Offline Monitoring Data Validation

This page contains the procedure for checking if production runs are of good quality and can be used for physics analysis.

Run Periods

• RunPeriod-2016-02 Validation
• RunPeriod-2016-10 Validation
• RunPeriod-2017-01 Validation
• RunPeriod-2018-01 Validation

Procedure

For each production run, do the following:

• Go to the | Offline Run Browser page.
• Follow the steps outlined in the checklist below.
• Certify that each section is okay
  • (DB + script to be developed)
• Set run status = 1 in RCDB
  • (script provided)

Run Statuses

• -1 - unchecked
• 0 - rejected (not physics-quality)
• 1 - approved
• 2 - approved long/"mode 8" data

Checklist

Reference run: 30780 (5 files)

• BCAL
  • Check Occupancy - Reference: [ link ]
  • Check Hit Efficiency - Reference: [ link ]
  • Check BCAL Recon. 1 - Reference: [ link ]
  • Check BCAL Recon. 2 - Reference: [ link ]
  • Check BCAL Matching - Reference: [ link ]
• CDC
  • Check - Reference: [link]
• FCAL
  • Check ...
• FDC
  • Check ...
• PS
  • Check ...
• SC
  • Check ...
• TAGH
  • Check ...
• TAGM
  • Check ...
• TOF
  • Check ...
• RF
  • Check timing offsets - Reference: [ link ]
    • Should be centered around zero
• Timing
  • Check Track Matched Timing - Reference: [link]
  • Check Tagger/RF Timing - Reference: [link]
  • Check Tagger/SC Timing - Reference: [link]
• Analysis
  • Check ...