Revision as of 17:34, 31 October 2013

October 31, 2013 FDC meeting

Agenda

Installation [1]
- FDC survey and rail alignment (Tim, Bill)Survey results_1, Survey results_2
- FDC installation on platform: [2], [3], [4], [5]
Engineering (Bill)
Electronics (Chris, Nick) list of cables Nick's presentation about cable locations on platform
Tests in EEL126 FDC E-log (Beni)
- New F1TDC
Other

@@ Line 23: / Line 23: @@
 - Therefore Tim, Bill, Tom proposed (and everybody agreed) to try to do survey when the FDC is inside in final position connected with cables. Most of the discussions: if it is possible, and how to do it. For the outer packages everybody agrees it is doable. For the inner packages there must be different solutions, but for now Bill will start looking for non-magnetic targets to be installed in points visible from the sides when the FDC is inside the magnet.
-- The short term plan: since we think the survey of the FDC in final position is doable we can go ahead and put FDC back on the platform (on Friday). Then we will move it in and out of the magnet and do the survey in both positions. After that we can start cabling.
+- The short term plan: since we think the survey of the FDC in final position is doable we can go ahead and put FDC back on the platform (on Friday). Then we will move it in and out of the magnet and do the survey in both positions. Tom will have people working on the cable mesh. After it's done we can start cabling.
--
+- FDC was moved to the Hall a week ago (Oct 24) (see pictures attached).
 == Engineering ==