Difference between revisions of "Offline Monitoring Data Validation"

From GlueXWiki
Jump to: navigation, search
(Checklist)
(Run Statuses)
Line 25: Line 25:
 
*  1 - approved
 
*  1 - approved
 
*  2 - approved long/"mode 8" data
 
*  2 - approved long/"mode 8" data
 +
*  3 - calibration / systematic studies
  
 
= Checklist =  
 
= Checklist =  

Revision as of 17:28, 10 July 2018

This page contains the procedure for checking if production runs are of good quality and can be used for physics analysis.

Run Periods

Procedure

For each production run, do the following:

  • Go to the | Offline Run Browser page.
  • Follow the steps outlined in the checklist below.
  • Certify that each section is okay
    • (DB + script to be developed)
  • Set run status = 1 in RCDB
    • (script provided)

Run Statuses

  • -1 - unchecked
  • 0 - rejected (not physics-quality)
  • 1 - approved
  • 2 - approved long/"mode 8" data
  • 3 - calibration / systematic studies

Checklist

Reference run: 30780 (5 files)

  • BCAL
    • Check Occupancy - Reference: [ link ]
    • Check Hit Efficiency - Reference: [ link ]
    • Check BCAL Recon. 1 - Reference: [ link ]
    • Check BCAL Recon. 2 - Reference: [ link ]
    • Check BCAL Matching - Reference: [ link ]
  • CDC
    • Check Occupancy - Reference: [ link ]
    • Check Time-to-distance - Reference: [ link ]
  • FCAL
    • Check Occupancy - Reference: [ link ]
    • Check FCAL Hits 1 - Reference: [ link ]
    • Check FCAL Hits 2 - Reference: [ link ]
    • Check FCAL Clusters 1 - Reference: [ link ]
  • FDC
    • Check Package 1 Occupancy - Reference: [ link ]
    • Check Package 2 Occupancy - Reference: [ link ]
    • Check Package 3 Occupancy - Reference: [ link ]
    • Check Package 4 Occupancy - Reference: [ link ]
  • PS
    • Check - Reference: [link]
    • Check - Reference: [link]
    • Check - Reference: [link]
    • Check - Reference: [link]
    • Check - Reference: [link]
  • SC
    • Check - Reference: [link]
    • Check - Reference: [link]
    • Check - Reference: [link]
    • Check - Reference: [link]
    • Check - Reference: [link]
  • TAGH
    • Check - Reference: [link]
    • Check - Reference: [link]
    • Check - Reference: [link]
    • Check - Reference: [link]
    • Check - Reference: [link]
  • TAGM
    • Check - Reference: [link]
    • Check - Reference: [link]
    • Check - Reference: [link]
    • Check - Reference: [link]
    • Check - Reference: [link]
  • TOF
    • Check - Reference: [link]
    • Check - Reference: [link]
    • Check - Reference: [link]
    • Check - Reference: [link]
    • Check - Reference: [link]
  • RF
    • Check timing offsets - Reference: [ link ]
      • Should be centered around zero
  • Timing
    • Check Track Matched Timing - Reference: [link]
    • Check Tagger/RF Timing - Reference: [link]
    • Check Tagger/SC Timing - Reference: [link]
  • Analysis
    • Check - Reference: [link]
    • Check - Reference: [link]
    • Check - Reference: [link]
    • Check - Reference: [link]
    • Check - Reference: [link]