Revision as of 14:37, 21 July 2011

Agenda

Announcements
Review of minutes from 22-Jun-2011 meeting
Report on translation table to Offline group - Elliott
rawevent and danaevio plugins - Elliott
Controls test stand - Hovanes
IRMIS - Elliott
Root-based server/client for monitoring ROCs - Sasha
Event display and communication with DANA - Elliott, Andrew, Dave
Multi-crate trigger test - Bryan
Event size and raw event format - Dave, Carl
FDC cosmic ray test - Beni
Electronics, trigger and DAQ status reports - Chris, Alex, Dave, Fernando, Ben, Ed, William, Bryan
Mantis Task Tracker

1:30 PM Wed 20-Jul-2011 CC F326

Not sure due to summer vacations

There was a meeting where they discussed who will work on the threes tasks specified by Elliott:

Test stand is in Room 126 in EEL building.
Currently includes a VME crate, CAEN SY1527 HV crate, AB 1756 chassis with a processor, 1734 chassis on a DIN-rail.
EPICS driver for VME/VXS crate control exists and working.
CAEN SY1527 EPICS driver in progress.
PLC firmware and software is being stalled.
The problem with DHCP and PXE booting for the new Linux-based VME CPUs has not been resolve. The CPUs boot on Bryan's and Sergey's networks, but they did not get DHCP offer (may be 1 out of 10) on 36 subnet.

Sasha is developing a software to quickly request information from ROCs based on ROOT classes. This will help him in development of the trigger software using FADCs.
The work is in progress, one of the goals is to specify what we need to specify to electronics group for the scalers on FADCs.

Andrew could not connect to JLab last couple of weeks due to the cyber event.
Event display is done except for 3D related itmes.
DANA-event display communication is complete.
Andrew can work on this project up until May.
The software is kept in CLAS12 SVN repository.
The geometry of the Event Display is defined in a file. The DANA reconstruction also uses another file to define geometry, so the geometry is taken from 3 different places.

@@ Line 41: / Line 41: @@
 :* Simulation of raw data - Carl
 :* Automated readout list - Bryan
+=== Test Stand ===
+* Test stand is in Room 126 in EEL building.
+* Currently includes a VME crate, CAEN SY1527 HV crate, AB 1756 chassis with a processor, 1734 chassis on a DIN-rail.
+* EPICS driver for VME/VXS crate control exists and working.
+* CAEN SY1527 EPICS driver in progress.
+* PLC firmware and software is being stalled.
+* The problem with DHCP and PXE booting for the new Linux-based VME CPUs has not been resolve. The CPUs boot on Bryan's and Sergey's  networks, but they did not get DHCP offer (may be 1 out of 10) on 36 subnet.