal Fabrication Readiness Review
   3. Update on FEU-84-3 PMTs slides
5. BCAL
   1. Construction Status
   2. Fibre tests Media:Shipments8and9plots.pdf
6. BCAL Readout
   1. Simulations
   2. SiPMs
      • Measurements at USM
   3. Geometry for guides, sensors, cooling and cables
   4. Update on USM MOU
7. Other business

Minutes

Attendees:

1. BCAL
   1. Construction
      1. All equipment operating nominally. Builds growing within tolerances.
      2. Mod 04 to RMS today or tomorrow; Mod 05 at 50%, Mod 06 at 10%. Two new crates arrived yesterday.
      3. Mod 02 and 03 machining most likely finished.
      4. Lead tally nearly done; some discrepancies. Will communicate with JLab and Vulcan today.
      5. Enough epoxy for 2.5 months on hand, 9 gallons back ordered.
      6. Shipping insurance sorted out and waiting to meet with shippers and get new quotations.
   2. Fibres
      1. Shipment 8 done and 100 fibres from No. 9 (see above links). Means shifted for shipment 9, for both Npe and atten length. Most likely a real effect but we're checking.
   3. RMS visit: March 5.
      1. Final contract will be given to RMS tomorrow.
      2. Inspection and pictures of Mod 02 and 03 machining.
      3. Transmission uniformity test on Module 01.