May 21, 2020 CPP Design Meeting

From GlueXWiki
Revision as of 06:31, 4 June 2020 by Whitey (Talk | contribs) (Minutes and Action Items)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Meeting Time and Place =

Thursday May 21, 2020, 1:30pm Bluejeans https://bluejeans.com/735541157/3638?src=calendarLink

  • Present - Elton, Dave, Stephanie, Llya, Rory (remote)

Agenda

Minutes and Action Items

  • Reviewed minutes of last meeting
  • Discussed RF shielding over electronics board - they will be capped at the ends - UMASS will have them fabricated
  • The new chambers have a 2" hole in the center - this will be uncovered during installation
  • The hole in all the iron pieces to be 8cm square with radius corners
  • Hole in stationary lead to be 10cm square with radius corners
  • Adjustable lead to be 14cm square with 8cm square hole,10cm thick. +/- 1cm movement and must be locally adjustable
  • material for lead adjustment should be somewhat symmetrical and consistent all around
  • we should plan on removing the vertical cable organizers since things are getting tight
  • Discussed possible testing scenarios for the summer run - need to make decision on configurations
  • Next meeting we can go over possible procurements
  • Set up new meeting in 2 weeks