Revision as of 08:14, 25 October 2008

NEW TIME Time: 11:15 ET.

• Phone:
  • +1-800-377-8846 : US
  • +1-888-276-7715 : Canada
  • +1-302-709-8424 : International
  • then enter participant code: 39527048# (remember the "#")

Items for followup from Oct 13 meeting

1. Each subsystem must complete blanks in the Calibration Specification Table.
2. Decision on Bcal sampling fraction needed if any changes are to be made to design.
3. Resolution studies (Blake)
   • Develop criteria for evaluating resolution studies
   • Up-to-date geometry ONGOING.
   • Decreased threshold for FM pmts. ONGOING
   • Position resolution - understand dependence on granularity.
   • Different segmentation for the outer section. - LOWER PRIORITY
4. Study impact of inactive material at the end of Bcal on acceptance.
5. Add F100 rad hard glass to simulation. - New graduate student has been assigned this project.
6. Add roadmap for Bcal Roadmap to wiki (Elton)

Documents to Review

Tentative Agenda

1. Announcements
2. Calibration
   • Progress on filling in the Calibration Specification Table.
3. Fcal
4. Bcal
   • Decision on use of Getter#1 and no Getter units in the construction of arrays
     • Summary of delivered units
     • Original plan was all Getter#1 devices. Sensl now proposes a 50/50 split, Elke has proposed 80/20 plit.
   • Decision on lead thickness -- Updates on sampling studies (Stamatis)
     • What is the gain? What needs to be tested if a change is desired?
   • Roadmap toward a decision for the Bcal readout
   • Updates on resolution studies (Blake)
   • Visit to Alberta
     • Schedule a phone conference for followup

Minutes

Attending: