Difference between revisions of "Offline Monitoring Incoming Data"

Revision as of 14:15, 28 September 2016

Saving Online Monitoring Data

The procedure for writing the data out is given in, e.g., Raid-to-Silo Transfer Strategy.

Once the DAQ writes out the data to the raid disk, cron jobs will copy the file to tape, and within ~20 min., we will have access to the file on tape at /mss/halld/$RUN_PERIOD/rawdata/RunXXXXXX.

All online monitoring plugins will be run as data is taken. They will be accessible within the counting house via RootSpy, and for each run and file, a ROOT file containing the histograms will be saved within a subdirectory for each run.

For immediate access to these files, the raid disk files may be accessed directly from the counting house, or the tape files will be available within ~20 min. of the file being written out.

Preparing the software

• Do the exact same steps as detailed for the offline monitoring and reconstruction setup EXCEPT:
  • Replace "monitoring_launch" with "monitoring_incoming."
  • Don't create a CCDB sqlite file.

Starting A New Run Period

• Do the exact same steps as detailed in "Starting a new run period" at Link

Launching for a new run period

1) Download the "monitoring" scripts directory from svn. For the gxprojN accounts, use the directory ~/monitoring/:

cd ~/
svn co https://halldsvn.jlab.org/repos/trunk/scripts/monitoring/
cd monitoring/incoming
chmod 755 script.sh    #Fix the permissions!

2) Edit the job config file, ~/monitoring/incoming/input.config, which is used to register jobs in hdswif. The version # should be "01." A typical config file will look this:

PROJECT                       gluex
TRACK                         reconstruction
OS                            centos65
NCORES                        24        
DISK                          40
RAM                           18
TIMELIMIT                      4
NTHREADS                      24
JOBNAMEBASE                   offmon
RUNPERIOD                     2016-02
VERSION                       01
OUTPUT_TOPDIR                 /cache/halld/offline_monitoring/RunPeriod-[RUNPERIOD]/ver[VERSION] # Example of other variables included in variable
SCRIPTFILE                    /home/gxproj1/monitoring/incoming/script.sh                        # Must specify full path
ENVFILE                       /home/gxproj1/env_monitoring_incoming                              # Must specify full path
PLUGINS                       TAGH_online,TAGM_online,BCAL_online,CDC_online,CDC_expert,FCAL_online,FDC_online,ST_online_lowlevel,ST_online_tracking,TOF_online,PS_online,PSC_online,PSPair_online,TPOL_online,TOF_TDC_shift,monitoring_hists,danarest,BCAL_Eff,p2pi_hists,p3pi_hists,HLDetectorTiming,BCAL_inv_mass,trackeff_missing,TRIG_online,CDC_drift,RF_online,BCAL_attenlength_gainratio,BCAL_TDC_Timing

3) Create a new swif workflow for running all of the incoming data (e.g. <workflow> = offline_monitoring_RunPeriod2016_02_ver01_hd_rawdata):

~/monitoring/hdswif/hdswif.py create [workflow] -c ~/monitoring/incoming/input.config

4) In ~/monitoring/incoming/cron_exec.csh, modify the script to run for the new run period E.g. for 2016-02:

~/monitoring/incoming/cron_exec.csh

5) Before launching the cron job, manually run the script first. This is just in case there are already a lot of files on disk, and it takes longer than 15 minutes to run the first execution. In this case, jobs may be double-submitted! So, first execute the python script manually:

python ~/monitoring/incoming/process_incoming.py 2016-02 ~/monitoring/incoming/input.config 20 >& ~/incoming_log.txt

6) Now that the initial batch of jobs have been submitted, launch the cron job by running:

crontab cron_incoming

7) To check whether the cron job is running, do

crontab -l

8) The stdout & stderr from the cronjob are piped to a log file located at:

~/incoming_log.txt

9) Periodically check how the jobs are doing, and modify and resubmit failed jobs as needed (where <problem> can be one of SYSTEM, TIMEOUT, RLIMIT):

swif status <workflow>
~/monitoring/hdswif/hdswif.py resubmit <workflow> <problem>

10) To remove the cron job (e.g. at the end of the run) do

crontab -r