Difference between revisions of "Minutes-5-30-2013"
From GlueXWiki
| Line 25: | Line 25: | ||
- Beni and Bill measured the max temperature on one of the card at the voltage regulator: no more than 43degC with the cooling system running. Beni: when turning the cooling system on, the temperature on the voltage regulator changes very fast indicating good thermal contact to the cooling tube. | - Beni and Bill measured the max temperature on one of the card at the voltage regulator: no more than 43degC with the cooling system running. Beni: when turning the cooling system on, the temperature on the voltage regulator changes very fast indicating good thermal contact to the cooling tube. | ||
| − | - Bill once more on the SMC power: the chiller produces 2kW from the pump + 2kW from the compressor + max 2kW removed heat. Eugene: using 4kW to remove 2kW is something standard for such cooling | + | - Bill once more on the SMC power: the chiller produces 2kW from the pump + 2kW from the compressor + max 2kW removed heat. Eugene: using 4kW to remove 2kW is something standard for such cooling systems. |
| − | - Beni started working on the | + | - Beni started working on Linux interface to the SMC chiller using USB to RS485 adapter. His plan is to test the communication and make some basic control functions, that need to be discussed further. |
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
== Full electronics tests == | == Full electronics tests == | ||
| − | - Beni | + | - Beni can now read the new fADC125 modules; demonstrated it by reading three such modules. The basic firmware/software made by Cody and Bryan allows to read the row data from the modules. |
- The truck was not available this week, so we will move the package next week. As discussed above, we will use water for cooling. | - The truck was not available this week, so we will move the package next week. As discussed above, we will use water for cooling. | ||
Revision as of 17:01, 30 May 2013
May 30, 2013 FDC meeting
Agenda
- Production Construction Tracking
- Spare package status
- Engineering (Bill)
- Cooling system test
- Full electronics test (Beni)
- Other
